References
- M. Vallet-Regí and J. M. González-Calbet, Prog. Solid State Chem., 32, 1–31 (2004). doi: https://doi.org/10.1016/j.progsolidstchem.2004.07.001
- A. K. Mishra, J. A. Davidson, R. A. Poggie, P. Kovacs and T. J. Fitzgerald, “Mechanical and Tribological Properties and Biocompatibility of Diffusion Hardened Ti-13Nb-13Zr – A New Titanium Alloy for Surgical Implants,” pp. 96-116 in: Medical Applications of Titanium and its Alloys, Eds. S. A. Brown and J. E. Lemons, ASTM STP, West Conshohocken, USA (1996).
- P. Majumdar, S. B. Singh and M. Chakraborty, Wear, 264, 1015–1025 (2008). doi: https://doi.org/10.1016/j.wear.2007.08.005
- P. Kovacs and J. A. Davidson, “The Electrochemical Behavior of a New Titanium Alloy with Superior Biocompatibility”, pp. 2705-2712 in: Titanium ‘92 Science and Technology, Eds. F. H. Froes and I. Caplan, The Minerals, Metals & Materials Society, Pittsburgh, USA (1993).
- J. A. Davidson, A. K. Mishra, P. Kovacs and R. A. Poggie, Biomed. Mater. Eng., 4, 231–243 (1994).
- M. A. Khan, R. L. Williams and D. F. Williams, Biomaterials, 17, 2117–2126 (1996). doi: https://doi.org/10.1016/0142-9612(96)00029-4
- S. Sathish, M. Geetha, N. D. Pandey, C. Richard and R. Asokamani, Mater. Sci. Eng. C, 30, 376–382 (2010). doi: https://doi.org/10.1016/j.msec.2009.12.004
- L. Thair, U. K. Mudali, N. Bhuvaneswaran, K. G. M. Nair, R. Asokamani and B. Raj, Corros. Sci., 44, 2439–2457 (2002). doi: https://doi.org/10.1016/S0010-938X(02)00034-3
- S. Sathish, M. Geetha, S. T. Aruna, N. Balaji, K. S. Rajam and R. Asokamani, Wear, 271, 934–941 (2011). doi: https://doi.org/10.1016/j.wear.2011.03.023
- P. S. Rathore, S. Gulati, D. Li, G. Manivasagam, S. T. Aruna, S. V. Joshi and J. A. Szpunar, “Comparative Studies on Tribocorrosion Behaviour of Plasma-Sprayed and Detonation Gun Coatings of Al2O3-13%TiO2 on Biomedical Alloy Ti-13Nb- 13Zr and Gun Metal”, pp. 88-104 in: Tribo-Corrosion: Research, Testing, and Applications (STP 1563), Eds. P. Blau, J. Celis, D. Drees and F. Franek, ASTM Int, West Conshohocken, PA, USA (2013).
- A. Pal, A. K. Metya, A. R. Chowdhury and A. Sinha, Trans. Indian Ceram. Soc., 79, 175–181 (2020). doi: https://doi.org/10.1080/0371750X.2020.1792806
- D. Jugowiec, A. Lukaszczyk, L. Cieniek, M. Kot, K. Reczynska, K. Cholewa-Kowalska, E. Pamula and T. Moskalewicz, Surf. Coat. Technol., 319, 33–46 (2017). doi: https://doi.org/10.1016/j.surfcoat.2017.03.067
- T. Moskalewicz, A. Zych, A. Lukaszczyk, K. Cholewa-Kowalska, A. Kruk, B. Dubiel, A. Radziszewska, K. Berent and M. Gajewska, Metall. Mater. Trans. A, 48, 2660–2673 (2017). doi: https://doi.org/10.1007/s11661-017-4030-0
- W. Tian, Y. Guo, X. Li, B. Tang and A. Fan, J. Wuhan Univ. Technol. Mater. Sci. Ed., 32, 951–957 (2017). doi: https://doi.org/10.1007/s11595-017-1695-6
- L. Mohan, P. D. Babu, P. Kumar and C. Anandan, Surf. Interf. Anal., 45, 1785–1791 (2013). doi: https://doi.org/10.1002/sia.5323
- P. Kumar, P. D. Babu, L. Mohan, C. Anandan and V. K. W. Grips, J. Mater. Eng. Perform., 22, 283–293 (2013). doi: https://doi.org/10.1007/s11665-012-0230-3
- E. T. Uzumaki, C. S. Lambert and C. A. C. Zavaglia, Key Eng. Mater., 254-256, 435–438 (2004). doi: https://doi.org/10.4028/www.scientific.net/KEM.254-256.435
- A. Vadiraj and M. Kamaraj, Surf. Coat. Technol., 200, 4538–4542 (2006). doi: https://doi.org/10.1016/j.surfcoat.2005.03.036
- L. Wang, Y. Di, H. Wang, X. Li, L. Dong and T. Liu, Trans. Indian Ceram. Soc., 78, 212–218 (2019). doi: https://doi.org/10.1080/0371750X.2019.1690582
- S. Tao, Z. Yin, X. Zhou and C. Ding, Tribol. Int., 43, 69–75 (2010). doi: https://doi.org/10.1016/j.triboint.2009.04.037
- S. F. Hulbert, “The Use of Alumina and Zirconia in Surgical Implants”, pp. 25-40 in: Advanced Series in Ceramics, An Introduction to Bioceramics, Vol. 1, Eds. L. L. Hench and J. Wilson, World Scientific, New Jersey, USA (1993).
- J. Chevalier, Biomaterials, 27, 535–543 (2006). doi: https://doi.org/10.1016/j.biomaterials.2005.07.034
- J. Chevalier, S. Deville, E. Munch, R. Jullian and F. Lair, Biomaterials, 25, 5539–5545 (2004). doi: https://doi.org/10.1016/j.biomaterials.2004.01.002
- L. T. Kabacoff, The AMPITAC Newsletter, 6, 37–42 (2002).
- M. Gell, E. H. Jordan, Y. H. Sohn, D. Goberman, L. Shaw and T. D. Xiao, Surf. Coat. Technol., 146-147, 48–54 (2001). doi: https://doi.org/10.1016/S0257-8972(01)01470-0
- S. Lee, C. Morillo, L.-O. Joaquin, S. H. Kim, T. Sekino, K. Niihar and B. J. Hockey, Wear, 255, 1040–1044 (2003). doi: https://doi.org/10.1016/S0043-1648(03)00099-1
- S. Sathish, M. Geetha, S. T. Aruna, N. Balaji, K. S. Rajam and R. Asokamani, Ceram. Int., 37, 1333–1339 (2011). doi: https://doi.org/10.1016/j.ceramint.2010.12.012
- E. M. Santos, S. Vohra, S. A. Catledge, M. D. McClenny, J. Lemos and K. D. Moore, J. Arthroplasty, 19, 30–34 (2004). doi: https://doi.org/10.1016/j.arth.2004.06.017
- J. Chevalier, Biomaterials, 27, 535–543 (2006). doi: https://doi.org/10.1016/j.biomaterials.2005.07.034
- B.-Y. Chou and E. Chang, J. Mater. Sci.: Mater. Med., 13, 589–595 (2002).
- ASTM G 133- 05, Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear, ASTM International, West Conshohocken, PA, USA (2016).
- H. Ageorges and P. Ctibor, Surf. Coat. Technol., 202, 4362–4368 (2008). doi: https://doi.org/10.1016/j.surfcoat.2008.04.010
- Z. Hong, L. Fei, H. E. Bo, W. Jun and S. Bao-de, Trans. Nonferr. Met. Soc. China, 17, 389–393 (2007). doi: https://doi.org/10.1016/S1003-6326(07)60104-6
- E. H. Jordan, M. Gell, Y. H. Sohn, D. Goberman, L. Shaw, S. Jiang, M. Wang, T. D. Xiao, Y. Wang and P. Strutt, Mater. Sci. Eng. A, 301, 80–89 (2001). doi: https://doi.org/10.1016/S0921-5093(00)01382-4
- W. Zorawski, A. Goral, O. Bokuvka, L. Litynska-Dobrzynska and K. Berent, Surf. Coat. Technol., 268, 190–197 (2015). doi: https://doi.org/10.1016/j.surfcoat.2014.09.014
- R. S. Lima, A. Kucuk and C. C. Berndt, Surf. Coat. Technol., 135, 166–172 (2001). doi: https://doi.org/10.1016/S0257-8972(00)00997-X
- M. Geetha, S. Sathish, K. Chava and S. V. Joshi, Surf. Eng., 30, 229–236 (2014). doi: https://doi.org/10.1179/1743294414Y.0000000245
- R. Venkataraman and P. Krishnamurthy, J. Eur. Ceram. Soc., 26, 3075–3081 (2006). doi: https://doi.org/10.1016/j.jeurceramsoc.2005.09.054
- A. Rico, J. Rodriguez, E. Otero, P. Zeng and W. M. Rainforth, Wear, 267, 1191–1197 (2009). doi: https://doi.org/10.1016/j.wear.2009.01.022
- X. Lin, Y. Zeng, S. W. Lee and C. X. Ding, J. Eur. Ceram. Soc., 24, 627–634 (2004). doi: https://doi.org/10.1016/S0955-2219(03)00254-1
- S. Sathish and M. Geetha, Trans. Nonferr. Met. Soc. China, 26, 1336-1344 (2016). doi: https://doi.org/10.1016/S1003-6326(16)64236-X
- P. H. Suegama, C. S. Fugivara, A. V. Benedetti, J. M. Guilemany, J. Fernández and J. Delgado, Electrochim. Acta, 49, 627–634 (2004). doi: https://doi.org/10.1016/j.electacta.2003.09.017