EPDM Elastomer and Biothermoplastic Polyester-based Silicate-layered Multifunctional Nanocomposites Incorporated with Poly(MA-alt-α-olefin)-g-APTS-SiO₂ NPs and PP-g-MA by Reactive Extrusion Nanotechnology

References

• Rzayev, Z.M.O. Advances in Polyolefin Nanocomposites. In: Mittal, V. ed. Polyolefin Nanocomposites by Reactive Extrusion. CRC Press, Taylor & Francis Group: New York, 2011, Chapter 4; pp. 87–127.
   Google Scholar
• Sanchez, C.; Julian, B.; Belleville, P.; Popall, M. Applications of hybrid organic-inorganic nanocomposites. J. Mater. Chem. 2005, 15, 3559–3592.
   Web of Science ®Google Scholar
• Novak, B.M. Hybrid nanocomposite materials-between inorganic glasses and organic polymers. Adv. Mater. 1993, 5, 422–433.
   Web of Science ®Google Scholar
• Mark, J.E. The sol-gel route to inorganic-organic composites. Chem. Rev. 1996, 3, 307–526.
   Web of Science ®Google Scholar
• Rzayev, Z.M.; Bryksina, L.V.; Kyazimov, S.K.; Sadykh-Zade, S.I. Radical copolymerization of maleic anhydride, styrene and vinyltriethoxysilane. Polym. Sci. U. S. S. R. 1972, A14, 259–267.
   Google Scholar
• Rzayev, Z.M.O.; Güner, A.; Can, H.K.; Aşici, A. Reactions of some anhydride-containing copolymers with γ-aminopropyltriethoxysilane. Polym. 2001, 42, 5599–5606.
   Web of Science ®Google Scholar
• Bozdoğan, D.D.; Kibarer, G.; Rzayev, Z.M.O. Morphological investigation of in situ generated silica nanoparticles encapsulated with poly(MA-alt-α-olefin) (C6–18) copolymers. Polym. Bull. 2013, 70, 3185–3200.
   Web of Science ®Google Scholar
• Messori, M. Book Recent Advances in Elastomeric Nanocomposites. In: Mittal, V. Kim, J.K. Pal, K. eds. In situ synthesis of rubber nanocomposites, Springer-Verlag Berlin Heidelberg: Berlin, 2011, pp. 57–85.
   Google Scholar
• Das, A.; Jurk, R.; Stockelhuber, K.W.; Heinrich, G. Silica-ethylene propylene diene monomer rubber networking by in situ sol-gel method. J. Macromol. Sci. Part A-Pure Appl. Chem. 2008, 45, 101–106.
   Web of Science ®Google Scholar
• Wu, T.M.; Chu, M.S. Preparation and characterization of thermoplastic vulcanizate/silica nanocomposites. J. Appl. Polym. Sci. 2005, 98, 2058–2063.
   Web of Science ®Google Scholar
• Acharya, H.; Pramanik, M.; Srivastava, S.; Bhowmick, A. Synthesis and evaluation of high-performance ethylene-propylene-diene terpolymer/organoclay nanoscale composites. J. Appl. Polym. Sci. 2004, 93, 2429–2436.
   Web of Science ®Google Scholar
• Ahmadi, S.; Huang, Y.; Li, W. Fabrication and physical properties of EPDM/organoclay nanocomposites. Compos. Sci. Technol. 2005, 65, 1069–1076.
   Web of Science ®Google Scholar
• Wu, Y.; Ma, Y.; Wang, Y.; Zhang, L. Effects of characteristics of rubber, mixing and vulcanization on the structure and properties of rubber/clay nanocomposites by melt blending. Macromol. Mater. Eng. 2004, 289, 890–894.
   Web of Science ®Google Scholar
• Yang, H.; Zhang, X.; Qu, C.; Li, B.; Takeda, K. Lagely improved thoughness of PP/EPDM blends by adding nano-SiO2 ternary composites. Polym. 2007, 48, 860–869.
   Web of Science ®Google Scholar
• Yang, H.; Zhang, X.; Guo, M.; Wang, C.; Du, R.N.; Fu, Q. Study of phase structures and toughening mechanism in PP/EPDM/SiO2 ternary composites. Polym. 2006, 47, 2106–2115.
   Web of Science ®Google Scholar
• Chang, Y.-W.; Yang, Y.; Ryu, S.; Nah, C. Preparation and properties of EPDM/organo-montmorillonite hybrid nanocomposites. Polym. Int. 2002, 51, 319–324.
   Web of Science ®Google Scholar
• Naderi, G.; Lafleur, P.G.; Dubois, C. Microstructure-properties correlations in dynamically vulcanized nanocomposite thermoplastic elastomer based on PP/EPDM. Polym. Eng. Sci. 2007, 47, 207–217.
   Web of Science ®Google Scholar
• Vijayalekshmi, V.; Abdul Majeed, S.S.M. Mechanical, thermal and electrical properties of EPDM/silicone blend nanocomposites. Int. J. Eng. Res. Appl. 2013, 3 (2), 1177–1180.
   Google Scholar
• Kole, S.; Roy, S.; Browmick, A.K. Interaction between silicone and EPDM rubbers through functionalization and its effect on properties of the blend. Polym. 1994, 35, 3423–3426.
   Web of Science ®Google Scholar
• Usuki, A.; Tukigase, A.; Kato, M. Preparation and properties of EPDM-clay hybrids. Polym. 2000, 43, 2185–2189.
   Web of Science ®Google Scholar
• Wang, Z.-H.; Lu, Y.-L.; Liu, J.; Dang, Z.-M.; Zhang, L.-Q.; Wang, W. Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties. Polym. Adv. Technol. 2011, 22, 2302–2310.
   Web of Science ®Google Scholar
• Payne, A.R. Dynamic properties of heat-treated butyl vulcanizates. J. Appl. Polym. Sci. 1963, 7, 873–885.
   Google Scholar
• Mousa, A. Cure characterizations and thermal properties of sulfur-cured EPDM-based composites by compounding with layered nano-organoclay. Polym.-Plast. Technol. Eng. 2006, 45, 911–915.
   Web of Science ®Google Scholar
• Rajeev, R.S.; De, S.K.; Bhowmick, A.K.; John, B. Studies on thermal degradation of short melamine fibre reinforced EPDM, maleated EPDM and nitrile rubber composites. Polym. Degrad. Stab. 2003, 79 (3), 449–463.
   Web of Science ®Google Scholar
• Mitra, S.; Ghanbari-Siahkali, A.; Kingshott, P.; Rehmeier, H.K.; Abildgaard, H.; Almdal, K. Chemical degradation of crosslinked ethylene-propylene-diene rubber in an acidic environment. Part I. Effect on accelerated sulphur crosslinks. Polym. Degrad. Stab. 2006, 91 (1), 69–80.
   Web of Science ®Google Scholar
• Konar, J.; Samanta, G.; Avasthi, B.N.; Sen, A.K. Oxidative degradation of EPDM rubber using phase transferred permanganate as oxidant. Polym. Degrad. Stab. 1994, 43 (2), 209–216.
   Web of Science ®Google Scholar
• Wang, Y.; Liu, L.; Luo, Y.; Jia, D. Aging behavior and thermal degradation of fluoroelastomer reactive blends with poly-phenol hydroxy EPDM. Polym. Degrad. Stab. 2009, 94 (3), 443–449.
   Web of Science ®Google Scholar
• Tian, M.; Zhang, X.; Zhang, L.; Yin, S.; Nishi, T.; Ning, N. Interfacial enhancement of fibrillar silicates (FSs)/ EPDM nanocomposites by surface modification of FS in supercritical CO2. Compos. Sci. Technol. 2013, 79, 21–27.
   Web of Science ®Google Scholar
• Stelescu, D.M.; Airinei, A.; Homocianu, M.; Fifere, N; Timpu, D.; Aflori, M. Structural characteristics of some high density polyethylene/EPDM blends. Polym. Test. 2013, 32, 187–196.
   Web of Science ®Google Scholar
• Gunatillake, P.; Mayadunne, R.; Adhikari, R. Recent developments in biodegradable synthetic polymers. Biotechnol. Annu. Rev. 2006, 12, 301–347.
   PubMedGoogle Scholar
• Garkhal, K.; Verma, S.; Tikoo, K.; Kumar, N. Surface modified poly (L-lactide-co-ϵ-caprolactone) microspheres as scaffold for tissue engineering. Biomed. Mater. Res. A 2007, 82, 747–756.
   PubMed Web of Science ®Google Scholar
• Wen, X.; Zhang, K.; Wang, Y.; Han, L.; Han, C.; Zhang, H.; Chen, S.; Dong, L. Study of the thermal stabilization mechanism of biodegradable poly(L-lactide)/silica nanocomposites. Polym. Int. 2010, 60, 202–210.
   Web of Science ®Google Scholar
• Krishnamachari, P.; Zhang, J.; Lou, J.; Yan, J.; Uitenham, L. Biodegradable poly(lactic acid)/clay nanocomposites by melt intercalation: A study of morphological, thermal, and mechanical properties. Int. J. Polym. Anal. Charac. 2009, 14, 336–350.
   Web of Science ®Google Scholar
• Ouyang, W.Z.; Huang, Y.; Luo, H.J.; Wang, D.S. Preparation and properties of poly(lactic acid)/cellulolytic enzyme lignin/PGMA ternary blends. Chinese Chem. Lett. 2012, 23, 351–364.
   Web of Science ®Google Scholar
• Dilmani, M.A.; Rzayev, Z.M.O.; Alper, E. Functional copolymer/organo-MMT nanoarchitectures. XIII. EPDM rubber/poly (MA-alt-1-octadecene)-g-PEO/organoclays nanocomposites through reactive extrusion. Int. Rev. Chem. Eng.-Rapid Commun. 2012, 4 (1), 91–104.
   Google Scholar
• Rzayev, Z.M.O. Graft copolymers of maleic anhydride and its isostructural analogues: High performance engineering materials. Int. Rev. Chem. Eng. 2011, 3, 153–215.
   Google Scholar
• Göçmen, B.A.; Demircan, D.; Rzayev, Z.M.O.; Kibarer, G. Multifunctional PP-based nanocomposites incorporated with organoclays, poly(MA-alt-1-dodecene)-g-SiO2 nanoparticles and bioengineering polyesters in melt by reactive extrusion. Polym. Plast. Technol. Eng. 2017, 56 (6), 647–666.
   Web of Science ®Google Scholar
• Vermeech, I.M.; Groeninckx, G.; Coleman, M.M. Poly(styrene-co-N-maleimide copolymers by reactive extrusion, molecular characterization by FTIR, and use in blend. Macromolecules. 1993, 26, 6643–6649.
   Web of Science ®Google Scholar
• Mirabella, F.M.; Bafna, A. Determination of the crystallinity of polyethylene/α -olefin copolymers by thermal analysis: Relationship of the heat of fusion of 100% polyethylene crystal and the density. J. Polym. Sci. B, Polym. Phys. 2002, 40, 1637–1643.
   Web of Science ®Google Scholar
• Carreau P.J., Kee D., Chabra R.P. Rheology Preparation Polymeric Systems: Principles and Applications, Hanser: Munich, 1997.
   Google Scholar
• Yong, T.L.; Park O.O. Phase morphology and rheological behavior of polymer/layered silicate nanocomposites. Rheol Acta. 2002, 40, 220–232.
   Web of Science ®Google Scholar
• Wagener, R.; Reisinger, T.J.G. A rheological method to compare the degree of exfoliation of nanocomposites. Polym. 2003, 44, 7513–7518.
   Web of Science ®Google Scholar
• Krishnamoorti, R.; Giannelis, E.P. Strain hardening in model polymer brushes under shear. Langmuir. 2001, 17, 1448–1452.
   Web of Science ®Google Scholar
• Mishra, J.K.; Hwang, J.K.; Ha, C.S. Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO)/organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer. Polym. 2005, 46, 1995–2002.
   Web of Science ®Google Scholar
• Khosrokhavar, R.; Naderi, G.; Bakhshandeh, G.R.; Ghoreishy, M.H.R. Effect of processing parameters on PP/EPDM/organoclay nanocomposites using Taguchi analysis method. Iranial Polym. J. 2011, 20 (1), 41–53.
   Web of Science ®Google Scholar