References
- A. Sedra and K. Smith, C. Microelectronic Circuits. 6th ed., New York, NY: Oxford University Press, 2010.
- Y. H., Ghallab, and W. Badawy, Lab-on-a-chip: Techniques, Circuits, and Biomedical Applications. London: Artech House, 2010.
- R. Pallas-areny and J. G. Webster, “AC Instrumentation amplifier for bioimpedance measurements,” IEEE Trans. Biomed. Eng., Vol. 40, no. 8, pp. 830–3, Aug. 1993. doi:https://doi.org/10.1109/10.238470
- C. A. Prior, C. R. Rodrigues, A. L. Aita, J. B. S. Martins, and F. C. B. Vieira, “Design of an integrated low power high CMRR instrumentation amplifier for biomedical applications,” Analog. Integr. Circuits. Signal. Process., Vol. 57, no. 1–2, pp. 11–7, Jul. 2008. doi: https://doi.org/10.1007/s10470-008-9196-3
- R. Wu, J. H. Huijsing, and K. A. Makinwa, A Precision Instrumentation Amplifiers and Read-out Integrated Circuits. New York: Springer, 2013.
- J. M. Redoute and M. Steyaert, EMC of Analog Integrated Circuits. Netherlands: Springer, 2013.
- H. Ercan and A. Mustafa, “A new design for a BiCMOS controlled current conveyor,” Electron. Electr. Eng., Vol. 19, no. 1, pp. 356–60, 2013.
- L. Xiu and Z. Li, “Low-power instrumentation amplifier IC design for ECG system applications,” Procedia. Eng., Vol. 29, pp. 1533–8, 2012. doi:https://doi.org/10.1016/j.proeng.2012.01.168
- S. P. Almazan, L. I. Alunan, F. R. Gomez, J. M. Jarillas, M. T. Gusad, and M. Rosales, “Monolithic CMOS current-mode instrumentation amplifiers for ECG signals,” IFMBE. Proc., vol. 23, pp. 846–50, 2009. doi:https://doi.org/10.1007/978-3-540-92841-6_208
- J. Szynowski, “CMRR analysis of instrumentation amplifiers,” Electron. Lett., Vol. 19, no. 14, pp. 547, May 1983. doi:https://doi.org/10.1049/el:19830371
- R. Pallas-Areny and J. G. Webster, “Common mode rejection ratio in differential amplifiers,” IEEE Trans. Instrum. Meas., Vol. 40, no. 4, pp. 669–76, Aug. 1991. doi:https://doi.org/10.1109/19.85332
- R. Pallas-Areny and J. G. Webster, “Common mode rejection ratio for cascaded differential amplifier Stages,” IEEE Trans. Instrum. Meas., Vol. 40, no. 4, pp. 677–81, Aug. 1991. doi:https://doi.org/10.1109/19.85333
- C. Toumazou and F. J. Lidgey, “Novel current-mode instrumentation amplifier,” Electron. Lett., Vol. 25, no. 3, pp. 228–30, Dec. 1989. doi:https://doi.org/10.1049/el:19890163
- D. C. Agourridis and R. J. Fox, “Transresistance instrumentation amplifier,” Proc. IEEE, Vol. 66, no. 10, pp. 1286–7, 1978. doi:https://doi.org/10.1109/PROC.1978.11125
- S. J. G. Gift, “An enhanced current-mode instrumentation amplifier,” IEEE Trans. Instrum. Meas., Vol. 50, no. 1, pp. 85–8, Feb. 2001. doi:https://doi.org/10.1109/19.903882
- S. J. Azhari and H. Fazlalipoor, “A novel current mode instrumentation amplifier (CMIA) topology,” IEEE Trans. Instrum. Meas., Vol. 49, no. 6, pp. 1272–7, Dec. 2000. doi:https://doi.org/10.1109/19.893269
- K. Koli and K. A. I. Halonen, “CMRR Enhancement techniques for current-mode instrumentation amplifiers,” IEEE Trans. Circuits Syst. I, Fundam. Theory Appl., Vol. 47, no. 5, pp. 622–32, May 2000. doi:https://doi.org/10.1109/81.847869
- B. Babaei and S. Mirzakuchaki, “High CMRR, low power and Wideband current-mode instrumentation amplifier,” in 24th Norchip Conference, Linkoping (Sweden), pp. 121–124, 2006.
- B. Babaei and S. Mirzakuchaki, “High CMRR and low THD current-mode instrumentation amplifier using current inversion technique,” in 25th Norchip Conference, Aalborg (Denmark), 2007, pp. 1–4, 2007.
- E. Yuce and S. Minaei, “New CCII-based versatile structure for realizing PID controller and instrumentation amplifier,” Microelectron. J., Vol. 41, no. 5, pp. 311–16, Apr. 2010. doi:https://doi.org/10.1016/j.mejo.2010.03.008
- S. Maheshwari, “High CMRR wide bandwidth instrumentation amplifier using current controlled conveyors,” Int. J. Electron., Vol. 89, no. 12, pp. 889–96, 2003. doi:https://doi.org/10.1080/0020721031000120452
- H. Ercan, S. A. Tekin, and M. Alci, “Voltage-and current-controlled high CMRR instrumentation amplifier using CMOS current conveyors,” Turkish J. Electron. Eng. Comput. Sci., Vol. 20, no. 4, pp. 547–56, 2012.
- Z. M’harzi, M. Alami, and F. Temcamani, “Low voltage, high CMRR, and wide bandwidth novel current mode current controlled instrumentation amplifier,” Analog. Integr. Circuits. Signal. Process., Vol. 90, no. 1, pp. 199–205, 2017. doi:https://doi.org/10.1007/s10470-016-0873-3
- Y. H. Ghallab, W. Badawy, K. V. I. S. Kaler, Member, IEEE, and B. J. Maundy,“A novel current-mode instrumentation amplifier based on operational floating current conveyor,” IEEE Trans. Instrum. Meas., Vol. 54, no. 5, pp. 1941–49, Oct. 2005. doi:https://doi.org/10.1109/TIM.2005.854254
- R. Pandey, D. Nand, and, and N. Pandey, “Generalised operational floating current conveyor based instrumentation amplifier,” IET Circuits Devices Syst., vol. 10, no. 3, pp. 209–19, 2016. doi:https://doi.org/10.1049/iet-cds.2015.0243
- S. J. G. Gift, B. Maundy, and F. Muddeen, “High-performance current-mode instrumentation amplifier circuit,”Int. J. Electron., Vol. 94, no. 11, pp. 1015–24, Dec. 2007. doi:https://doi.org/10.1080/00207210701751188
- U. Cini and E. Arslan, “ A high gain and low-offset current-mode instrumentation amplifier using differential difference current conveyors,” in Proceedings of IEEE International Conference on Electronics, Circuits and Systems (ICECS), Cairo (Egypt), pp. 69–72, 2015.
- L. Safari and S. Minaei, “A novel COA-based electronically adjustable current-mode instrumentation amplifier topology,” AEU – Int. J. Electron. Commun., vol. 82, pp. 285–93, Aug. 2017. doi:https://doi.org/10.1016/j.aeue.2017.08.051
- R. Pandey, N. Pandey, and S. K. Paul, “Electronically tunable transimpedance instrumentation amplifier based on OTRA,” J. Eng., vol. 2013, pp. 5–10, 2013.
- H. Elwan and A. M. Soliman, “Novel CMOS differential voltage current conveyor and its applications,” IEE Proc. Circuits Devices Syst., Vol. 144, no. 3, pp. 195–200, Jun. 1997. doi:https://doi.org/10.1049/ip-cds:19971081
- D. Biolek, R. Senani, V. Biolkova, and Z. Kolka, “Active elements for analog signal processing: Classification, review, and new proposals,” Radioengineering, Vol. 17, no. 4, pp. 15–32, Dec. 2008.
- P. Kumar, A. U. Keskin, and K. Pal, “DVCC-Based single element controlled oscillators using all-grounded components and simultaneous current-voltage mode outputs,” Frequenz, Vol. 59, pp. 7–8, 2005. doi:https://doi.org/10.1515/FREQ.2005.59.9-10.235
- S. Minaei and E. Yuce, “Novel voltage-mode all-pass filter based on using DVCCs,” Circuits Syst. Signal Process., 2010, Vol. 29, no. 3, pp. 391–402, Feb. 2010. doi:https://doi.org/10.1007/s00034-010-9150-3
- S. Minaei and E. Yuce, “A simple Schmitt trigger circuit with grounded passive elements and its application to square/triangular wave generator,” Circuits Syst. Signal Process., Vol. 31, no. 3, pp. 877–88, 2012. doi:https://doi.org/10.1007/s00034-011-9373-y
- M. A. Ibrahim, E. Yuce, and S. Minaei, “A new DVCC-based fully cascadable voltage-mode full-wave rectifier,” J. Comput. Electron., vol. 15, no. 4, pp. 1440–9, Aug. 2016. doi:https://doi.org/10.1007/s10825-016-0891-5
- A. Bhattacharyya, “Differential voltage current conveyor based one-shot pulse generator circuit implementation,” Int. J. Sci. Technol., Vol. 9, no. 30, pp. 1–7, Aug. 2016.
- J. Weihorng, “Lossless inductance simulation and voltage-mode universal biquadratic filter with one input and five outputs using DVCCs,” Analog. Integr. Circuits. Signal. Process., Vol. 62, pp. 407–13, 2010. doi:https://doi.org/10.1007/s10470-009-9341-7