Ultra-Low Power 0.55 mW 2.4 GHz CMOS Low-Noise Amplifier for Wireless Sensor Network

References

• B. Zhao, and H. Yang, Design of Radio-Frequency Transceivers for Wireless Sensor Networks. Proc. Wireless Sensor Networks: Application-Centric Design, InTech, 2010.
   Google Scholar
• T. Sasilathaa, and J. Rajab, “A 1 V, 2.4 GHz low power CMOS common source LNA for WSN applications,” Int. J. of Electron. Commun., Vol. 64, no. 10, pp. 940–6, 2010. doi: 10.1016/j.aeue.2009.07.009
   Google Scholar
• S. Murad, R. Ismail, M. Isa, M. Ahamd, and W. Han. “High gain 2.4 GHz CMOS low noise amplifier for wireless sensor network applications,” in Proc. IEEE International RF and Microwave Conference (RFM2013), pp. 39–41, Penang, Malaysia, December 9–11, 2013.
   Google Scholar
• S. Sattar, and T. Z. A. Zulkifli, “A 2.4/5.2-GHz concurrent dual-band CMOS low noise amplifier,” IEEE. Access., Vol. 5, pp. 21148–56, 2017. doi: 10.1109/ACCESS.2017.2756985
   Web of Science ®Google Scholar
• Z. Meng, and L. Zhiqun, “Design of low power common-gate low noise amplifier for 2.4 GHz wireless sensor network applications,” J. Semicon, Vol. 33, no. 10, pp. 1–7, 2012.
   Google Scholar
• A. Azizan, S. A. Z. Murad, R. C. Ismail, and M. N. M. Yasin. “A review of LNA topologies for wireless applications,” in Proc. 2nd International Conference on Electronic Design, pp. 375–79, Penang, Malaysia, August 19–21, 2014.
   Google Scholar
• J. Wu, Y. Lin, and Y. Tsai. “A sub-mW CMOS LNA for WSN applications,” in Proc. Asia-Pacific Microwave Conference Proceedings (APMC), pp. 899–901, Kaohsiung, Taiwan, December 4–7, 2012.
   Google Scholar
• A. Dehqan, E. Kargaran, K. Mafinezhad, and H. Nabovati. “An ultra low voltage ultra low power CMOS UWB LNA using forward body biasing,” in Proc. IEEE 55th International Midwest Symposium on Circuits and Systems (MWSCAS), vol. 1, pp. 266–9, Boise, ID, USA, August 5–8, 2012.
   Google Scholar
• A. Azizan, and S. Murad, “A 0.3 mW 2.4 GHz low power low noise amplifier using forward body bias technique for wireless sensor,” J. Teknologi, Vol. 78, no. 1, pp. 31–37, 2016.
   Web of Science ®Google Scholar
• J. Sobhi, and Z. D. Koozehkanani, “A sub-mW 2.9-dB noise figure inductor-less low noise amplifier for wireless sensor network applications,” AEU-Int J. Electron. Commun., Vol. 93, pp. 132–9, 2018. doi: 10.1016/j.aeue.2018.06.013
   Web of Science ®Google Scholar
• H. Rastegar, and A. Hakimi, “A high linearity CMOS low noise amplifier for 3.66 GHz applications using current-reused topology,” Microe. J, Vol. 44, no. 4, pp. 301–6, 2013. doi: 10.1016/j.mejo.2013.01.013
   Web of Science ®Google Scholar
• A. Zafarian, I. K. Fard, A. Golmakani, and J. Shirazi. “A 0.4 V 790μw CMOS low noise amplifier in sub-threshold region at 1.5 GHz,” in Proc. 2013 8th International IEEE Design and Test Symposium (IDT), pp. 1–6, Marrakesh, Morocco, December 16–18, 2013.
   Google Scholar
• R. Dai, Y. Zheng, J. He, G. Liu, W. Kong, and S. Zou, “A 0.5-V novel complementary current-reused CMOS LNA for 2.4 GHz medical application,” Microe. J, Vol. 55, pp. 64–69, 2016. doi: 10.1016/j.mejo.2016.06.011
   Web of Science ®Google Scholar
• R. Jafarnejad, A. Jannesari, A. Nabavi, and A. Sahafi, “A low power low noise amplifier employing negative feedback and current reuse techniques,” Microe. J, Vol. 49, pp. 49–56, 2016. doi: 10.1016/j.mejo.2015.12.011
   Web of Science ®Google Scholar
• A. Karimlou, R. Jafarnejad, and J. Sobhi, “An inductor-less sub-mW low noise amplifier for wireless sensor network applications,” Integration, VLSI J, Vol. 52, pp. 316–22, 2016. doi: 10.1016/j.vlsi.2015.07.009
   Web of Science ®Google Scholar
• E. Kargaran, D. Manstretta, and R. Castello. “A 30μW, 3.3 dB NF CMOS LNA for wearable WSN applications,” in Proc. 2017 IEEE International Symposium on Circuits and Systems (ISCAS), pp. 1–4, Baltimore, USA, May 28–31, 2017.
   Google Scholar
• H. Alsuraisry, S.-C. Hsiao, Y.-H. Lin, P.-Y. Li, J.-H. Tsai, and T.-W. Huang. “A review of microwatt low-noise amplifier for microwave and millimeter-wave IoT applications.” in Proc. IEEE International Symposium on Radio-Frequency Integration Technology (RFIT), pp. 71–73, Seoul, Korea, August 30–September 1, 2017.
   Google Scholar
• H.-J. Liu, and Z.-F. Zhang, “An ultra-low power CMOS LNA for WPAN applications,” IEEE Micro. Wirel. Comp. Lett, Vol. 27, no. 2, pp. 174–6, 2017. doi: 10.1109/LMWC.2016.2647382
   Web of Science ®Google Scholar
• M. Rahman, and R. Harjani, “A 2.4-GHz, Sub-1-V, 2.8-dB, NF, 475-µW dual-path noise and nonlinearty cancelling LNA for ultra-low-power radios,” IEEE J. Solid-State Circuits, Vol. 53, no. 5, pp. 1423–30, 2018. doi: 10.1109/JSSC.2017.2786736
   Web of Science ®Google Scholar
• M. Babasafari, and M. Yargholi, “A low power CMOS UWB LNA with dual-band notch filter using forward body biasing,” Article Press, IETE J Res, 1–12, 2018.
   Google Scholar
• Z. Li, Z. Wang, M. Zhang, L. Chen, C. Wu, and Z. Wang, “A 2.4 GHz ultra-low-power current-reuse CG-LNA with active GM-boosting technique,” IEEE Micro. and Wirel. Comp. Lett, Vol. 24, pp. 348–50, 2014. doi: 10.1109/LMWC.2014.2309091
   Web of Science ®Google Scholar
• Y. M. Kim, H. Han, and T. W. Kim, “A 0. 6-V + 4 dBm IIP3 LC folded cascode CMOS LNA with GM linearization,” IEEE Trans. on Circuit and Systems II: Express Briefs, Vol. 60, no. 3, pp. 122–6, 2013.
   Web of Science ®Google Scholar
• M. Muhamad, N. Soin, H. Ramiah, N. M. Noh, and C. W. Keat. “A 0.13 µm inductively degenerated cascode CMOS LNA at 2.14 GHz,” in Proc. IEEE Symposium on Industrial Electronics and Applications (ISIEA), 2011, pp. 120–3.
   Google Scholar
• C. Chieh Pin, C. Ja-Hao, and W. Yeong Her, “A fully integrated 5 GHz low voltage LNA using forward body bias technology,” IEEE IEEE Micro. and Wirel. Comp. Lett, Vol. 19, pp. 176–8, 2009. doi: 10.1109/LMWC.2009.2013745
   Web of Science ®Google Scholar