106
Views
2
CrossRef citations to date
0
Altmetric
Articles

HDL Coder-based FPGA Implementation of a Continuous-Discrete Time Observer for Sensorless Induction Machine

, &

References

  • J. Holtz, “Sensorless control of induction machines–with or without signal injection?,” IEEE Trans. Ind. Electron., Vol. 53, no. 1, pp. 7–30, Feb. 2006. DOI: 10.1109/TIE.2005.862324.
  • E. Zerdali and M. Barut, “The comparisons of optimized extended Kalman filters for speed-sensorless control of induction motors,” IEEE Trans. Ind. Electron., Vol. 64, pp. 4340–51, Jun. 2017. DOI: 10.1109/TIE.2017.2674579.
  • R. Inan and M. Barut, “Speed-sensorless direct vector control of induction motor with the EKF based stator resistance estimation on FPGA,” IEEE Optim. Conf. Proc., pp. 343–7, Sep. 2015. DOI: 10.1109/OPTIM.2015.7427001.
  • M. Ghanes and G. Zheng, “On sensorless induction motor drives: Sliding-mode observer and output feedback controller injection,” IEEE Trans. Ind. Electron., Vol. 56, no. 9, pp. 3404–13, Sep. 2009. doi: 10.1109/TIE.2009.2026387
  • Z. Yang, L. Wan, X. Sun, L. Chen, and Z. Chen, “Sliding mode control for bearingless induction motor based on a novel load torque observer,” J. Sensor, 2016, pp. 1–10, Sep. 2016. DOI: 10.1155/2016/8567429.
  • R. Kumar, S. Das, and A. K. Chattopadhyay, “Comparative assessment of two different MRAS schemes for speed-sensorless control of induction motor drives,” IET Electr. Power Appl., Vol. 10, pp. 141–54, Feb. 2016. DOI: 10.1049/iet-epa.2015.0121.
  • R. Trabelsi, A. Kheder, M. Faouzi Mimouni, and F. M'sahli, “An Adaptive Backstepping Observer for on-line rotor resistance adaptation,” Int. J. Sci. Tech. Automat. Control Comput. Eng., Vol. 4, no. 1, pp. 1246–67, Jul. 2010.
  • M. Ghanes, J. De Leon, and A. Glumineau, “Observability study and observer-based interconnected form for sensorless induction motor,” in Proceedings of the 45th IEEE Conference on Decision and Control, San Diego, CA, USA, Dec. 2006, pp. 1240–1245.
  • C. Dufour, S. Cense, and J. Belanger, “An induction machine and power electronic test system on a FPGA,” Math. Comput. Simul., Vol. 130, pp. 112–23, Dec. 2016. doi: 10.1016/j.matcom.2016.03.014
  • A. Venkadesan, S. Himavathi, K. Sedhuraman, and A. Muthuramalingam, “Design and FPGA implementation of cascade neural network based flux estimator for speed estimation in induction motor drives,” IET Elec. Power Appl., Vol. 11, no. 1, pp. 121–31, Jan. 2017. doi: 10.1049/iet-epa.2016.0550
  • R. Troncoso, et al., FPGA-based online detection of multiple combined faults in induction motors through information entropy and fuzzy inference,” IEEE Trans. Ind. Inf., Vol. 58, no. 11, pp. 5263–70, Mar. 2011. doi: 10.1109/TIE.2011.2123858
  • Z. Ma, J. Gao, and R. Kennel, “FPGA implementation of a hybrid sensorless control of SMPMSM in the whole speed range,” IEEE Trans. Ind. Elect., Vol. 9, no. 3, pp. 1253–61, Aug. 2013.
  • S. Gdaim, A. Mtibaa, and M. F. Mimouni, “Design and experimental implementation of DTC of an induction machine based on fuzzy logic control on FPGA,” IEEE Trans. Fuzz Syst., Vol. 23, no. 3, pp. 644–55, Jun. 2015. doi: 10.1109/TFUZZ.2014.2321612
  • M. Nadri, H. Hammouri, and R. Grajales, “Observer design for uniformly observable systems with sampled measurements,” IEEE Trans. Automat. Control, Vol. 58, no. 3, pp. 757–62, Mar. 2013. doi: 10.1109/TAC.2012.2212517
  • T. Ahmed-Ali, V. V. Assche, J.-F. Massieu, and P. Dorleans, “Continuous-discrete observer for state affine systems with sampled and delayed measurements,” IEEE Trans. Automat. Control, Vol. 58, no. 4, pp. 1085–91, Apr. 2013. doi: 10.1109/TAC.2012.2225555
  • M. Farza, M. M'Saad, M. L. Fall, E. Pigeon, O. Gehan, and K. Busawon, “Continuous-discrete time observers for a class of MIMO nonlinear systems,” IEEE Trans. Automat. Control, Vol. 59, no. 4, pp. 1060–5.Apr. 2014. doi: 10.1109/TAC.2013.2283754
  • I. Bouraoui, M. Farza, T. Menard, R. Ben Abdennour, M. M'Saad, and H. Mosrati, “Observer design for a class of uncertain nonlinear systems with sampled outputs–Application to the estimation of kinetic rates in bioreactors,” Automatica, Vol. 55, pp. 78–87, May 2015. doi: 10.1016/j.automatica.2015.02.036
  • Y. P. Siwakoti and G. E. Town, “Desing of FPGA-controlled power electronics and drives using MATLAB simulink,” in IEEE ECCE-Asia Proceedings, Melbourne, Australia, Jun. 2013, pp. 571–7.
  • M. Besbes, S. H. Saïd, and F. M'Sahli, “On FPGA implementation of a continuous-discrete time observer for sensorless induction machine using simulink HDL coder,” Int. J. Adv. Comput. Sci. Appl., Vol. 8, no. 6, pp. 412–7, Sep. 2017. DOI: 10.14569/IJACSA.2017.080655.
  • M. Besbes, S. H. Saïd, and F. M'Sahli, “FPGA implementation of high gain observer for induction machine using simulink HDL coder,” IEEE CEIT Proceedings, May 2015. DOI: 10.1109/CEIT.2015.7233064.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.