References
- A. A. Barlian, W. T. Park, J. R. Mallon, A. J. Rastegar, and B. L. Pruitt, “Review: semiconductor piezoresistance for microsystems,” Proc. IEEE, Vol. 97, no. 3, pp. 513–552, 2009. doi: https://doi.org/10.1109/JPROC.2009.2013612
- S. Guo, H. Eriksen, K. Childress, A. Fink, and M. Hoffman, “High temperature smart-cut SOI pressure sensor,” Sensors and Actuators, A Phys., Vol. 154, pp. 255–260, 2009. doi: https://doi.org/10.1016/j.sna.2009.03.011
- J. Akhtar, B. B. Dixit, B. D. Pant, and V. P. Deshwal, “Polysilicon piezoresistive pressure sensors based on MEMS technology,” IETE J. Res., Vol. 49, no. 6, pp. 365–377, 2003. doi: https://doi.org/10.1080/03772063.2003.11416360
- M. R. Werner, and W. R. Fahrner, “Review on materials, microsensors, systems, and devices for high-temperature and harsh-environment applications,” IEEE Trans. Ind. Electron, Vol. 48, no. 2, pp. 249–257, 2001. doi: https://doi.org/10.1109/41.915402
- H. P. Phan, D. V. Dao, K. Nakamura, S. Dimitrijev, and N. T. Nguyen, “The piezoresistive effect of SiC for MEMS sensors at high temperatures: a review,” J. Microelectromechanical Syst., Vol. 24, no. 6, pp. 1663–1677, 2015. doi: https://doi.org/10.1109/JMEMS.2015.2470132
- M. Werner, P. Gluche, M. Adamschik, E. Kohn, and H.-J. Fecht. “Review on diamond based piezoresistive sensors,” in IEEE International Symposium on Industrial Electronics. Proceedings. ISIE’98 (Cat. No.98TH8357), 1998, vol. 1, pp. 147–152.
- J. Dzuba, G. Vanko, M. Držk, I. Rýger, V. Kutiš, J. Zehetner, and T. Lalinský, “Algan/GaN diaphragm-based pressure sensor with direct high performance piezoelectric transduction mechanism,” Appl. Phys. Lett, Vol. 107, no. 12, pp. 122102 1–4, 2015. doi: https://doi.org/10.1063/1.4931436
- M. Mehregany, C. A. Zorman, N. Rajan, and C. H. Wu, “Silicon carbide MEMS for harsh environments,” Proc. IEEE, Vol. 86, no. 8, pp. 1594–1609, 1998. doi: https://doi.org/10.1109/5.704265
- C. S. Roper, V. Radmilovic, R. T. Howe, and R. Maboudian, “Single-source chemical vapor deposition of SiC films in a large-scale low-pressure CVD growth, chemical, and mechanical characterization reactor,” J. Electrochem. Soc., Vol. 153, no. 8, pp. C562–C566, 2006. doi: https://doi.org/10.1149/1.2208911
- J. Zhang, C. Carraro, R. T. Howe, and R. Maboudian, “Electrical, mechanical and metal contact properties of polycrystalline 3C-SiC films for MEMS in harsh environments,” Surf. Coatings Technol., Vol. 201, no. 22–23 SPEC. ISS., pp. 8893–8898, 2007. doi: https://doi.org/10.1016/j.surfcoat.2007.05.007
- A. Yamamoto, N. Nawachi, T. Tsutsumoto, and A. Terayama, “Pressure sensor using p-type polycrystalline diamond piezoresistors,” Diam. Relat. Mater, Vol. 14, no. 3–7, pp. 657–660, 2005. doi: https://doi.org/10.1016/j.diamond.2004.09.001
- A. Yamamoto, and T. Tsutsumoto, “Piezoresistive effect of CVD polycrystalline diamond films,” Diam. Relat. Mater, Vol. 13, no. 4–8, pp. 863–866, 2004. doi: https://doi.org/10.1016/j.diamond.2003.12.017
- J. L. Davidson, D. R. Wur, W. P. Kang, D. L. Kinser, and D. V. Kerns, “Polycrystalline diamond pressure microsensor,” Diam. Relat. Mater, Vol. 5, no. 1, pp. 86–92, 1996. doi: https://doi.org/10.1016/0925-9635(96)80010-0
- S. P. Timoshenko, and S. Woinowsky Krieger. Theory of plates and shells. New York: McGraw-Hill, 1959.
- P. Sagar, and S. Kal, “Modeling of micromachined piezoresistive pressure sensors,” IETE J. Res, Vol. 52, no. 1, pp. 11–16, 2006. doi: https://doi.org/10.1080/03772063.2006.11416435
- M. Bao. Analysis and design principles of MEMS devices. Amsterdam: Elsevier, 2005.
- Z. Niu, Y. Zhao, and B. Tian, “Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity.,” Rev. Sci. Instrum., Vol. 85, no. 1, pp. 15001, Jan. 2014. doi: https://doi.org/10.1063/1.4856455
- C. S. Smith, “Piezoresistance effect in germanium and silicon,” Phys. Rev, Vol. 94, no. 1, pp. 42–49, 1954. doi: https://doi.org/10.1103/PhysRev.94.42
- K. E. Petersen, “Silicon as a mechanical material,” Proc. IEEE, Vol. 70, no. 5, pp. 420–457, 1982. doi: https://doi.org/10.1109/PROC.1982.12331
- Y. Kanda, and Y. Kanda, “A graphical representation of the piezoresistance coefficients in silicon,” IEEE Trans. Electron Devices, Vol. 29, no. 1, pp. 64–70, 1982. doi: https://doi.org/10.1109/T-ED.1982.20659
- M. a. Hopcroft, W. D. Nix, and T. W. Kenny, “What is the young’s modulus of silicon?,” J. Microelectromechanical Syst., Vol. 19, no. 2, pp. 229–238, Apr. 2010. doi: https://doi.org/10.1109/JMEMS.2009.2039697
- R. Hull. Properties of crystalline silicon, no. 20. London: IET, 1999.
- K. Sato, T. Yoshioka, T. Ando, M. Shikida, and T. Kawabata, “Tensile testing of silicon film having different crystallographic orientations carried out on a silicon chip,” Sensors and Actuators A Phys, Vol. 70, no. 1–2, pp. 148–152, 1998. doi: https://doi.org/10.1016/S0924-4247(98)00125-3
- V. A. Gridchin, V. M. Lubimsky, and M. P. Sarina, “Piezoresistive properties of polysilicon films,” Sensors and Actuators A Phys., vol. 49, no. 1–2, pp. 67–72, 1995. doi: https://doi.org/10.1016/0924-4247(95)01013-Q
- W. N. Sharpe, B. Yuan, R. Vaidyanathan, and R. L. Edwards, “Measurements of Young’s modulus, Poisson’s ratio, and tensile strength of polysilicon,” in Micro Electro Mechanical Systems, 1997. MEMS’97, Proceedings, IEEE., Tenth Annual International Workshop on, 1997, pp. 424–429.
- J. Suski, V. Mosser, and J. Goss, “Polysilicon SOI pressure sensor,” Sens. Actuators, Vol. 17, no. 3–4, pp. 405–414, 1989. doi: https://doi.org/10.1016/0250-6874(89)80027-7
- V. Mosser, J. Suski, J. Goss, and E. Obermeier, “Piezoresistive pressure sensors based on polycrystalline silicon,” Sensors and Actuators A Phys, Vol. 28, no. 2, pp. 113–132, 1991. doi: https://doi.org/10.1016/0924-4247(91)85020-O
- E. Obermeier, and P. Kopystynski, “Polysilicon as a material for microsensor applications,” Sensors and Actuators A. Phys., Vol. 30, no. 1–2, pp. 149–155, 1992. doi: https://doi.org/10.1016/0924-4247(92)80210-T
- X. Liu, X. Lu, R. Chuai, C. Shi, M. Huo, and W. Chen, “Gauge Factor and Nonlinearity of P-type Polysilicon Nanofilms,” Adv. Mater. Res, Vol. 60, pp. 84–88, 2009. doi: https://doi.org/10.4028/www.scientific.net/AMR.60-61.84
- H. P. Phan, P. Tanner, D. V. Dao, L. Wang, N. T. Nguyen, Y. Zhu, and S. Dimitrijev, “Piezoresistive effect of p-type single crystalline 3C-SiC thin film,” IEEE Electron Device Lett., Vol. 35, no. 3, pp. 399–401, 2014. doi: https://doi.org/10.1109/LED.2014.2301673
- F. Xiao-An, T. Jacob, M. Mehran, and A. Z. Christian, “Doped polycrystalline 3C–SiC films with low stress for MEMS: part I. Deposition conditions and film properties,” J. Micromechanics Microengineering, Vol. 24, no. 3, pp. 35013, 2014. doi: https://doi.org/10.1088/0960-1317/24/3/035013
- P. Cong, and D. J. Young, “Single crystal 6H-SiC MEMS fabrication based on smart-cut technique,” J. Micromechanics Microeng, Vol. 15, no. 12, pp. 2243, 2005. doi: https://doi.org/10.1088/0960-1317/15/12/005
- C. Wu, C. A. Zorman, M. Mehregany, and S. Member, “Fabrication and testing of bulk micromachined silicon carbide piezoresistive pressure sensors for high temperature applications,” IEEE Sensors J., Vol. 6, no. 2, pp. 316–324, 2006. doi: https://doi.org/10.1109/JSEN.2006.870145
- A. Yamamoto, N. Norio, and T. Takahiro, “Evaluation of diamond gauge factor up to 500°C,” Diam. Relat. Mater, Vol. 16, no. 8, pp. 1670–1675, 2007. doi: https://doi.org/10.1016/j.diamond.2007.02.010
- A. Zolotukhin, P. G. Kopylov, R. R. Ismagilov, and A. N. Obraztsov, “Thermal oxidation of CVD diamond,” Diam. Relat. Mater., Vol. 19, no. 7–9, pp. 1007–1011, 2010. doi: https://doi.org/10.1016/j.diamond.2010.03.005
- C. H. Cho, R. C. Jaeger, and J. C. Suhling, “Characterization of the temperature dependence of the piezoresistive coefficients of silicon from −150°C to +125°C,” IEEE Sens. J., Vol. 8, no. 8, pp. 1455–1468, 2008. doi: https://doi.org/10.1109/JSEN.2008.923575
- V. Belwanshi, and A. Topkar, “Quantitative analysis of temperature effect on SOI piezoresistive pressure sensors,” Microsyst. Technol, Vol. 23, pp. 2719–2725, 2017. doi: https://doi.org/10.1007/s00542-016-3102-1
- J. C. Pu, S.-F. Wang, and J. C. Sung, “High-temperature oxidation behaviors of CVD diamond films,” Appl. Surf. Sci., Vol. 256, no. 3, pp. 668–673, 2009. doi: https://doi.org/10.1016/j.apsusc.2009.08.042
- P. Kulha, A. Kromka, O. Babchenko, M. Vanecek, M. Husak, O. A. Williams, and K. Haenen, “Nanocrystalline diamond piezoresistive sensor,” Vacuum, Vol. 84, no. 1, pp. 53–56, 2009. doi: https://doi.org/10.1016/j.vacuum.2009.04.023
- S. D. Janssens, S. Drijkoningen, and K. Haenen, “Ultra-thin nanocrystalline diamond membranes as pressure sensors for harsh environments,” Appl. Phys. Lett, Vol. 104, no. 7, pp. 073107 1–4, 2014. doi: https://doi.org/10.1063/1.4866028