147
Views
2
CrossRef citations to date
0
Altmetric
Articles

Application of Artificial Neural Network and Adaptive Neuro-Fuzzy Inference System for the Modelling and Simulation of QCA Circuits

, , &

REFERENCES

  • C. S. Lent and P. D. Tougaw. (1997). “A device architecture for computing with quantum dots,” Proc. IEEE. 85 (4), pp. 541–557.
  • C. S. Lent and P. D. Taugaw. (1996). “Dynamic behavior of quantum cellular automata,” J. Appl. Phys. 80 (8), pp. 4722–4736.
  • W. Porod. (1997). “Quantum-dot devices and quantum-dot cellular automata,” Int. J. Bifurcation Chaos 7 (10), pp. 2199–2218.
  • K. Navi, R. Farazkish, S. Sayedsalehi and M. R. Azghadi. (2010). “A new quantum-dot cellular automata full-adder,” Microelectr. J. 41 (12), pp. 820–826.
  • C. G. Smith. (1999). “Computation without current,” Science 284 (5412), pp. 274–284.
  • B. Isaksen and C. S. Lent, “Molecular quantum dot cellular automata,” in 3rd IEEE Conference on Nanotech, vol. 1, 2003, pp. 5–8.
  • X. Yang, L. Cai, X. Zhao and N. Zhang. (2010). “Design and simulation of sequential circuits in quantum-dot cellular automata: Falling edge-triggered flip-flop and counter study,” Microelectr. J. 41 (1), pp. 56–63.
  • N. Gupta, S. Shrivastava, N. Patidar, S. Katiyal and K. K. Choudhary. (2012). “Design of one bit arithmetic logic unit (ALU) in QCA,” Int. J. Comp. Appl. Eng. Sci. 2 (3), pp. 281–285.
  • M. Hayati and A. Rezaei. (2014). “An efficient and optimized multiplexer design for quantum-dot cellular automata,” J. Computat. Theor. Nanosci. 11, pp. 297–302.
  • D. Tougaw, E. W. Johnson and D. Egley. (2012). “Programmable logic implemented using quantum-dot cellular automata,” IEEE Trans. Nanotechnol. 11 (4), pp. 739–745.
  • I. Amlani, A. O. Orlov, G. Toth, C. S. Lent, G. H. Bernstein and G. L. Snider. (1999). “Digital logic gate using quantum-dot cellular automata,” Appl. Phys. Lett. 284, pp. 289–291.
  • M. Choi, Z. Patitz and N. Park, “Efficient and robust delay-insensitive QCA (Quantum-Dot Cellular Automata) design,” in Proc. 21st IEEE Int. Symp. Defect and Fault-Tolerance in VLSI Systems, vol. 21, 2006, pp. 80–88.
  • J. C. Das and D. De. (2015). “Reversible binary to grey and grey to binary code converter using QCA,” IETE J. Res. 61 (3), pp. 223–229.
  • A. K. Bindra and V. P. Kodali. (2015). “Realization of sharp cut-off UHF and microwave frequency active filters,” IETE J. Res. 20 (9), pp. 460–464.
  • K. Walus, V. S. Dimitrov and G. A. Julliaen. (2003). “Computer architecture structure for quantum cellular automata,” 3rd IEEE Nanotech. Conf., 2, pp. 1435–1439.
  • M. Hayati and A. Rezaei. (2012). “Design and optimization of full comparator based on quantum-dot cellular automata,” ETRI J. 34 (2), pp. 284–287.
  • M. Hayati and A. Rezaei. (2013). “Design of novel efficient XOR gates for quantum-dot cellular automata,” J. Comput. Theor. Nanosci. 10 (3), pp. 643–647.
  • I. Hänninen and J. Takala. (2008). “Binary adders on quantum-dot cellular automata,” J. Signal Process Syst. 58, pp. 87–103.
  • S. Bhanja, M. Ottavi, S. Pontarelli and F. Lombardi. (2008). “QCA circuits for robust coplanar crossing, emerging nanotechnologies,” Frontiers in Elect. Test. 37, pp. 227–249.
  • (2016). QCADesigner. Available:http://www.mina.ubc.ca/qcadesigner.
  • C.S. Lent et al., “Aquinas: A quantum interconnected network array simulator,” in Proc. Fifth Int. Workshop on Computational Electronics, University Notre Dame, Notre Dame, IN, 1997.
  • M. T. Niemier, M. J. Kontz and P. M. Kogge, “A design of and design tools for a novel quantum dot based microprocessor,” in 27th Ann. Design Automation Conference, 2000, pp. 227–232.
  • E. N. Ganesh. (2010). “Quantum cellular automata majority circuit simulation using simulated annealing genetic algorithm,” Int. J. Eng. Sci. Technol. 2 (7), pp. 3277–3286.
  • S. Henderson, E. Johnson, J. Janulis and P. D. Tougaw. (2004). “Incorporating standard CMOS design process methodologies into the QCA logic design process,” IEEE Trans. Nanotechnol. 3, pp. 2–9.
  • M. Ottavi, L. Schiano, F. Lombardi and D. Tougaw. (2006). “HDLQ: A HDL environment for QCA design,” J. Emerg. Technol. Comput. Syst. 2 (4), pp. 243–261.
  • O. P. VilelaNeto, M. A. C. Pacheco and C. R. Barbosa. (2012). “Neural network simulation and evolutionary synthesis of QCA circuits,” IEEE Trans. Comp. 56 (2), pp. 191–201.
  • J. G. Taylor, Neural Networks and Their Applications. West Sussex, UK: John Wiley & Sons Ltd, 1996.
  • A. R. Gallant and H. White. (1992). “On learning the derivatives of an unknown mapping with multilayer feed forward networks,” Neural Netw. 5, pp. 129–138.
  • H. Takagi, “Application of neural networks and fuzzy logic to consumer products,” in Proc. Int. Conf. on Industrial Fuzzy Electronics, Control, Instrumentation, and Automation, vol. 3, 2000, pp. 1629–1639.
  • J. S. R. Jang. (1993). “ANFIS: Adaptive-network-based fuzzy inference systems,” IEEE Trans. Syst. Man Cybernetics. 23, pp. 665–685.
  • J. S. R. Jang, C. T. Sun and E. Mizutani, A Computational Approach to Learning and Machine Intelligence Neuro-Fuzzy and Soft Computing. (US edition). Upper Saddle River, NJ: Prentice Hall, 1997pp. 1482–1484.
  • M. Hayati, A. Rezaei and M. Seifi. (2010). “CNT-MOSFET modeling based on artificial neural network: Application to simulation of nanoscale circuits,” Solid-State Electron. 54 (1), pp. 52–57.
  • M. Mustafa and M. R. Beigh. (2013). “Design and implementation of quantum cellular automata based novel parity generator and checker circuits with minimum complexity and cell count,” IJPAP. 51 (1), pp. 60–66.
  • M. Hayati, A. Rezaei, M. Seifi and A. Naderi. (2010). “Modeling and simulation of combinational CMOS logic circuits by ANFIS,” Microelectr. J. 41 (7), pp. 381–387.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.