Sintering and Hardness Characterization of Nanozirconia Tapes

References

• F. Snizken, A. De Wilde, S. Mulleus and J. Luyten, “Aqueous Tape Casting of Yttria Stabilized Zirconia Using Natural Product Binder,” J. Euro. Ceram. Soc., 24, 1107–10 (2004).
   Web of Science ®Google Scholar
• Z. Xie, J. Ma, Q. Xu, Y. Huang and Y. B. Cheng, “Effect of Dispersant and Soluble Counter-Ions on Aqueous Dispersibility of Nano-Sized Zirconia Powder,” Ceram. Int., 30, 219–24 (2004).
   Web of Science ®Google Scholar
• S. P. Jiang, J. P. Jhang and K. Foger, “Chemical Interactions between 3 mol% Yttria-Zirconia and Sr-Doped Lanthanum Manganite,” J. Euro. Ceram. Soc., 23, 1865–73 (2003).
   Web of Science ®Google Scholar
• J. V. Herle and R. Vasquez, “Conductivity of Mn and Ni-Doped Stabilized Zirconia Electrolyte,” J. Euro. Ceram. Soc., 24, 1177–80 (2004).
   Web of Science ®Google Scholar
• A. K. Maiti and B. Rajender: “Terpineol as a Dispersant for Tape Casting Yttria Stabilized Zirconia Powder,” Mater. Sci. Engg. A, 333, 35–40 (2002).
   Web of Science ®Google Scholar
• T. Fengqiu, H. Xiaoxian, Z. Yufeng and G. Jingkun, “Effects of Dispersants on Surface Chemical Properties of Nano-Zirconia Suspensions,” Ceram. Int., 26, 93–97 (2000).
   Web of Science ®Google Scholar
• J. Sun, L. Gao and J. Guo, “Influence of the Initial ρH on the Adsorption Behaviour of Dispersant on Nano Zirconia Powder,” J. Euro. Ceram. Soc., 19, 1725–30 (1999).
   Web of Science ®Google Scholar
• Q. Tan, Z. Zhang, Z. Tang, S. Luo and K. Feng, “Influence of Polyelectrolyte Dispersant on Slip Preparation of Nano-Sized Tetragonal Polycrystals Zirconia for Aqueous-Gel-Tape-Casting Process,” Mater. Chem. Phys., 80, 615–19 (2003).
   Web of Science ®Google Scholar
• D. S. Yan, H. B. Qiu, Y. S. Zheng and L. Guo, “Bulk Nanostructured Oxide Materials and the Superplastic Behavior Under Tensile Fatigue at Ambient Environment,” Nanostruc. Mater., 9, 441–50 (1997).
   Web of Science ®Google Scholar
• T. P. Raming, A. J. A. Winnubst, W. I. V. Zyl and H. Verweij, “Densificaron of Zirconia-Hematite Nano Powders,” J. Euro. Ceram. Soc., 23, 1053–60 (2003).
   Web of Science ®Google Scholar
• O. Vasylkiv, Y. Sakka, Y. Maeda and V. V. Skorokhod, “Nano-Engineering of Zirconia-Noble Metals Composites,” J. Euro. Ceram. Soc., 24, 469–73 (2004).
   Web of Science ®Google Scholar
• Y. Zeng, S. W. Lee, L. Gao and C. X. Ding, “Atmospheric Plasma Sprayed Coatings of Nanostructured Zirconia,” J. Euro. Ceram. Soc., 22, 347–51 (2002).
   Web of Science ®Google Scholar
• H. Chen, X. Zhou and C. Ding, “Investigation of the Thermomechanical Properties of a Plasma Sprayed Nano Structured Zirconia Coating,” J. Euro. Ceram. Soc., 23, 1449–55 (2003).
   Web of Science ®Google Scholar
• P. Kanellopoulos and C. Gill, “Hydrothermal Ageing of Yttria-Stabilized Zirconia, Sintered at 1300°C-1325°C: The Effects of Copper Oxide Doping and Sintering Time Variations,” J. Mater. Sci., 37, 5075–82 (2002).
   Web of Science ®Google Scholar
• D. R. R. Lazar, C. A. B. Menezes, F. U. V. Ussui, N. B. Lima, A. H. A. Bressiani and J. O. A. Paschoal, “Evaluation of Hardness and Fracture Toughness of TZP Ceramics Stabilized with Yttria Concentrates,” Mater. Sci. Forum, 416-418, 555–60 (2003).
   Google Scholar
• M. Matsuzawa, M. Abe, S. Horibe and J. Sakai, “The Effect of Reduction on the Mechanical Properties of CeO2 Doped Tetragonal Zirconia Ceramics,” Acta Mater., 52, 1675–82 (2004).
   Web of Science ®Google Scholar
• O. Vasylkiv, Y. Sakka and V. V. Skorokhod, “Low-Temperature Processing and Mechanical Properties of Zirconia and Zirconia-Alumina Nano Ceramics,” J. Am. Ceram. Soc., 86, 299–304 (2003).
   Web of Science ®Google Scholar
• T. Xu, J. Vlengels, O. Vanderbiest and P. Wang, “Mechanical Properties of Nd2O3/Y2O3-Coated Zirconia Ceramics,” Mater. Sci. Engg. A, 374, 239–43 (2004).
   Web of Science ®Google Scholar
• J. D. Lin and J. G. Duh, “Fracture Toughness and Hardness of Ceria- and Yttria-Doped Tetragonal Zirconia Ceramics,” Mater. Chem. Phys., 78, 253–61 (2002).
   Web of Science ®Google Scholar
• A. Selcuk and A. Atkinson, “Strength and Toughness of Tape-Cast Yttria-Stabilized Zirconia,” J. Am. Ceram. Soc., 83, 2029–35 (2000).
   Web of Science ®Google Scholar
• A. Guha, S. Ghosh and A. K. Mukhopadhyay, “A Process for the Manufacture of High Strength Nano Zirconia Tapes for Structural Application,” Indian Patent Application, submitted on June 19, 2004.
   Google Scholar
• S. T. Aruna and K. S. Rajam, “Mixture of Fuels Approach for the Solution Combustion Synthesis of Al2O3-ZrO2 Nanocomposite,” Mater. Res. Bull., 39, 157–67 (2004).
   Web of Science ®Google Scholar
• J. Li, Z. Tang, Z. Zhang and S. Luo, “Study of Factors Influencing the Microstructure and Phase Content of Ultrafine YTZP,” Mater. Sci. Engg. B, 99, 321–24 (2003).
   Web of Science ®Google Scholar
• J. Gong, J. Wu and Z. Guan, “Examination of the Indentation Size Effect in Low-Load Vickers Hardness Testing of Ceramics,” J. Euro. Ceram. Soc., 19, 2625–31 (1999).
   Web of Science ®Google Scholar
• D. B. Marshall and B. R. Lawn, p. 26 in: Microindentation Techniques in Materials Science and Engineering, ASTM, Philadelphia, PA (1986).
   Google Scholar
• H. Li, Y. H. Han and R. C. Bradt, “Knoop Microhardness of Single Crystal Sulphur,” J. Mater. Sci., 29, 5641–45 (1994).
   Web of Science ®Google Scholar
• A. Krell, “A New Look at Grain Size and Load Effects in the Hardness of Ceramics,” Mater. Sci. Engg. A, 245, 277–84 (1998).
   Web of Science ®Google Scholar
• J. Gong, H. Miao and B. Hu, “Compositional Dependence of Hardness of (Ce, Y)-TZP/AI2O3 Composites,” Mater. Sci. Engg. A, 372, 207–12 (2004).
   Web of Science ®Google Scholar