67
Views
37
CrossRef citations to date
0
Altmetric
Original Articles

Unity/Variable-gain Voltage-mode/Current-mode First-order All-pass Filters Using Single Dual-X Second-generation Current Conveyor

&
Pages 305-312 | Published online: 01 Sep 2014

References

  • A Zeki and A Toker, “The dual-X current conveyor (DXCCII): A new active device for tunable continuous- time filters,” International Journal of Electronics, Vol. 89, pp. 913–23, 2002.
  • A Zeki and A Toker, “DXCCII-based tunable gyrator,” International Journal of Electronics and Communications (AEÜ), Vol. 59, pp. 59–62, 2005.
  • E Yuce and S Minaei, “ICCII-based universal current-mode analog filter employing only grounded passive components, Analog Integrated Circuits and Signal Processing, Vol. 58, pp. 161–9, 2009.
  • S Minaei, “Electronically tunable current-mode universal biquad filter using dual-X current conveyors” Journal of Circuits, Systems and Computers, Vol. 18, pp. 665–80, 2009.
  • G W Roberts and A S Sedra, “All current-mode frequency selective circuits,” Electronics Letters, Vol. 25, pp. 759–61, 1989.
  • R Senani and V K Singh, “KHN-equivalent biquad using current conveyors,” Electronics Letters, Vol. 31, pp. 626–28, 1995.
  • E Yuce and S Minaei, “Universal current-mode filters and parasitic impedance effects on the filter performances,” International Journal of Circuit Theory and Applications, Vol. 36, pp. 161–71, 2008.
  • D T Comer, D J Comer, and J R Gonzales, “A high frequency integrable band pass filter configuration,” IEEE Transactions on Circuits and Systems-II. Analog and Digital Signal Processing, Vol. 44, pp. 856–61, 1997.
  • S J G Gift, “The application of all-pass filters in the design of multiphase sinusoidal systems,” Microelectronics Journal, Vol. 31, pp. 9–13, 2000.
  • O Cicekoglu, H Kuntman, and S Berk, “All-pass filters using a single current conveyor,” International Journal of Electronics, Vol. 86, No. 8, pp. 947–55, 1999.
  • M Higashimura and Y Fukui, “Realization of all-pass networks using a current conveyor,” International Journal of Electronics, Vol. 65, No. 2, pp. 249–50, 1988.
  • M Higashimura and Y Fukui, "Realization of current mode all-pass networks using a current conveyor,” IEEE Trans. CAS, Vol. 37, No. 5, pp. 660–1, 1990.
  • A M Soliman, “Generation of current conveyor based all-pass filters from op-amp based circuits,” IEEE Trans. CAS-II. Vol. 44, No. 4, pp. 324–30, 1997.
  • I A Khan and S Maheshwari, “Simple first order all-pass section using a single CCII,” International Journal of Electronics, Vol. 87, No. 3, pp. 303–6, 2000.
  • S Maheshwari and I A Khan, “Novel first order all-pass sections using a single CCIII,” International Journal of Electronics, Vol. 88, No. 7, pp. 773–8, 2001.
  • A Toker, S Ozcan, H Kuntman, and O Cicekoglu, “Supplementary all-pass sections with reduced number of passive elements using a single current conveyor,” International Journal of Electronics, Vol. 88, No. 9, pp. 969–76, 2001.
  • N Pandey and S K Paul, “All-pass filters based on CCII- and CCCII-,” International Journal of Electronics, Vol. 91, No. 8, pp. 485–9, 2004.
  • S Minaei, “A new high performance CMOS third generation current conveyor (CCIII) and its application,” Electrical Engineering, Vol. 85, No. 3, pp. 147–53, 2003.
  • J W Horng, C L Hou, C M Chang, Y T Lin, I C Shiu, and W Y Chiu, “First-order all-pass filter and sinusoidal oscillators using DDCCs,” International Journal of Electronics, Vol. 93, No. 7, pp. 457–66, 2006.
  • H P Chen and K H Wu, “Grounded-capacitor first-order filter using minimum components,” IEICE Trans. Fundamentals, Vol. E89-A, No. 12, pp. 3730–1, 2006.
  • M A Ibrahim, H Kuntman, and O Cicekoglu, “First-order all-pass filter canonical in the number of resistors and capacitors employing a single DDCC,” Circuits, Systems, and Signal Processing, Vol. 22, No. 5, pp. 525–36, 2003.
  • B Metin and K Pal, “Cascadable allpass filter with a single DO-CCII and a grounded capacitor”, Analog Integrated Circuits and Signal Processing, Vol. 61, pp. 259–63, 2009.
  • B Metin and O Cicekoglu, “Component reduced all-pass filter with a grounded capacitor and high impedance input”, International Journal of Electronics, Vol. 96, No. 5, pp. 445–55, 2009.
  • J W Horng, L Hou, M Chang, Y Chung, L Liu, and T Lin, “High output impedance current-mode first-order allpass networks with four grounded components and two CCIIs,” International Journal of Electronics, Vol. 93, No. 9, pp. 613–21, 2006.
  • J W Horng, “Current conveyors based allpass filters and quadrature oscillators employing grounded capacitors and resistors,” Computers and Electrical Engineering, Vol. 31, No. 1, pp. 81–92, 2005.
  • S Maheshwari, “High input impedance VM-APSs with grounded passive elements,” IET Circuits, Devices and Systems, Vol. 1, No. 1, pp. 72–8, 2007.
  • S Maheshwari, “High input impedance voltage-mode first-order all-pass sections,” International Journal of Circuit Theory and Applications, Vol. 36, pp. 511–22, 2008.
  • S Maheshwari, “A canonical voltage-controlled VM-APS with a grounded capacitor,” Circuits Systems and Signal Processing, Vol. 27, pp. 123–32, 2008.
  • S Maheshwari, “A new current-mode current-controlled all-pass section,” Journal of Circuits, Systems, and Computers, Vol. 16, pp. 181–9, 2007.
  • S Minaei and S M A Ibrahim, “General configuration for realizing current-mode first-order all-pass filter using DVCC,” International Journal of Electronics, Vol. 92, No. 6, pp. 347–56, 2005.
  • S Maheshwari, “High output impedance current-mode all-pass sections with two grounded passive components,” IET: Circuits, Devices, and Systems, Vol. 2, No. 2, pp. 234–42, 2008.
  • S Maheshwari, “Grounded capacitor CM-APS with high output impedance,” Journal of Circuits, Systems and Computers, Vol. 16, No. 4, pp. 567–76, 2007.
  • B Metin, K Pal, and O Cicekoglu, “All-pass filter for rich cascadability options easy IC implementation and tunability,” International Journal of Electronics, Vol. 94, No. 11, pp. 1037–45, 2007.
  • D Biolek and V Biolkova, “Allpass filter employing one grounded capacitor and one active element” Electronics Letters, Vol. 45, No. 16, pp. 807–8, 2009.
  • G Wilson and P K Chan, “Novel voltage-controlled grounded resistor,” Electronics Letters, Vol. 25, pp. 1725–6, 1989.
  • G Wilson and P K Chan, “Floating CMOS resistor,” Electronics Letters, Vol. 29, pp. 306–7, 1993.
  • S Minaei, O K Sayin, and H Kuntman, “A new CMOS electronically tunable current conveyor and its application to current-mode filters,” IEEE Transactions on Circuits and Systems Part-I: Regular Papers, Vol. 53, pp. 1448–57, 2006.
  • A De Marcellis, G Ferri, N C Guerrini, G Scotti, V Stornelli, and A Trifiletti, “The VCG-CCII: A novel building block and its application to capacitance multiplication,” Analog Integrated Circuits and Signal Processing, Vol. 58, No. 1, pp. 55–9, 2009.
  • A Fabre, O Saaid, and H Barthelemy, “On the frequency limitations of circuits based on second generation current conveyors”, Analog Integrated Circuits and Signal Processing, Vol. 7, pp. 113–29, 1995.
  • E Yuce and S Minaei “A new full-wave rectifier circuit employing single dual-X current conveyor” International Journal of Electronics, Vol. 95, No. 8, pp. 777–84, 2008.
  • E Yuce, S Minaei, and O Cicekoglu, “Full-wave rectifier realization using only two CCII+s and NMOS transistors”, International Journal of Electronics, Vol. 93, No. 8, pp. 533–41, 2006.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.