145
Views
0
CrossRef citations to date
0
Altmetric
Articles

Novel Quadrature Voltage-Controlled Oscillator Using Capacitor Coupling

ORCID Icon

REFERENCES

  • M. Kraemer, D. Dragomirescu and R. Plana. (2011). “A high efficiency differential 60 GHz VCO in a 65 nm CMOS technology for WSN applications,” IEEE Microw. Wirel. Compon. Lett. 21(6), pp. 314–316.
  • Q. Zou, K. Ma and K. S. Yeo. “A low phase noise and wide tuning range millimeter-wave VCO using switchable coupled VCO-cores,” IEEE Trans. Circuits Syst. I 62(2), pp. 554–563.
  • P. EAllen and D. R. Holberg. CMOS Analog Circuit Design. London: Oxford University Press, 2005, pp. 92–130.
  • J. P. Maligeorgos and J. R. long. (2000). “A low voltage 5.1-5.8 GHz image reject receiver with wide dynamic range,” IEEE J. Solid-State Circuits 35(7), pp. 1917–1926.
  • S. Ann, J. Park, J. Yu and N. Kim. “High performance injection-locked frequency divider with 50 GHz LC cross-coupled oscillator in 0.18 µm CMOS process,” in 2015 IEEE 19th Workshop on Signal and Power Integrity (SPI), Berlin, Germany, 2015, pp. 1–4.
  • T. Siriburanon, T. Ueno, K. Kimura, S. Kondo, W. Deng, K. Okada and A. Matsuzawa. “A 60-GHz sub-sampling frequency synthesizer using sub-harmonic injection-locked quadrature oscillators,” in 2014 IEEE Radio Frequency Integrated Circuits Symposium, Tampa Bay, FL, 2014, pp. 105–108.
  • A. Mazzanti, P. Uggetti, P. Rossi and F. Svelto. “Injection locking LC dividers for low power quadrature generation,” in Proc. IEEE Custom Integrated Circuit Conference, San Jose, CA, 2003, pp. 563–566.
  • J. Jin. (2014). “Low power current-mode voltage controlled oscillator for 2.4 GHz wireless applications,” Comput. Electric. Engg. 40(1), pp. 92–99.
  • C. Sakul, W. Jaikla and K. Dejhan. (2011). “New resistorless current-mode quadrature oscillators using 2 CCCDTAs and grounded capacitors,” Radioengineering 20(4), pp. 890–897.
  • J. Jin and C. Wang. (2013). “CDTA-based electronically tunable current-mode quadrature oscillator,” Int. J. Electron. 101(8), pp. 1086–1095.
  • W. Jaikla and A. Lahiri. (2012). “Resistor-less current-mode four-phase quadrature oscillator using CCCDTAs and grounded capacitors,” AEU – Int. J. Electron. Commum. 66, pp. 214–218.
  • J. Jin and C. Wang. (2012). “Single CDTA-based current-mode quadrature oscillator.” AEU – Int. J. Electron. Commum. 66(11), pp. 933–936.
  • M. T. Hsu, W. H. Li and Y. T. Hsu. (2014). “Design of self-bias tail transistor technique for low phase noise CMOS VCO with harmonic suppression using capacitance ground,” Microelectron. J. 45(1), pp. 35–42.
  • S. Jain and S. L. Jang. (2014). “Indirect back-gate coupling quadrature LC-VCO,” IEEE Microw. Wireless Compon. Lett. 24(2), pp. 117–119.
  • W. Li and K. K. M. Cheng. (2013). “A CMOS transformer-based current reused SSBM and QVCO for UWB application,” IEEE Trans. Microwave Theory Techn. 61(6), pp. 2395–2401.
  • Q. Wan, Y. Liu and Q. Wang. (2015). “A CMOS back-gate coupling LC quadrature VCO with switched self-biasing tail transistor technique,” Circuits Syst. Signal Process, 34(10), pp. 3147–3160.
  • T. H. Huang and Y. R. Tseng. (2008). “A 1 V 2.2 mW 7 GHz CMOS quadrature VCO using current-reuse and cross-coupled transformer-feedback technology,” IEEE Microw. Wireless Compon. Lett. 18(10), pp. 698–700.
  • N. J. OH, S. G. LEE. (2005). “Current reused LC VCOs,” IEEE Microw. Wireless Compon. Lett. 15(11), pp. 736–738.
  • A. Demir, “Phase noise in oscillators: DAEs and colored noise sources,” in IEEE/ACM International Conference on Computer-Aided Design (ICCAD ’98). Digest of Technical Papers, New York, 1998, pp. 170–177.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.