Influence of Filler Precoating and Printing Parameter on Mechanical Properties of 3D Printed Acrylonitrile Butadiene Styrene/Zinc Oxide Composite

References

• Mohan, N.; Senthil, P.; Vinodh, S.; Jayanth, N.A Review on Composite Materials and Process Parameters Optimisation for the Fused Deposition Modelling Process. Virtual Phys Prototyp. 2017, 12, 47–59. DOI: 10.1080/17452759.2016.1274490
   Web of Science ®Google Scholar
• Dul, S.; Fambri, L.; Pegoretti, A.Fused Deposition Modelling with ABS–Graphene Nanocomposites. Compos. Part A. 2016, 85, 181–191. DOI: 10.1016/j.compositesa.2016.03.013
   Web of Science ®Google Scholar
• Weng, Z.; Wang, J.; Senthil, T.; Wu, L.Mechanical and Thermal Properties of ABS/montmorillonite Nanocomposites for Fused Deposition Modeling 3D Printing. Mater. Des. 2016, 102, 276–283. DOI: 10.1016/j.matdes.2016.04.045
   Web of Science ®Google Scholar
• Gao, W.; Zhang, Y.; Ramanujan, D.; Ramani, K.; Chen, Y.; Williams, C. B.; Wang, C. C.; Shin, Y. C.; Zhang, S.; Zavattieri, P. D.The Status, Challenges, and Future of Additive Manufacturing in Engineering Comput. Aided Des. 2015, 69, 65–89. DOI: 10.1016/j.cad.2015.04.001
   Web of Science ®Google Scholar
• Farahani, R. D.; Dubé, M.; Therriault, D.Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications. Adv. Mater. 2016, 28, 5794–5821. DOI: 10.1002/adma.201506215
   PubMed Web of Science ®Google Scholar
• Christ, S.; Schnabel, M.; Vorndran, E.; Groll, J.; Gbureck, U.Fiber Reinforcement during 3D Printing. Mater. Lett. 2015, 139, 165–168. DOI: 10.1016/j.matlet.2014.10.065
   Web of Science ®Google Scholar
• Wu, W.; Geng, P.; Li, G.; Zhao, D.; Zhang, H.; Zhao, J.Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3d-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS. Materials. 2015,8, 5834–5846.DOI: 10.3390/ma8095271
   PubMed Web of Science ®Google Scholar
• Ning, F.; Cong, W.; Hu, Z.; Huang, K. Additive Manufacturing of Thermoplastic Matrix Composites Using Fused Deposition Modeling : A Comparison of Two Reinforcements. J. Compos. Mater. 2017, 51, 0021998317692659.
   Web of Science ®Google Scholar
• Harishanand, K. S.; Nagabhushana, H.; Nagabhushana, B. M.Comparitive Study on Mechanical Properties of ZnO, ZrO2 and CeO2 Nanometal Oxides Reinforced Epoxy Composites. Adv. Polym. Sci. Technol. An Int. J. 2013, 3, 7–13.
   Google Scholar
• Sudeepan, J.; Barman, T. K.; Sahoo, P.Study of Mechanical and Tribological Properties of ABS/ZnO Polymer Composites. Adv. Mater. Manuf. Charact. 2015, 5, 1–11.
   Google Scholar
• Zhang, L.; Wang, Y.; Wang, Y.; Sui, Y.; Yu, D.Morphology and Mechanical Properties of Clay/Styrene‐Butadiene Rubber Nanocomposites. J. Appl. Polym. Sci. 2000, 78, 1873–1878. DOI: 10.1002/(ISSN)1097-4628
   Web of Science ®Google Scholar
• Fu, S. Y.; Feng, X. Q.; Lauke, B.; Mai, Y. W.Effects of Particle Size, Particle/Matrix Interface Adhesion and Particle Loading on Mechanical Properties of Particulate–Polymer Composites. Compos. Part B. 2008, 39, 933–961. DOI: 10.1016/j.compositesb.2008.01.002
   Web of Science ®Google Scholar
• Liang, J. Z.; Li, R. K. Y.Effect of Filler Content and Surface Treatment on the Tensile Properties of Glass‐Bead‐Filled Polypropylene Composites. Polym. Int. 2000, 49, 170–174. DOI: 10.1002/(ISSN)1097-0126
   Web of Science ®Google Scholar
• Tayfun, U.; Kanbur, Y.; Abacı, U.; Güney, H. Y.; Bayramlı, E.Mechanical, Electrical, and Melt Flow Properties of Polyurethane Elastomer/Surface-Modified Carbon Nanotube Composites. J. Compos. Mater. 2017, 51, 1987–1996. DOI: 10.1177/0021998316666158
   Web of Science ®Google Scholar
• ASTM D638–10.2010. Standard Test Method for Tensile Properties of Plastics. ASTM International, West Conshohocken, PA, USA.
   Google Scholar
• ASTM D384–17.2017. Standard Test Method for Microindentation Hardness of Materials. ASTM International, West Conshohocken, PA, USA.
   Google Scholar
• Aruniit, A.; Kers, J.; Tall, K.Influence of Filler Proportion on Mechanical and Physical Properties of Particulate Composite. Agron. Res. Biosyst. Eng. Spec. 2011, 1, 23–29.
   Google Scholar
• Han, C.; Li, Z.; Dou, S.Recent Progress in Thermoelectric Materials. Chinese Sci. Bull. 2014, 59, 2073–2091.DOI: 10.1007/s11434-014-0237-2
   Google Scholar
• Ozsoy, İ.; Demirkol, A.; Mimaroglu, A.; Unal, H.; Demir, Z.The Influence of Micro-And Nano-Filler Content on the Mechanical Properties of Epoxy Composites. J. Mech. Eng. 2015, 61, 601–609. DOI: 10.5545/sv-jme.2015.2632
   Web of Science ®Google Scholar
• Yu, Z.; Wang, X.; Wu, D. Mechanical Properties, Impact Fracture Behavior, and Morphology of Long-Polyimide-Fiber-Reinforced Poly (Butylene Terephthalate) Composites. J. Compos. Mater. 2017, 51, 0021998316687031.
   Web of Science ®Google Scholar
• Fernandez-Vicente, M.; Calle, W.; Ferrandiz, S.; Conejero, A.Effect of Infill Parameters on Tensile Mechanical Behavior in Desktop 3D Printing. 3D Print. Addit. Manuf. 2016, 3, 183–192. DOI: 10.1089/3dp.2015.0036
   Google Scholar
• Hernandez, D. D.;.Factors Affecting Dimensional Precision of Consumer 3D Printing. Int. J. Aviat. Aeronaut. Aerosp. 2015, 2, 2.
   Google Scholar
• Chang, B. P.; Akil, H. M.; Nasir, R. M.; Nurdijati, S.Mechanical and Antibacterial Properties of Treated and Untreated Zinc Oxide Filled UHMWPE Composites. J. Thermoplast. Compos. Mater. 2011, 24, 653–667. DOI: 10.1177/0892705711399848
   Web of Science ®Google Scholar
• Deshmukh, S. P.; Rao, A. C.; Gaval, V. R.; Mahanwar, P. A.Mica-Filled PVC Composites: Effect of Particle Size, Filler Concentration, and Surface Treatment of the Filler, on Mechanical and Electrical Properties of the Composites. J. Thermoplast. Compos. Mater. 2011, 24, 583–599. DOI: 10.1177/0892705710393114
   Web of Science ®Google Scholar
• Kaynak, C.; Ozkaraca, A. C.Use of Zinc Borate as the Third Component of a Traditional Brominated Flame Retardant System in Acrylonitrile Butadiene Styrene. Fire Mater. 2013, 37, 491–502. DOI: 10.1002/fam.v37.7
   Web of Science ®Google Scholar
• Kumar, V.; RamKumar, J.; Aravindan, S.; Malhotra, S. K.; Vijai, K.; Shukla, M.Fabrication and Characterization of ABS Nano Composite Reinforced by Nano Sized Alumina Particulates. Int. J. Plast. Technol. 2009, 13, 133–149. DOI: 10.1007/s12588-009-0011-5
   Google Scholar
• Asyadi, F.; Jawaid, M.; Hassan, A.; Wahit, M. U.Mechanical Properties of Mica-Filled Polycarbonate/Poly (Acrylonitrile-Butadiene-Styrene) Composites. Polym. Plast. Technol. Eng. 2013, 52, 727–736. DOI: 10.1080/03602559.2012.762672
   Web of Science ®Google Scholar
• Moscato, S.; Bahr, R.; Le, T.; Pasian, M.; Bozzi, M.; Perregrini, L.; Tentzeris, M. M.Infill-Dependent 3-D-Printed Material Based on NinjaFlex Filament for Antenna Applications. Antennas Wirel. Propag. Lett. 2016, 15, 1506–1509. DOI: 10.1109/LAWP.2016.2516101
   Web of Science ®Google Scholar
• Manoharan, S.; Suresha, B.; Ramadoss, G.; Bharath, B. Effect of Short Fiber Reinforcement on Mechanical Properties of Hybrid Phenolic Composites. J. Mater. 2014. DOI: 10.1155/2014/478549
   PubMed Web of Science ®Google Scholar