https://orcid.org/0000-0001-5173-4563
References
- M. Zhou, Y. Feng, X. Yu, and F. Han, “ Gain margin technique based continuous sliding-mode control of induction motors,” in IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2017.
- D. Karagiannis and A. Astolfi, “Nonlinear adaptive control of systems in feedback form: an alternative to adaptive backstepping,” Syst. Control. Lett., Vol. 57, no. 9, pp. 733–9, 2008. doi: 10.1016/j.sysconle.2008.02.006
- A. Astolfi and R. Ortega, “Immersion and invariance: a new tool for stabilization and adaptive control of nonlinear systems,” IEEE Trans. Autom. Control, Vol. 48, no. 4, pp. 590–606, 2003. doi: 10.1109/TAC.2003.809820
- G. Tagne, R. Talj, and A. Charara. “Immersion and invariance vs sliding mode control for reference trajectory tracking of autonomous vehicles,” in Control Conference (ECC), 2014, pp. 2888–93.
- B. Zhao, B. Xian, Y. Zhang, and X. Zhang, “Nonlinear robust adaptive tracking control of a quadrotor UAV via immersion and invariance methodology,” IEEE Trans. Ind. Electron., Vol. 62, no. 5, pp. 2891–902, 2015. doi: 10.1109/TIE.2014.2364982
- D. Bustan, S. K. H. Sani, and N. Pariz, “Retracted article: immersion and invariance based fault tolerant adaptive spacecraft attitude control,” International Journal of Control, Automation and Systems, Vol. 12, no. 2, pp. 333–9, 2014. doi: 10.1007/s12555-012-0536-9
- T. Yang et al., “Adaptive robust motion control of uncertain manipulators through immersion and invariance adaptive visual servoing,” in 2016 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), 2016, pp. 590–5.
- E. Hristea and H. Siguerdidjane, “Stabilization of a magnetic suspension by immersion and invariance and experimental robustness study,” IFAC Proceedings Volumes, Vol. 44, no. 1, pp. 7210–15, 2011. doi: 10.3182/20110828-6-IT-1002.02887
- T. Wimb, C. Ott, and G. Hirzinger, “Immersion and invariance control for an antagonistic joint with nonlinear mechanical stiffness,” in 2010 49th IEEE Conference on Decision and Control (CDC), 2010, pp. 1128–35.
- G. Tagne, R. Talj, and A. Charara, “Design and validation of a robust immersion and invariance controller for the lateral dynamics of intelligent vehicles,” Control. Eng. Pract., Vol. 40, pp. 81–92, 2015. doi: 10.1016/j.conengprac.2015.03.002
- H. Olsson, K. J. Åström, C. Canudas de Wit, M. Gäfvert, and P. Lischinsky, “Friction models and friction compensation,” Eur. J. Control, Vol. 4, no. 3, pp. 176–95, 1998. doi: 10.1016/S0947-3580(98)70113-X
- P. Vas. Vector Control of AC Machines. Vol. 22, New York: Oxford University Press, 1990.
- C. Chan and H. Wang, “An effective method for rotor resistance identification for high-performance induction motor vector control,” IEEE Trans. Ind. Electron., Vol. 37, no. 6, pp. 477–82, 1990. doi: 10.1109/41.103451
- A. Fekih, “Effective fault tolerant control design for nonlinear systems: application to a class of motor control system,” IET Control Theory Applic., Vol. 2, no. 9, pp. 762–72, 2008. doi: 10.1049/iet-cta:20070090
- A. Mohammadzadeh, S. Ghaemi, O. Kaynak, and S. Khanmohammadi, “Observer-based method for synchronization of uncertain fractional order chaotic systems by the use of a general type-2 fuzzy system,” Appl. Soft. Comput., Vol. 49, pp. 544–60, 2016. doi: 10.1016/j.asoc.2016.08.016