A Miniaturized Band-Reject Filter Using Metamaterial Structures on Silicon Substrate for X-Band Application

References

• Z. Yong, Z. Jian, Y. Yuanwei, C. Chen, and J. S. Xing, “A Ku-band novel micromachined bandpass filter with two transmission zeros,” DTIP of MEMS and MOEMS, 26–28 April, ISBN: 2-916187-03-0, pp. 1–4, 2006.
   Google Scholar
• B. Pradhan, and B. Gupta, “Comb line notch filter design on silicon coplanar transmission line,” Int. J. Sci. Eng. Res., Vol. 3, no. 6, pp. 1–5, 2012.
   Google Scholar
• B. Pradhan, and B. Gupta, “Ku-band RF MEMS tunable comb line band reject filter on coplanar transmission line,” AEU – Int. J Electron. C., Vol. 67, pp. 463–9, 2013. doi: 10.1016/j.aeue.2012.11.003
   Web of Science ®Google Scholar
• J. B. Pendry, A. J. Holden, D. J. Robbins, and W. J. Stewart, “Magnetism from conductors and enhanced nonlinear phenomena,” IEEE Trans. Microw. Theory Tech., Vol. 47, pp. 2075–84, 1999. doi: 10.1109/22.798002
   Web of Science ®Google Scholar
• D. R. Smith, W. J. Padilla, D. C. Vier, S. C. Nemat-Nasser, and S. Schultz, “Composite medium with simultaneously negative permeability and permittivity,” Phys. Rev. Lett., Vol. 84, pp. 4184–7, 2000. doi: 10.1103/PhysRevLett.84.4184
   PubMed Web of Science ®Google Scholar
• F. Falcone, T. Lopetegi, J. D. Baena, R. Marques, F. Martın, and M. Sorolla, “Effective negative-/spl epsiv/ stopband microstrip lines based on complementary split ring resonators,” IEEE Microw. Wirel Co. Lett., Vol. 14, pp. 280–2, 2004. doi: 10.1109/LMWC.2004.828029
   Web of Science ®Google Scholar
• F. Falcone, et al., “Babinet principle applied to the design of metasurfaces and metamaterials,” Phys. Rev. Lett., Vol. 93, pp. 197401–5, 2004. doi: 10.1103/PhysRevLett.93.197401
   PubMed Web of Science ®Google Scholar
• J. D. Baena, R. Marques, F. Medina, and J. Martel, “Artificial magnetic metamaterial design by using spiral resonators,” Phys. Rev. B., Vol. 69, pp. 014402–5, 2004. doi: 10.1103/PhysRevB.69.014402
   Web of Science ®Google Scholar
• F. Falcone, et al., “Stop-band and band-pass characteristics in coplanar waveguides coupled to spiral resonators,” Microw. Opt. Technol. Lett., Vol. 42, pp. 386–8, 2004. doi: 10.1002/mop.20312
   Web of Science ®Google Scholar
• F. Bilotti, A. Toscano, L. Vegni, K. Aydin, K. B. Alici, and E. Ozbay, “Equivalent-circuit models for the design of metamaterials based on artificial magnetic inclusions,” IEEE Trans. Microw. Theory Tech., Vol. 55, pp. 2865–73, 2007. doi: 10.1109/TMTT.2007.909611
   Web of Science ®Google Scholar
• F. Bilotti, A. Toscano, and L. Vegni, “Design of spiral and multiple split-ring resonators for the realization of miniaturized metamaterial samples,” IEEE Trans. Antennas Propag., Vol. 55, pp. 2258–67, 2007. doi: 10.1109/TAP.2007.901950
   Web of Science ®Google Scholar
• A. V. Rogacheva, V. A. Fedotov, A. S. Schwanecke, and N. I. Zheludev, “Giant gyrotropy due to electromagnetic-field coupling in a bilayered chiral structure,” Phys. Rev. Lett., Vol. 97, pp. 177401–4, 2006. doi: 10.1103/PhysRevLett.97.177401
   PubMed Web of Science ®Google Scholar
• R. Marques, L. Jelinek, and F. Mesa, “Negative refraction from balanced quasi-planar chiral inclusions,” Microw. Opt. Technol. Lett., Vol. 49, pp. 2606–9, 2007. doi: 10.1002/mop.22736
   Web of Science ®Google Scholar
• J. Martel, R. Marques, F. Falcone, J. D. Baena, F. Medina, F. Martın, and M. Sorolla, “A new LC series element for compact bandpass filter design,” IEEE Microw. Wireless Compon. Lett, Vol. 14, pp. 210–2, 2004. doi: 10.1109/LMWC.2004.827836
   Web of Science ®Google Scholar
• A. Velez, F. Aznar, J. Bonache, M. C. Velazquez-Ahumada, J. Martel, and F. Martın, “Open complementary split ring resonators (OCSRRs) and their application to wideband CPW band pass filters,” IEEE Microw. Wireless Compon. Lett., Vol. 19, pp. 197–9, 2009. doi: 10.1109/LMWC.2009.2015490
   Web of Science ®Google Scholar
• A. Erentok, P. L. Luljak, and R. W. Ziolkowski, “Characterization of a volumetric metamaterial realization of an artificial magnetic conductor for antenna applications,” IEEE Trans. Antennas Propag, Vol. 53, pp. 160–72, 2005. doi: 10.1109/TAP.2004.840534
   Web of Science ®Google Scholar
• R. Marques, F. Martin, and M. Sorolla, Metamaterials with negative parameters, theory, design and microwave applications. John Wiley and Sons Ltd, 2008.
   Google Scholar
• B. Pradhan, and B. Gupta, “Ka-Band Tunable filter using metamaterials and RF MEMS varactors,” Microelectromech. Syst. J. IEEE., Vol. 24, no. 5, pp. 1453–61, 2015. doi: 10.1109/JMEMS.2015.2410424
   Web of Science ®Google Scholar
• I. Gil, F. Martin, X. Rottenberg, and W. De Raedt, “Tunable stop-band filter at Q-band based on RF MEMS metamaterials,” Elect. Lett., Vol. 43, pp. 1153, 2007. doi: 10.1049/el:20072164
   Web of Science ®Google Scholar
• F. Aznar, M. Gil, J. Bonache, and F. Martin, “Modelling metamaterial transmission lines: A review and recent developments,” Opto-Electron Rev., Vol. 16, pp. 226–36, 2008. doi: 10.2478/s11772-008-0028-x
   Web of Science ®Google Scholar
• L. Zhu, and W. Menzel, “Compact microstrip bandpass filter with two transmission zeros using a stub-tapped half-wavelength line resonator,” IEEE Microw. Wireless Compon.Lett, Vol. 13, pp. 16–8, 2003. doi: 10.1109/LMWC.2002.807705
   Web of Science ®Google Scholar
• M. G. Barbara, “Resonant type metamaterial transmission lines and their application to microwave device design,” Ph.D Thesis, University at Altonomade Barcelona, Spain, 2009.
   Google Scholar
• F. Falcone, F. Martin, J. Bonache, R. Marques, and M. Sorolla, “Coplanar waveguide structures loaded with split-ring resonators,” Microw. Opt. Technol. Lett., Vol. 40, pp. 3–6, 2004. doi: 10.1002/mop.11269
   Web of Science ®Google Scholar
• F. Martin, F. Falcone, J. Bonache, R. Marques, and M. Sorolla, “Miniaturized coplanar waveguide stop band filters based on multiple tuned split ring resonators,” IEEE Microwave Compon. Lett., Vol. 13, pp. 511–3, 2003. doi: 10.1109/LMWC.2003.819964
   Web of Science ®Google Scholar
• B. Pradhan and B. Gupta,“Novel tunable band reject filter using RF MEMS technology,” in IEEE TechSym 2014 IEEE Students’ Technology Symposium 2014, IIT-Kharagpur, India, 2014, pp. 335–9.
   Google Scholar
• F. Martin, F. Falcone, J. Bonache, R. Marques, and M. Sorolla, “Split ring resonator-based left-handed coplanar waveguide,” Appl. Phys. Lett., Vol. 83, pp. 4652–4, 2003. doi: 10.1063/1.1631392
   Web of Science ®Google Scholar
• J.-C. Liu, H.-C. Lin, K.-D. Yeh, and B.-H. Zeng, “Complementary split ring/loop resonators with dual mesh shaped couplings for wide pass/stop-band BPF design,” Prog. Electrom. Res. Lett., Vol. 10, pp. 19–28, 2009. doi: 10.2528/PIERL09060402
   Google Scholar
• A. L. Borja, J. Carbonell, V. E. Boria, J. Cascon, and D. Lippens, “A 2% bandwidth C-band filter using cascaded split ring resonators,” IEEE. Antenn. Wirel. Pr., Vol. 9, pp. 256–9, 2010. doi: 10.1109/LAWP.2010.2046711
   Web of Science ®Google Scholar
• R. N. Simons, Coplanar waveguide circuits, components and systems. New York: John Wiley and Sons, Inc., p. 11.
   Google Scholar
• S. S. Karthikeyan, and R. S. Kshetrimayum, “Compact, deep and wide rejection bandwidth low-pass filter using open complementary split ring resonator,” Microw. Opt. Technol. Lett., Vol. 53, no. 4, pp. 845–8, Apr. 2011. doi: 10.1002/mop.25874
   Web of Science ®Google Scholar
• S. Gevorgian, A. Deleniv, T. Martinsson, S. Galchenko, P. Linner and I. Vendik, “CAD model of a gap in a coplanar waveguide,” Int. J. Microw. Millim.-Wave Comput.-Aided Eng, Vol. 6, pp. 369–77, 1996. doi: 10.1002/(SICI)1522-6301(199609)6:5<369::AID-MMCE7>3.0.CO;2-E
   Web of Science ®Google Scholar
• J. Bonache, et al. “Super compact split ring resonators CPW band pass filters,” IEEE-MTT International Microwave Symposium Digest, Fort Worth, TX, 2004, pp. 1483–6.
   Google Scholar
• M. Duran-Sindreu, et al. “Analysis and applications of OSRR- and OCSRR-loaded transmission lines: A new path for the design of compact transmission line metamaterials,” Elsevier Journal (Metamaterials 4), Vol. 3, pp. 139–48, 2010.
   Google Scholar
• S. S. Karthikeyan, and R. S. Kshetrimayum, “Compact wideband band pass filter using open slot split ring resonator and CMRC,” Prog. Electrom. Res. Lett., Vol. 10, pp. 39–48, 2009. doi: 10.2528/PIERL09061602
   Google Scholar
• X. Y. Zhang, and Q. Xue, “Novel centrally loaded resonators and their applications to bandpass filter,” IEEE Trans. Microw. Theory Tech, Vol. 56, pp. 913–21, 2008. doi: 10.1109/TMTT.2008.919648
   Web of Science ®Google Scholar
• C. Caloz, and T. Itoh, “Application of transmission line theory of left-handed (LH) materials to the realization of a microstrip LH transmission line,” Proceedings of the IEEE-AP-S USNC/URSI National Radio Science Meeting, San Antonio, TX, 2002, pp. 412–5.
   Google Scholar
• G. M. Rebeiz, RF MEMS theory, design, and technology. John Wiley & Sons Ltd, 2003, ch. 1, 9 and 10, pp. 1–20, 259–324.
   Google Scholar
• B. Pradhan, and B. Gupta, “Effect of residual stress on CSRR based RF MEMS filter,” J. Phys. Sci., Vol. 18, pp. 76–82, 2014.
   Google Scholar
• B. Pradhan, and B. Gupta, “Realization and characterization of surface micromachined tunable band stop CSRR filter using MEMS bridges on silicon substrate,” Microelectron. Eng., Vol. 133, pp. 66–72, 2015. doi: 10.1016/j.mee.2014.11.019
   Web of Science ®Google Scholar