References
- M.S. Liu, M.C.C. Lin, I.T. Huang, and C.C. Wang, “Enhancement of thermal conductivity with CuO for nanofluids’,” Chem. Eng. Technol., vol. 29, no. 1, pp. 72–7, 2006. doi: https://doi.org/10.1002/ceat.200500184
- H. Jin, T. Andritsch, I.A. Tsekmes, R. Kochetov, P.H.F. Morshuis, and J.J. Smit, “Properties of mineral oil based silica nanofluids’,” IEEE Trans. Dielectr. Electr. Insul., vol. 21, no. 3, pp. 1100–8, 2014. doi: https://doi.org/10.1109/TDEI.2014.6832254
- A. Thabet, M. Allam, and S.A. Shaaban, “Investigation on enhancing breakdown voltages of transformer oil nanofluids using multi-nanoparticles technique,” IET. Gener. Transm. Distrib., vol. 12, no. 5, pp. 1171–6, 2018. doi: https://doi.org/10.1049/iet-gtd.2017.1183
- T.V. Oommen, C.C. Claiborne, and J.T. Mullen, “Biode-gradable electrical insulation fluids,” Proc.: Electrical Insulation Conf. and Electrical Manufacturing and Coil Winding Conference, 1997, pp. 465–468.
- W.H. Bartley, “Investigating Transformer Failures,” in Proc. of the Weidmann-ACTI 5th Annual Technical Conf. on New Diagnostic Concepts for Better Asset Management, November 2006. pp. 1–7.
- S. Okabe, S. Kaneko, M. Kohtoh, and T. Amimoto, “Analysis results for insulating oil components in field transformers,” IEEE Trans. Dielect. Electr. Insul., vol. 17, no. 1, pp. 302–11, 2010. doi: https://doi.org/10.1109/TDEI.2010.5412031
- S. Choi, “Enhancing thermal conductivity of fluids with nanoparticles,” ASME – Publications – FED, no.231, pp. 99–102, 1995.
- A. Joshil, and S. Kumar, “Variation of dielectric strength of a insulation paper with thermal aging,” NDT & E Inter., Vol. 38, pp. 459–61, 2005. doi: https://doi.org/10.1016/j.ndteint.2004.12.006
- M. Rafiq, Y.Z. Lv, Y. Zhou, K.B. Ma, W. Wang, C.R. Li, and Q. Wang, “Use of vegetable oils as transformer oils – a review,” Renewable Sustainable Energy Rev., vol. 52, pp. 308–24, 2015. doi: https://doi.org/10.1016/j.rser.2015.07.032
- S. K. Das, S. Choi, W. Yu, T. Pradeep, Nanofluids: Science and Technology. Hoboken, NJ: John Wiley & Sons, Inc, 2007.
- M. Jama, T. Singh, S.M. Gamaleldin, M. Koc, A. Samara, R.J. Isaifan, and M.A. Atieh, “Critical review on nanofluids: preparation, characterization, and applications,” J. Nanomater., Vol. 2016, pp. 1–22, 2016. doi: https://doi.org/10.1155/2016/6717624
- W. Yu, and H. Xie, “A review on nanofluids: preparation, stability mechanisms, and applications,” J. Nanomater., Vol. 2012, pp. 17–17, 2012.
- S.K. Das, S.U. Choi, and H.E. Patel, “Heat transfer in nanofluids—a review,” Heat Transfer Eng., vol. 27, no. 10, pp. 3–19, 2006. doi: https://doi.org/10.1080/01457630600904593
- V. Segal, A. Hjorstberg, A. Rabinovich, D. Nattrass, K. Raj, “AC (60 Hz) and impulse breakdown strength of a colloidal fluid based on transformer oil and magnetite nanoparticles,” IEEE Inter. Symp. on Electrical Insulation, 1998, pp. 619–622.
- S. Sumathi, and P. Subburaj, “Performance analysis of nanomaterials based transformer oil,” Asian J. Res. Soc. Sci. Humanities, vol. 7, no. 2, pp. 678–90, 2017. doi: https://doi.org/10.5958/2249-7315.2017.00120.4
- J. C. Lee, H. S. Seo, Y. J. Kim, “The increased dielectric breakdown voltage of transformer oil-based nanofluids by an external magnetic field,” Inter. J. Therm. Sci., vol. 62, pp. 29–33, 2012. doi: https://doi.org/10.1016/j.ijthermalsci.2012.03.013
- B. Du, J. Li, F. Wang, W. Yao, and S. Yao, “Influence of monodisperse Fe3O4 nanoparticle size on electrical properties of vegetable oil-based nanofluids,” J. Nanomater., Vol. 2015, pp. 1–9, 2015.
- V. Segal, A. Rabinovich, D. Nattrass, K. Raj, and A. Nunes, “Experimental study of magnetic colloidal fluids behavior in power transformers,” J. Magn. Magn. Mater., vol. 215-216, pp. 513–15, 2000. doi: https://doi.org/10.1016/S0304-8853(00)00205-5
- P. Kopcansky, L. Tomco, K. Marton, M. Koneracka, I. Potocova, and M. Timko, “The experimental study of the DC dielectric breakdown strength in magnetic fluids,” J. Magn. Magn. Mater., vol. 272-276, pp. 2377–8, 2004. doi: https://doi.org/10.1016/j.jmmm.2003.12.465
- M. Chiesa, and S. K. Das, “Experimental investigation of the dielectric and cooling performance of colloidal suspensions in insulating media,” Colloids Surf. A, vol. 335, pp. 88–97, 2009. doi: https://doi.org/10.1016/j.colsurfa.2008.10.044
- G. Pfaff, and P. Reynders, “Angle-dependent optical effects deriving from submicron structures of films and pigments,” Chem. Rev., vol. 99, pp. 1963–82, 1999. doi: https://doi.org/10.1021/cr970075u
- W.S. Han, S.H. Rhi, “Thermal characteristics of grooved heat pipe with hybrid nanofluids,” Therm. Sci., vol. 15, pp. 195–206, 2011. doi: https://doi.org/10.2298/TSCI100209056H
- T.T. Baby, and R. Sundara, “Synthesis and transport properties of metal oxide decorated graphene dispersed nanofluids,” J. Phys. Chem. C, vol. 115, no. 17, pp. 8527–33, 2011. doi: https://doi.org/10.1021/jp200273g
- H.H. Balla, S. Abdullah, W. MohdFaizal, R. Zulkifli, and K. Sopian, “Numerical study of the enhancement of heat transfer for hybrid CuO-Cu nanofluids flowing in a circular pipe,” J. Oleo Sci., vol. 62, no. 7, pp. 533–9, 2013. doi: https://doi.org/10.5650/jos.62.533
- G, Taguchi, S. Konishi, and S. Konishi, Taguchi Methods: Orthogonal Arrays and Linear Graphs. Tools for Quality Engineering. Dearborn, MI: American Supplier Institute, 1987, pp. 35–8.
- M. Nataraj, and K. Balasubramanian. “Parametric optimization of CNC turning process for hybrid metal matrix composite,” Int. J. Adv. Manuf. Technol., Vol. 93, pp. 215–224, 2017. doi: https://doi.org/10.1007/s00170-016-8780-4
- K. Kanthavel, R. Palanisamy, and S. Vivek, “Investigation of the mechanical properties of bagasse fiber-reinforced epoxy composite using Taguchi and response surface methodology,” BioResources, vol. 10, pp. 3749–56, 2015.
- Y.C. Yeh, T.T. Tseng, and D.A. Chang, “Electrical properties of porous titania ceramic humidity sensors,” J. Am. Ceram. Soc., vol. 72, pp. 1472–5, 1989. doi: https://doi.org/10.1111/j.1151-2916.1989.tb07679.x
- P.S. Awati, S.V. Awate, P.P. Shah, and V. Ramaswamy, “Photocatalytic decomposition of methylene blue using nanocrystalline anatase titania prepared by ultrasonic technique,” Catal. Commun., vol. 4, pp. 393–400, 2003. doi: https://doi.org/10.1016/S1566-7367(03)00092-X
- H.F. Moafi, A.F. Shojaie, and M.A. Zanjanchi, “The comparison of photocatalytic activity of synthesized TiO2 and ZrO2 nanosize onto wool fibers,” Appl. Surf. Sci., vol. 256, pp. 4310–6, 2010. doi: https://doi.org/10.1016/j.apsusc.2010.02.022
- A. Tsevis, N. Spanos, P. G. Koutsoukos, A. J. Linde, and J. Lykleme, “Preparation and characterization of anatase powders,” J. Chem. Soc. Faraday Trans., vol. 94, pp. 295–300, 1998. doi: https://doi.org/10.1039/a706608b
- A.F. Shojaie, and M.H. Loghmani, “La3+ and Zr4+ co- doped anatase nano TiO2 by sol-microwave method,” Chem. Eng. J., vol. 157, pp. 263–9, 2010. doi: https://doi.org/10.1016/j.cej.2009.12.025
- B. Pourabbas, and B. Jamshidi, “Preparation of MoS2 nanoparticles by a modified hydrothermal method and the photo-catalytic activity of MoS2/TiO2 hybrids in photo-oxidation of phenol,” Chem. Eng. J., vol. 138, no. 1–3, pp. 55–62, 2008. doi: https://doi.org/10.1016/j.cej.2007.05.028
- A.F. Cotton, G. Wilkinson, M. Bochmann, and C.A. Murillo, Advanced Inorganic Chemistry. Hoboken, NJ: John Wiley & Sons, 1999.
- I. Asilturk, and S. Neşeli, “Multi response optimisation of CNC turning parameters via Taguchi method-based response surface analysis,” Measurement, vol. 45, pp. 785–94, 2012. doi: https://doi.org/10.1016/j.measurement.2011.12.004
- N.S. Mohan, S.M. Kulkarni, and A. Ramachandra, “Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials,” J. Mater. Process. Technol., vol. 186, no. 1–3, pp. 265–71, 2007. doi: https://doi.org/10.1016/j.jmatprotec.2006.12.043
- “IEC 156, Insulating Liquids – Determination of the Breakdown Voltage at Power Frequency – Test Method,” Second Edition, 1995.
- Z. Hessainia, A. Belbah, M.A. Yallese, T. Mabrouki, and J.F. Rigal, “On the prediction of surface roughness in the hard turning based on cutting parameters and tool vibrations,” Measurement, vol. 46, no. 5, pp. 1671–81, 2013. doi: https://doi.org/10.1016/j.measurement.2012.12.016
- D.C. Montgomery, Design and Analysis of Experiments. Hoboken, NJ: John Wiley & Sons, 2017.