REFERENCES
- Gordon (E I) & Heriett (D R). Pathways in devices lithography. IEEE Trans. Electron Devices, ED-22 (7), July 1975; 371–75.
- Broers (A N). A review of electron beam lithography techniques. Int. Conf. on Microlithography, Paris (21–24 June, 1977); 21–29.
- Broers (A N). IBM Thomas J. Watson Research Centre, Yorktown Heights, New York. A review of high-resolution microfabrication techniques. Inst. Phys. Conf. Serv. No. 40, 1978; 155–177.
- Parikh (Mihir). Self-consistent proximity effect correction technique for resist exposure (SPECTRE). J. Vac. Sci. Technol., 15(3), May/June, 1978; 931–33.
- Beasley (H P) & Squire (D G). An electron-beam maskmaker. IEEE Trans. Electron Devices (July 1975), ED-22(7); 376–84.
- Herriett (D R) et al. EBES LA practical electron lithographic system. Electron Devices, July 1975, ED-22(7): 385–92.
- Chang (G H P) et al. Vector-scan I: An automated electron-beam system for high resolution lithography. Proc. Symp. on Electron & Ion Beam Sci. and Tech., 7th Int. Symp, 1976; 392–410.
- Wilson (A D) et al. Automation of Vector Scan I: Electron Beam Lithographic system. Proc. Ion and Electron Beam Science and Technology Symposium, 1976; 361–376.
- Jacques Trotel. Dynamic beam shaping. J. Vac. Sci. Technol., 15(3), May/June, 1978; 872–73.
- Ahmed (H), Jone (G A C). (Cambridge). Electron Beam Lithography of large area devices without registration marks. Proc. 7th Symp. Electron and Ion Beam Tech., 1976; 366–377.
- Heynick (L N) et al. Projection electron Lithography using aperture lenses, IEEE Trans. Electron Devices, July, 1975, ED-22(7); 399–409.
- Evans (Stephen A.) et al. Fabrication of Integrated injection logic with electron-beam lithography and ion implantation. IEEE Trans, on Electron Devices, April 1978, ED-25 (4); 402–407.
- Henderson (Richard C), Reiner (Thomas) & Coppen (Peter J). The use of submicrometer electron-beam lithography for fabricating 4-k bit CCD Memory Arrays. IEEE Trans, on Electron Devices, April 1978, ED-25 (4); 408–412.
- Yau (L D) & Tsai (T N). Fabrication of low-noise beam-leaded microwave bipolar transistor by electron and photolithography. IEEE Trans, on Electron Devices, April 1978, ED-25 (4); 413–419
- Blocker (T G), Machsey (H M) & Doerbeck (F H). Electron beam fabrication of submicron gates for GaAs FETs. J. Vac. Sci. Technol., 5(3), May/June 1978; 965–968.
- Alles (D S) et al. Central system design and alignment methods for electron lithography. J. Vac. Sci. and Technol., November-December 1976, 12 (6); 1252–56.
- Ballantyne (H P). Electron beam fabrication of chromium master masks. J. Vac. Sci. and Technol. Nov.-Dec. 1976; 12(6); 1257–60.
- Blocker (T). Submicron lithography requirements for high density charge coupled and magnetic bubble devices. Scanning electron microscopy (1976); 653–658.
- Chang (G H P) et al. The probe forming and deflection system for vector scan E/B lithography system. Proc. Symp. Electron and Ion Beam Sci. and Tech., 7th Int. Symp. (1976); 377–391.
- Parks (H G) et al. BEAMOS-An electron beam digital memory device using matrix lens optics. Proc. of the Symp. on Electron & Ion Beam Sci. and Tech., 7th Int. Symp. (1976); 315–324.
- Thomson (M G R). Design differences between electron beam lithography instruments and scanning electron microscopes. Scanning Electron Microscopy (1976–1), Toronto, Canada, 5–9 April, 1976; 633–40.
- Chang (T H B) & others. Electron beam lithography draws a finer line. Electronics, 12th May, 1977, 50(10); 89–98.
- Henderson (R C). Direct wafer exposure with E-beam; alternative to conventional mask-making/photofab techniques. Circuit Mfg. (Sept. 1977), 17 (9); 58–65.