Studies on Castable Refractories Using High Purity Calcium Aluminate Cements

References

• ”Report on Trends in Natural Resources”, Received from the High Commission of India (Science Dept), London (1969).
   Google Scholar
• Personal communication.
   Google Scholar
• Bliss, L. G., “The silver side of lithium”, Foote Prints, 18 (2), 3–12 (1947).
   Google Scholar
• Clark, J. D. and Donahay, J. W., “Lithium in modern ceramics”, Foote Prints, 22 (2), 24–37 (1950).
   Google Scholar
• (a) Verdieck, R. G., “A foote note on lithium clay dispersion”, Foote Prints, 21 (1), 17–19 (1950).
   Google Scholar
• Anon, “Lithium in clay dispersions”, Foote Prints, 22 (2), 22 (1950).
   Google Scholar
• Rassner, D. D., “Lithium salts as flocculant”, Foote Prints, 23 (1), 7 (1951).
   Google Scholar
• Lyon, K. C., Pincus, A. G., Navias, L. and Simpson, H. E., “Lithium in glass and enamels”, Foote Prints, 22 (2), 9–21 (1950).
   Google Scholar
• (a) Parmelee, C. W. and Rodriguez, A. R., “Cata lytic mullitization of kaolinite by metallic oxide”, Jour. Amer. Ceram. Soc., 25 (1), 1–10 (1942).
   Google Scholar
• Betz, G. C., “Lithium minerals and compounds in ceramics”, Jour. Amer. Ceram. Soc., 21 (5), 189–91 (1938).
   Google Scholar
• Thorngate, B. W., “Development of ceramic composition suitable for the production of porcelain type artware”, Bull No. 11, College of Engg., Univ. of Florida, September (1946).
   Google Scholar
• Budnikov, P. P., “Effect of mineralisers on the mechanical, thermal and dielectric properties of porcelain”, Steklo i Keram, 11 (1), 4–7 (1954).
   Google Scholar
• Cook, H. K., “The reaction of alkalies in cement with certain constituents of mineral aggregates”, Proc. International symposium on Reactivity of Solids, Gothenburg; Part 2, pp. 653–63 (1954).
   Google Scholar
• Gaskell, J. A., Granshaw, R. W. and Roberts, A. L., “Studies of the clay-quartz system, VII—The effect of alkali additions on the crystalline phases of silica at high temperatures”, 47th Report of the Joint Refractories Committee, 1955-56, Gas Council Research Communication No. GC 30, pp 8–19.
   Google Scholar
• Houston, M. D., “Influence of lithia upon the recrystallisation of titania”, Amer. Ceram. Soc. Bull., 36, 139–141 (1957).
   Google Scholar
• Moore, H. and Prasad M. R., “The effects of various mineralising agents in promoting re-crystallisation in mixture of clay and alumina during firing”, Jour, Soc. Glass TechnoL, 39, 341–50T (1955).
   Google Scholar
• Nazarenko, M. F. and Sviridenko, V. A., “Mineralising effect of some additions on the mullitization process”, Vestnik Akad. Nauk Kazakh S.S.R., 10, 85–98 (1953).
   Google Scholar
• Towells, R., “The effect of lepidolite in a high tension electrical porcelain body”, Jour. Amer. Ceram. Soc., 11 (8), 644–48 (1928).
   Google Scholar
• Cowan, C. A., Bole, A. G. and Stone, R. L., “Spodumene as a flux component in sanitary chinaware bodies”, Jour. Amer. Ceram. Soc., 33 (6), 193–97 (1950).
   Web of Science ®Google Scholar
• Donahay, J. W. and Clark, J. D., “Lepidolite, a neglected cost cutting flux”, Ceram. Ind., 53 (11), 74–76, 94 (1949).
   Google Scholar
• Hammer, R. and Tuttle, M. A., “Spodumene, tremolite talc and nepheline syenite in a multifluxed vitreous china body”, Foot e Prints, 23 (1), 6 (1951).
   Google Scholar
• Boyd, J. E. (Jr), “Pyrometric properties of spodumene-felspar mixtures”, Jour Amer. Ceram. Soc., 21 (11), 358–88 (1938).
   Google Scholar
• Schurecht, H. G., Shapiro, J. K. and Zabawsky, Z., “Influence of fluxes of spodumene and felspar mixtures on the properties of chinaware bodies”, Jour. Amer. Ceram. Soc., 25 (11), 321–26 (1942).
   Google Scholar
• Lampman, C. M., “Lepidolite as a flux in whiteware bodies”, Ceram. Ind., 33 (6), 40 (1939).
   Google Scholar
• Vanderbilt, R. T. Co., “Low temperature vitreous artware”. Private Investigation (unpublished).
   Google Scholar
• Koenig, C. J., “Cone 04 vitreous bodies with nepheline syenite and lepidolite”, Foote Prints, 22 (1), 20–23 (1950).
   Google Scholar
• Harvey, K. E., A boron, lead, lithium ceramic composition, US Patent No. 2,426,395.
   Google Scholar
• Currier, A. E., “A general investigation of the use of fluxes in a semi-vitreous dinnerware body”, Thesis, PhD.
   Google Scholar
• Andrews, Ray, Ceramic Flux, US Patent No. 2, 482, 533, Sept. 20 (1949).
   Google Scholar
• Avetikov, V. G., “The use of lithium compounds in the ceramic industries”, Steklo i Keram., 14 (12), 10–13, (1957).
   Google Scholar
• Anon, “Lithium compounds”, Ceram. Ind., 32 (2), 57–59 (1939).
   Google Scholar
• Anon, “Eutectic studies in lithium compounds”, Ceram. Ind., 47 (2), 52–55 (1946).
   Google Scholar
• Clark, J.D., “Lepidolite—its occurrences and uses”,. Foote Prints, 18 (1), 8–13 (1946).
   Google Scholar
• Anon, “Continued expansion expected for lithium industry”, Engg. Mining Jour. 146 (6), 81 (1945).
   Google Scholar
• Hader, Rodney N., Nielson, Richard L. and Herre, Myrum G., “Lithium and its compounds”, Ind. Engg. Chem., 43 (12), 2636–46 (1951).
   Web of Science ®Google Scholar
• Koenig, C. J., “Nepheline syenite in low temperature vitreous wares”, Ohio State Univ. Engr. Expt. Sta. Bull., No. 112, 35–36, July (1942).
   Google Scholar
• Kreidl, N. J., “The fluxing properties of lithia”, Foote Prints, 14 (1), 1–11 (1941).
   Google Scholar
• Charrin, V., ‘Lithium in ceramics’, Ceram. Verrere Email, 2 (7), 305–306 (1934).
   Google Scholar
• Mazilianskas, S., “Frits for ceramic bonds”, Ceramic Age. 71, 40–44 (1958).
   Google Scholar
• Mehmel, M. “The importance of lithium in ceramics and glazes”, Sprechsaal, 90 (4), 90–1; (5), 111–15 (1957).
   Google Scholar
• Preston, E., “Lithium glass and ceramics”, Foote Prints, 11 (1), 1–15 (1938).
   Google Scholar
• Orlowski, H. J. and Koenig, C. J., “Thermal expansion of silicate fluxes, Jour. Amer. Ceram. Soc., 24 (3), 83 (1941).
   Google Scholar
• Roy, R., Roy, D. M. and Osborn, E. F., “Compositional and stability relationships among the lithium alumino silicates: eucryptite, spodumene and petalite”, Jour. Amer. Ceram. Soc., 33 (5), 152–59 (1950).
   Web of Science ®Google Scholar
• Roy, R., “Phase equilibria in the system lithia- alumina-silica”, Doc. Thesis, College of Ceramics, Univ. of Penn.
   Google Scholar
• Roy, R. and Osborn, E. F., “The system: lithium metasilicate-spodumene-silica”, Jour. Amer. Ceram. Soc., 71 (6), 2086–95 (1949).
   Web of Science ®Google Scholar
• Simpson, H. E., “Lithium development and expansion”, Glass Ind., 36, 17–22, 46–47 (1955).
   Google Scholar
• Austin, C. R. and Brooks, S. T., “Study of eutectic fluxes in semivitreous and vitreous whiteware bodies”, Jour. Amer. Ceram. Soc., 24 (5), 155–59 (1941).
   Google Scholar
• Anon, “How to get low maturing bodies”, Ceram. Ind., 54 (3), 77 (1950).
   Google Scholar
• Thiess, L. E., “Vitrified cordierite bodies”, Jour. Amer. Ceram. Soc., 26 (3), 99–102 (1943).
   Google Scholar
• Smoke, E. J., “Thermal expansion properties of some high silica bodies in the system lithia-aluminasilica”, Ceramic Age, 64 (6), 11–15 (1954).
   Google Scholar
• Commons, C. M. (Jr) and Romano, P. T., “Laboratory development of dunt resisting bodies containing 10% petalite”, Bull. Amer. Ceram. Soc., 37 (8), 353–56 (1958).
   Google Scholar
• Hummel, H. A., “Thermal expansion properties of natural lithia minerals”, Foote Prints, 20 (2), 3–11 (1948).
   Google Scholar
• Hummel, H. A., “Thermal expansion properties of some synthetic lithia minerals”, Jour. Amer. Ceram. Soc., 34 (8), 235–39 (1951).
   Web of Science ®Google Scholar
• Smoke, E. J., “Ceramic compositions having negative linear thermal expansion, Part I”, Jour. Amer. Ceram. Soc., 34 (3), 87–90 (1951); Foote Prints, 23 (1), 4 (1951).
   Google Scholar
• Smoke, E. J., “Ceramic compositions having negative linear thermal expansion, Part II”, Ceramic Age, 62, 13–19 (1953).
   Google Scholar
• White, R. P. and Rigby, G. R., “The thermal expansion properties of compositions containing lithia, alumina and silica”, Trans. Brit. Ceram. Soc., 53, 324–34 (1954).
   Google Scholar
• Barlett, H. B., and Thomas, R. R., “Study of the mineralogical and physical characteristics of two lithia-zirconia bodies”, Jour. Amer. Ceram. Soc., 17 (2), 17 (1934).
   Google Scholar
• Beiler, G., “Lithium compounds in ceramics”, Silicates Ind., 17, 297–99 (1952).
   Google Scholar
• (a) Clark, J. D., “Petalite—a new commercial material”, Mining Eng., 187, 1068–70 (1950).
   Google Scholar
• Clark, J. D., “Petalite—its market development and uses”, Jour. Canad. Ceram. Soc., 27, 1–6 (1958).
   Google Scholar
• Clark, J. D. and Longenecker, R. J., “Petalite—a unique raw material with widespread use in glass, porcelain enamel, frits and whiteware”, Ceram. Ind., 66, 129–31 (1956).
   Google Scholar
• Donahay, J. W., “Petalite”, Foote Prints, 26 (2), 11–25 (1954).
   Google Scholar
• Singer, F. and Singer, S. S., “Ceramic Bodies with small coefficients of expansion”, Sprechsaal, 89, 399–403, 430–5 (1956).
   Google Scholar
• Smoke, Edward J. and Koenig, J. H., “Thermal shock behaviour of ceramic dielectrics”, Ceramic Age, 57 (2), 17–19 (1951).
   Google Scholar
• Improved Ceramics, Signal Corps Contract No. DA 36–039-SC-42577 (Dec, 1952 to Dec, 1954) and DA-36–039-Sc-64566 (Dec 1, 1954 to Sept 1, 1958). Ceramic Research Station, Rutgers University, New Jersy.
   Google Scholar
• Toshio, Maki and Megumi Tashiro, “Thermal shock resistant ceramics of the Li2O-Al2O3-SiO2 system, VI-Reaction between petalite crystals and glass”, Chem. Abstr., 69, 79790 (1968).
   Google Scholar
• Stark, R. E. and Delks, B. H. (Jr), “New lithium ceramics”, Materials and Methods, 35 (1), 98–99 (1952).
   Google Scholar
• Sueki, B. (Asahi Glass Co), Porcelain with zero thermal expansion, Jap. Pat. No. 8,034, Dec. 7 (1954).
   Google Scholar
• Tumanov, S. G. and Shvaiko, V. P., “Lithium porcelain”, Steklo i Keram., 13, 11–16 (1956).
   Google Scholar
• Hummel, F. A., “Ceramics for thermal shock resistance”, Ceram. Ind., 65 (5), 73–75, 104 (1955).
   Google Scholar
• Eichbaum, B. R. and Smoke, E. J., “Dense ceramic bodies of low firing shrinkage”, Ceramic Age, 22–27, January (1957).
   Google Scholar
• Bezborodov, M. A. and Mikhalerich, P. F., “Spodumene porcelain, “Steklo i Keram., 11 (7), 5–9 (1954).
   Google Scholar
• Anon, “Stupalith, new ceramic contracts when heated”, Ceram. Ind., 54, 71 (1950).
   Google Scholar
• Anon, “Lithium containing thermal shock resistant ceramic materials”, Vetro e Silicati, 3 (14), 39–41 (1959).
   Google Scholar
• Lithium containing porcelain, German Patent No. 1,010,000, June 6, 1957, Ceram. Abstr., 54, 8023d (1960).
   Google Scholar
• Mccormick, “Lithia substitution in MgO-Al2O3-SiO2 ceramic bodies utilizing electric arc-resistant furnace products”, Foote Prints, 23, 5 (1951).
   Google Scholar
• Fishwick, J. H., “Manufacture of foamed ceramics based on petalite and ß-spodumene”, Bull. Amer. Ceram. Soc., 42 (3), 110–13 (1963).
   Google Scholar
• Van der beck, R. R., “A spodumene-based castable refractory”, Bull. Amer. Ceram. Soc., 42 (8), 448–49 (1963).
   Google Scholar
• Fishwick, J. H., Van der beck, R. R. and Talby R. W., “Low thermal expansion compositions in the system, spodumene-kaolin and petalite-kaolin”, Bull. Amer. Ceram. Soc., 43 (11), 832–835 (1964).
   Google Scholar
• Smith, G. P. and Strong, G. E., “Corrugated or cellular bodied ceramic materials”, Fr. Pat. No. 1,355,857, March 20 (1964); US Patent Application, March 23 (1962); Chem. Abstr., 62, 5046e (1965).
   Google Scholar
• Corning Glass Works, “Ceramic cements for ceramic bodies having low thermal expansion”, Brit. Pat. 982, 489, Feb. 3 (1965); US Appl. Jan. 8 (1962); Chem. Abstr., 62, 10202e (1965).
   Google Scholar
• Ikeda Koichi and Katugi Minagawa, “Process for making ceramics of low thermal expansion”, Fr. Pat. 1,402,672, June 11 (1965); Japan Appl. Aug. 27 (1963); Chem. Abstr., 65, 3534c (1966).
   Google Scholar
• Moldval, A. S. and Bubik, I., “Manufacture of ceramic bodies with a negative coefficient of linear thermal expansion”, Epitoanyag, 18 (5), 165–66, 174 (1966) (Hung), Chem. Abstr., 65, 19810f (1966).
   Google Scholar
• Zin'ko, E. I., Medvedovskaya, E. I. and Fomina, N. P., Synthetic aluminosilicate of lithium—the matrix for ceramic materials, Chem. Abstr., 65, 10178b (1966).
   Google Scholar
• Hinz, Wilhelm and Kunth peter O., “Glass sealant for ceramics”, German (East) Patent No. 48,342, June 5 (1966), Chem. Abstr. 65, 10178b (1966).
   Google Scholar
• Norwalk, Marshal H., “Molded ceramic articles”, US Patent 3379543, 23 April (1968); Chem. Abstr. 69, 4943g (1968).
   Google Scholar
• Gonzalez, Pena and Julia, M., “Ceramic materials of low expansion coefficients based on lithium aluminium silicate”, Chem. Abstr., 70, 22545d (1969).
   Google Scholar
• Grum-grzhimailo, O. S. and Kroll, E. B., “Oriented mullite in ceramic mixtures containing lepidolite”, Steklo i Keram., 25 (11), 44–5 (1968); Chem. Abstr., 70, 50100y (1969).
   Google Scholar
• Fishwick, J. H., “Lightweight ceramic product”, US Patent No. 3,413,132, 26 Nov. (1968); Chem. Abstr., 70, 40417t (1969).
   Google Scholar
• Carborundum Co., “Binder agent for abrasive bodies containing alumina”, German Patent No. 960,435, March 21 (1957); Chem. Abstr., 53, 12623e (1959).
   Google Scholar
• Atlas, L. M. “Effect of some lithium compounds in sintering of MgO”, Jour. Amer. Ceram. Soc., 40 (6), 196–99 (1957).
   Web of Science ®Google Scholar
• Weitz, R. S., “Ferromagnetic spinels using lithium”, Ceram. Ind., 58 (4), 130–34; (5), 76–79 (1952).
   Google Scholar