135
Views
6
CrossRef citations to date
0
Altmetric
Articles

CSRR Embedded CPW Band-Stop Filter

, &

References

  • H. Bell, “L-resonator bandstop filters,” IEEE Trans. Microw. Theory Techn., Vol. 44, pp. 2669–72, 1996. doi: 10.1109/22.554623
  • W.-H. Tu, and K. Chang, “Compact second harmonic-suppressed bandstop and bandpass filters using open stubs,” IEEE Trans. Microw. Theory Techn, Vol. 54, pp. 2497–502, 2006. doi: 10.1109/TMTT.2006.882896
  • E. J. Naglich, J. Lee, D. Peroulis, and W. J. Chappell. “High-Q tunable bandstop filters with adaptable bandwidth and pole allocation,” in 2011 IEEE MTT-S International Microwave Symposium, Baltimore, MD, 2011, pp. 1–1.
  • H.-J. Chen, et al., “A novel cross-shape DGS applied to design ultra-wide stopband low-pass filters,” IEEE Microwave Compon. Lett., Vol. 16, pp. 252–4, 2006. doi: 10.1109/LMWC.2006.873594
  • J. Yang, and W. Wu, “Compact elliptic-function low-pass filter using defected ground structure,” IEEE Microwave Compon. Lett., Vol. 18, pp. 578–80, 2008. doi: 10.1109/LMWC.2008.2002447
  • S. Y. Huang, and Y. H. Lee, “Compact U-shaped dual planar EBG microstrip low-pass filter,” IEEE Trans. Microwave Theory Tech., Vol. 53, pp. 3799–805, 2005. doi: 10.1109/TMTT.2005.859865
  • L.-H. Hsieh, and K. Chang, “Compact elliptic-function low-pass filters using microstrip stepped-impedance hairpin resonators,” IEEE Trans. Microwave Theory Tech., Vol. 51, pp. 193–9, 2003. doi: 10.1109/TMTT.2002.806901
  • H. Liu, R. H. Knoechel, and K. F. Schuenemann, “Miniaturized bandstop filter using meander spurline and capacitively loaded stubsm,” ETRI J, Vol. 29, no. 5, pp. 614–8, 2007. doi: 10.4218/etrij.07.0107.0077
  • M. Chongcheawchamnan, M. F. Shafique, and I. D. Robertson, “Miniaturisation and electronic tuning techniques for microstripspurline filters,” IET Microw. Antennas Propag., Vol. 5, no. 1, pp. 1–9, 2011. doi: 10.1049/iet-map.2010.0019
  • A. Kumbhat, A. Basu and S.K. Koul, “A new compact symmetric narrow-band bandstop filter for CPW lines,” in Proceedings of Asia Pacific Microwave Conference, New Delhi, December 15–18, 2004.
  • R. N. Simons, Coplanar Waveguide Circuits, Components, and Systems. New York: Wiley-IEEE Press, 2002.
  • J. Garcia-Garcia, F. Martin, F. Falcone, J. Bonache, J. D. Baena, and I. Gil, “Microwave filters with improved stopband based on sub-wavelength resonators,” IEEE. Trans. Microw. Theory. Tech., Vol. 53, pp. 1997–2005, 2005. doi: 10.1109/TMTT.2005.848828
  • Wu, B., B. Li, and C. Liang, “Design of lowpass filter using a novel split-ring resonator defected ground structure,” Microw. Opt. Technol. Lett., Vol. 49, pp. 288–91, 2007. doi: 10.1002/mop.22111
  • V. Öznazı, and V. B. Ertürk, “A comparative investigation of SRR- and CSRR-based band-reject filters: Simulations, experiments, and discussions,” Microw. Opt. Technol. Lett, Vol. 50, pp. 519–23, 2008. doi: 10.1002/mop.23119
  • X. Hu, Q. Zhang, and S. He, “Dual-band-rejection filter based on split ring resonator (SRR) and complimentary SRR,” Microw. Opt. Technol. Lett, Vol. 51, pp. 2519–22, 2009. doi: 10.1002/mop.24596
  • J. Garcia-Garcia, et al., “Microwave filters with improved stopband based on sub-wavelength resonators,” IEEE Trans. Microwave Theory Tech., Vol. 53, pp. 1997–2006, 2005. doi: 10.1109/TMTT.2005.848828
  • H.-W. Wu, Y.-K. Su, M.-H. Weng, and C.-Y. Hung, “A compact narrow-band microstrip bandpass filter with a complementary split-ring resonator,” Microw. Opt. Technol. Lett, Vol. 48, pp. 2103–6, 2006. doi: 10.1002/mop.21865
  • S.-H. Fu, and C.-M. Tong, “A novel CSRR-based defected ground structure with dual-bandgap characteristics,” Microw. Opt. Technol. Lett, Vol. 51, pp. 2908–10, 2009. doi: 10.1002/mop.24776
  • T. Lam, R. B. Greegor, C. G. Parazzoli, and M. H. Tanielian, “Compact waveguide bandpass and bandstop filters using negative index material concepts,” Microw. Opt. Technol. Lett, Vol. 52, pp. 2336–9, 2010. doi: 10.1002/mop.25482
  • C. Saha, J. Y. Siddiqui, L. A. Shaik, and Y. M. M. Antar, “Rotational circular split ring resonator array loaded CPW for dual notch and wide bandstop applications,” Microw. Opt. Technol. Lett, Vol. 57, pp. 1204–9, 2015. doi: 10.1002/mop.29049
  • M. Gil, J. Bonache, and F. Martin, “Synthesis and applications of new left handed microstrip lines with complementary split-ring resonators etched on the signal strip,” IET Microw. Antennas Propag., Vol. 2, no. 4, pp. 324–30, June 2008. doi: 10.1049/iet-map:20070225
  • J.-C. Liu, H.-C. Lin, and B.-H. Zeng, “Complementary split ring resonators with dual mesh-shaped couplings and defected ground structures for wide pass-band and stop-band BPF design,” Progress in Electromagnetics Res. Lett., Vol. 10, pp. 19–28, 2009. doi: 10.2528/PIERL09060402
  • A. L. Borja, J. Carbonell, V. E. Boria, J. Cascon, and D. Lippens, “A 2% bandwidth C-band filter using cascaded splitring resonators,” IEEE. Antenn. Wirel. Pr, Vol. 9, pp. 256–9, 2010. doi: 10.1109/LAWP.2010.2046711
  • B. Pradhan, and B. Gupta, “A miniaturized band-reject filter using metamaterial structures on silicon substrate for X-band application,” IETE. J. Res. 2018. DOI:10.1080/03772063.2018.1540948.
  • CST Microwave Studio Suit, @ 2019 CST: Computer Simulation Technology, AG.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.