Coefficient Reduction Method for Stopband Ripple Minimization of IFIR Filter

References

• S. K. Mitra, and K. Yonghong, Digital signal Processing: A Computer-based Approach. New York: McGraw-Hill, 2006.
   Google Scholar
• J. G. Proakis, and D. G. Manolaki, Introduction to Digital Signal Processing. Upper Saddle River, NJ: Prentice Hall Professional Technical Reference, 1988.
   Google Scholar
• Y. Neuvo, D. Cheng-Yu, and S. K. Mitra, “Interpolated finite impulse response filters,” IEEE Trans. Acoust. Speech Signal Process., Vol. 32, no. 3, pp. 563–70, 1984. doi: 10.1109/TASSP.1984.1164348
   Google Scholar
• A. K. Dwivedi, S. Ghosh, and N. D. Londhe, “Low-power FIR filter design using hybrid artificial bee colony algorithm with experimental validation over FPGA,” Circuits Syst. Signal Process., Vol. 36, no. 1, pp. 156–80, 2017. doi: 10.1007/s00034-016-0297-4
   Web of Science ®Google Scholar
• P. P. Vaidyanathan, “Optimal design of linear phase FIR digital filters with very flat passbands and equiripple stopbands,” IEEE Trans. Circuits Syst., Vol. 32, no. 9, pp. 904–17, 1985. doi: 10.1109/TCS.1985.1085814
   Google Scholar
• T. Saramaki, T. Neuvo, and S. K. Mitra, “Design of computationally efficient interpolated FIR filters,” IEEE Trans. Circuits Syst., Vol. 35, no. 1, pp. 70–88, 1988. doi: 10.1109/31.1701
   Google Scholar
• S. C. Powell, and P. M. Chau, “Efficient narrowband FIR and IFIR filters based on powers-of-two sigma-delta coefficient truncation,” IEEE Trans. Circuits Syst. II Analog Digit. Signal Process., Vol. 41, no. 8, pp. 497–505, 1994. doi: 10.1109/82.318938
   Google Scholar
• Y. Lian, L. Zhang, and C. C. Ko, “An improved frequency response masking approach for designing sharp FIR filters,” Signal. Processing., Vol. 81, no. 12, pp. 2573–81, 2001. doi: 10.1016/S0165-1684(01)00149-9
   Google Scholar
• E. L. Batista, O. J. Tobias, and R. Seara. “A fully adaptive IFIR filter with removed border effect,” in IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), Las Vegas, NV, 2008.
   Google Scholar
• G. G. Jovanovic-Dolecek, and A. Fernandez-Vazquez, “Novel droop-compensated comb decimation filter with improved alias rejections,” AEU Int. J. Electron. Commun., Vol. 67, no. 5, pp. 387–96, 2013. doi: 10.1016/j.aeue.2012.10.010
   Google Scholar
• I. Singh, and P. Mehta, “Joint optimization of interpolated FIR filter,” Int. J. Eng., Vol. 2, no. 1, pp. 1–4, 2013.
   Google Scholar
• A. Ayyagari, J. J. Hanrahan, M. C. Reddy, and P. V. Sankar, “Interpolating cubic spline filter and method,” U.S. Patent, 7, 2011.
   Google Scholar
• L. Wu-Sheng, and T. Hinamoto, “A unified approach to the design of interpolated and frequency-response-masking FIR filters,” IEEE Trans. Circuits Syst. Regul. Pap., Vol. 63, no. 12, pp. 2257–66, 2016. doi: 10.1109/TCSI.2016.2613880
   Google Scholar
• L. Richard, “Interpolated narrowband lowpass FIR filters,” IEEE Signal Process Mag., Vol. 20, no. 1, pp. 50–7, 2003. doi: 10.1109/MSP.2003.1166628
   Google Scholar
• A. Mehrnia, and A. N. Willson, “An optimal IFIR filter design,” IEEE Int. Symp. Circuits Syst., Vol. 3, pp. 2573–81, 2004.
   Google Scholar
• X. Huang, S. Jing, Z. Wang, Y. Xu, and Y. Zheng, “Closed-form FIR filter design based on convolution window spectrum interpolation,” IEEE Trans. Signal Process., Vol. 64, no. 5, pp. 1173–86, 2016.
   Web of Science ®Google Scholar
• A. Mehrnia, and A. N. Willson, “Optimally factored IFIR filters,” Circuits Syst. Signal Process., Vol. 38, no. 1, pp. 259–86, 2019. doi: 10.1007/s00034-018-0857-x
   Google Scholar
• A. Mehrnia, and A. N. Willson, “A lower bound for the hardware complexity of FIR filters,” IEEE Circuits Syst. Mag., Vol. 18, no. 1, pp. 10–28, 2018. doi: 10.1109/MCAS.2017.2785422
   Google Scholar
• A. Mehrnia, and A. N. Willson, “FIR filter design using optimal factoring: a walkthrough and summary of benefits,” IEEE Circuits Syst. Mag., Vol. 16, no. 1, pp. 8–21, 2016. doi: 10.1109/MCAS.2015.2510178
   Google Scholar
• A. Mehrnia, and A. N. Willson, “Optimal factoring of FIR filters,” IEEE Trans. Signal Process., Vol. 63, no. 3, pp. 647–61, 2015. doi: 10.1109/TSP.2014.2379647
   Google Scholar
• S. Chandra. “A new IFIR technique for designing digital filter and filter bank,” Thesis, PDPM IIIT DM, Jabalpur, 2014.
   Google Scholar
• W. Chen, M. Huang, and L. Xin. , “Sparse FIR filter design based on interpolation technique,” in IEEE 23rd International Conference on Digital Signal Processing (DSP), Shanghai, China, 2018.
   Google Scholar
• R. Indrakanti, and E. Elizabeth. “A low complexity reconfigurable IFIR filter for software defined radio channelizers,” in Proceedings of the 2nd International Conference on Vision, Image and Signal Processing, Las Vegas, NV, USA, ACM, 2018.
   Google Scholar
• M. G. C. Jiménez, E. David, R. Troncoso, and J. D. Gordana. “An efficient design of baseband filter for mobile communications,” in 2016 IEEE International Conference on Electro Information Technology (EIT), Grand Forks, ND, 2016.
   Google Scholar
• G. Capizzi, S. Coco, G. L. Sciuto, and C. Napoli, “A new iterative FIR filter design approach uses a Gaussian approximation,” IEEE Signal Process. Lett., Vol. 25, pp. 1615–9, 2018. doi: 10.1109/LSP.2018.2866926
   Web of Science ®Google Scholar
• M. Chen, and J. Tuqan. “High-Performance Low-Cost DFE using IFIR Filters,” in IEEE International Conference on Signals, Systems and Computers (ACSSC 2007), Pacific Grove, CA, 2007.
   Google Scholar
• D. Lamare, C. Rodrigo, and R. Sampaio-Neto, “Adaptive interference suppression for CDMA systems using interpolated FIR filters with adaptive interpolators in multipath channels,” IEEE Trans. Veh. Technol., pp. 1–16, 2013.
   Google Scholar
• O. J. Coleman, “Nonseparable Nth-band filters as overlapping-subarray tapers,” in IEEE International Conference on Redolence (RADAR), Kansas City, MO, 2011, pp. 141–6.
   Google Scholar
• S. Sharma, S. Kulkarni, V. Pujari, P. R. Lakshminarsimhan, and R. Seshaiah, “High data rate filter design for satellite communication,” in IEEE International Conference on Recent Advances in Space Technologies, Istanbul, 2007, pp. 546–50.
   Google Scholar
• H. P. Singh, “Evaluating the perceived voice quality on VoIP network using interpolated FIR filter algorithm,” Int. J. Electron., Vol. 99, no. 10, pp. 1449–69, 2012. doi: 10.1080/00207217.2012.669722
   Web of Science ®Google Scholar
• Y. T. Kuo, “Design and implementation of low-power ANSI S1. 11 filter bank for digital hearing aids,” IEEE Trans. Circuits Syst. Regul. Pap., Vol. 57, no. 7, pp. 1684–96, 2010. doi: 10.1109/TCSI.2009.2033539
   Google Scholar
• J. V. Ogale, and A. Jain, “Cosine modulated non-uniform filter bank with improved computational efficiency,” International J. Image Graph. Signal Process. (IJIGSP), Vol. 4, no. 2, pp. 1–18, 2012. doi: 10.5815/ijigsp.2012.02.01
   Google Scholar
• S. S. Kaur, S. M. Saini, and Palvee, “Optimal interpolated FIR (IFIR) digital filter design with spectral estimation for radar and sonar system,” IJERA ISSN, Vol. 3, no. 2, pp. 866–71, 2013.
   Google Scholar
• J. Hanrahan, “Direct RF digital transceiver and method,” U.S. Patent, 8, 2012.
   Google Scholar
• S. Chandra, and A. Sharma, “A computationally efficient approach for ECG signal denoising and data compression,” in Proceedings of IEEE Control and System Graduate Research Colloquium, Vol. 8, Shah Alam, Malaysia, 2017, pp. 22–8.
   Google Scholar
• O. Wing. “Filter design.” in Classical Circuit Theory, 2009, Springer, pp. 1–50.
   Google Scholar
• N. Aikawa, and M. Sato, “Designing linear phase FIR digital filters with flat passband and equiripple stopband characteristics,” Electron. Commun. Jpn (Part III: Fundamental Electronic Science), Vol. 86, no. 4, pp. 89–95, 2003. doi: 10.1002/ecjc.1148
   Google Scholar
• C. Chang, and C. Yang, “A novel broad-band Chebyshev-response rat-race ring coupler,” IEEE Trans. Microwave Theory Tech., Vol. 47, no. 4, pp. 455–62, 1999. doi: 10.1109/22.754879
   Google Scholar
• I. W. Selesnick, and C. S. Burrus, “Exchange algorithms for the design of linear phase FIR filters and differentiators having flat monotonic passbands and equiripple stopbands,” IEEE Trans. Circuits Syst. II Analog Digit. Signal Process., Vol. 43, no. 9, pp. 671–5, 1996. doi: 10.1109/82.536764
   Google Scholar
• G. P. Agrawal. Fiber-optic communication systems, Vol. 222. New York: John Wiley & Sons, 2012.
   Google Scholar
• H. Jingyu, K. Wankun, W. Jiangang, H. Chaogen, and Y. Xiaohu, “Design nearly equiripple FIR filter by gradient scheme with dynamic step size,” Int. J. Circuit Theory Appl., Vol. 43, no. 2, pp. 174–86, 2015. doi: 10.1002/cta.1931
   Google Scholar
• Y. C. Lim, J. H. Lee, and C. K. Chen, “A weighted least squares algorithm for quasi-equiripple FIR and IIR digital filter design,” IEEE Trans. Signal Process., Vol. 40, no. 3, pp. 551–8, 1992. doi: 10.1109/78.120798
   Google Scholar
• S. Chandra. “A new IFIR technique for designing digital filter and filter bank”, M.Tech thesis, IIIT Jabalpur, 2014.
   Google Scholar
• A. L. Goldberger, et al., “Physiobank, PhysioToolkit, and PhysioNet: Components of a New research Resource for Complex Physiologic signals,” Circulation, Vol. 101, no. 23, pp. 215–20, 2000. doi: 10.1161/01.CIR.101.23.e215
   PubMed Web of Science ®Google Scholar