A Novel High Voltage Gain SEPIC Converter Based on Hybrid Split-Inductor for Renewable Application

References

• L. Dang, N. Bernard, N. Bracikowski, and G. Berthiau, “Design optimization with flux weakening of high-speed PMSM for electrical vehicle considering the driving cycle,” IEEE Trans Ind. Electron, Vol. 64, no. 12, pp. 9834–43, Dec. 2017. DOI: 10.1109/TIE.2017.2726962.
   Web of Science ®Google Scholar
• M. Pakdel, A. Taheri, and S. Jalilzadeh, “A novel soft switching DC–DC boost converter with higher efficiency,” IETE. J. Res., 1–10, Jan. 2019. DOI: 10.1080/03772063.2019.1565949.
   Web of Science ®Google Scholar
• W. Li, and X. He, “Review of non-isolated high-step-up DC–DC converters in photovoltaic grid-connected applications,” IEEE Trans. Ind. Electron, Vol. 58, no. 4, pp. 1239–50, Apr. 2011. DOI: 10.1109/TIE.2010.2049715.
   Web of Science ®Google Scholar
• Z. Zhang, O. C. Thomsen, M. A. Andersen, and H. R. Nielsen, “Dual-input isolated full-bridge boost DC–DC converter based on the distributed transformers,” IET Power Electron., Vol. 5, no. 7, pp. 1074–83, Aug. 2012. DOI: 10.1049/iet-pel.2011.0181.
   Web of Science ®Google Scholar
• P. Akter, M. Uddin, S. Mekhilef, N. M. L. Tan, and H. Akagi, “Model predictive control of bidirectional isolated DC–DC converter for energy conversion system,” Int. J. Electron., Vol. 102, no. 8, pp. 1407–27, Aug. 2015. DOI: 10.1080/00207217.2015.1028479.
   Web of Science ®Google Scholar
• S. A. Gorji, M. Ektesabi, and J. Zheng, “Isolated switched-boost push–pull DC–DC converter for step-up applications,” Electron. Lett., Vol. 53, no. 3, pp. 177–9, Jan. 2017. DOI: 10.1049/el.2016.4151.
   Web of Science ®Google Scholar
• E. Ragonese, N. Spina, A. Castorina, P. Lombardo, N. Greco, A. Parisi, and G. Palmisano, “A fully integrated galvanically isolated DC–DC converter with data communication,” IEEE Trans. Circuits and Systems I: Regular Papers, Vol. 65, no. 4, pp. 1432–41, Apr. 2018. DOI: 10.1109/TCSI.2017.2742021.
   Web of Science ®Google Scholar
• K. H. Chao, and Y. C. Jheng, “A soft-switching coupled inductor bidirectional DC–DC converter with high-conversion ratio,” Int. J. Electron., Vol. 105, no. 1, pp. 164–90, Jan. 2018. DOI: 10.1080/00207217.2017.1355022.
   Web of Science ®Google Scholar
• H. Wen, B. Su, and W. Xiao, “Design and performance evaluation of a bidirectional isolated DC–DC converter with extended dual-phase shift scheme,” IET Power Electron., Vol. 6, no. 5, pp. 914–24, May 2013. DOI: 10.1049/iet-pel.2012.0545.
   Web of Science ®Google Scholar
• N. Mukherjee, and D. Strickland, “Control of cascaded dc–dc converter-based hybrid battery energy storage systems—part II: Lyapunov approach,” IEEE Trans. Ind. Electron, Vol. 63, no. 5, pp. 3050–59, May 2016. DOI: 10.1109/TIE.2015.2511159.
   Web of Science ®Google Scholar
• Y. Jiao, F. L. Luo, and M. Zhu, “Generalised modelling and sliding mode control for n-cell cascade super-lift DC–DC converters,” IET Power Electron., Vol. 4, no. 5, pp. 532–40, May 2011. DOI: 10.1049/iet-pel.2010.0049.
   Web of Science ®Google Scholar
• G. R. Walker, and P. C. Sernia, “Cascaded DC–DC converter connection of photovoltaic modules,” IEEE Trans. Power Electron, Vol. 19, no. 4, pp. 1130–9, Jul. 2004. DOI: 10.1109/TPEL.2004.830090.
   Web of Science ®Google Scholar
• F. L. Luo, and H. Ye, “Hybrid split capacitors and split inductors applied in positive output super-lift Luo-converters,” IET Power Electron., Vol. 6, no. 9, pp. 1759–68, Nov. 2013. DOI: 10.1049/iet-pel.2012.0634.
   Web of Science ®Google Scholar
• F. L. Luo, and H. Ye, “Super-lift boost converters,” IET Power Electron., Vol. 7, no. 7, pp. 1655–64, Jul. 2014. DOI: 10.1049/iet-pel.2012.0531.
   Web of Science ®Google Scholar
• Y. Berkovich, B. Axelrod, R. Madar, and A. Twina, “Improved Luo converter modifications with increasing voltage ratio,” IET Power Electron., Vol. 8, no. 2, pp. 202–12, Nov. 2014. DOI: 10.1049/iet-pel.2014.0135.
   Web of Science ®Google Scholar
• H. Yu, “A novel control strategy of output voltage ripple reduction in buck converters,” in Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC), Texas, USA, Mar. 2011, pp. 1910–14.
   Google Scholar
• N. T. Tweig, “Speed control of a DC series motor using buck-boost converter,” Eleventh International Middle East Power Systems Conference (MEPCON), Vol. 1, pp. 1–9, Dec. 2006.
   Google Scholar
• S. M. Chen, T. J. Liang, L. S. Yang, and J. F. Chen, “A cascaded high step-up DC–DC converter with single switch for micro source applications,” IEEE Trans. Power Electron, Vol. 26, no. 4, pp. 1146–53, Apr. 2011. DOI: 10.1109/TPEL.2010.2090362.
   Web of Science ®Google Scholar
• P. F. Melo, R. Gules, E. F. R. Romaneli, and R. C. Annunziato, “A modified SEPIC converter for high-power-factor rectifier and universal input voltage applications,” IEEE Trans. Power Electron, Vol. 25, no. 2, pp. 310–21, Feb. 2010. DOI: 10.1109/TPEL.2009.2027323.
   Web of Science ®Google Scholar
• H. J. Chiu, and S. J. Cheng, “Design considerations of an SEPIC PFC converter for driving multiple lighting LED lamps,” Int. J. Circuit Theory Appl., Vol. 37, no. 8, pp. 928–40, Oct. 2009. DOI: 10.1002/cta.495.
   Web of Science ®Google Scholar
• R. Gules, W. M. D. Santos, F. A. D. Reis, E. F. R. Romaneli, and A. A. Badin, “A modified SEPIC converter with high static gain for renewable applications,” IEEE Trans. Power Electron, Vol. 29, no. 11, pp. 5860–71, Nov. 2014. DOI: 10.1109/TPEL.2013.2296053.
   Web of Science ®Google Scholar
• H. B. Shin, J. G. Park, S. K. Chung, H. W. Lee, and T. A. Lipo, “Generalised steady-state analysis of multiphase interleaved boost converter with coupled inductors,” IEE Proc., Electr. Power Appl., Vol. 152, no. 3, pp. 584–94, May 2005. DOI: 10.1049/ip-epa:20045052.
   Google Scholar
• R. Raja, A. Jagadeesan, R. P. J. Kiruba, and C. Navabalachandru, “An efficient high-step-up interleaved with a common active clamp DC–DC converter for electric vehicle,” in International Conference on Energy Efficient Technologies for Sustainability (ICEETS), Nagercoil, Tamilnadu, India, Apr. 2013, pp. 760–64.
   Google Scholar
• S. W. Lee, and H. L. Do, “Zero-ripple input-current high-step-up boost–SEPIC DC–DC converter with reduced switch-voltage stress,” IEEE Trans. Power Electron, Vol. 32, no. 8, pp. 6170–77, Aug. 2017. DOI: 10.1109/TPEL.2016.2615303.
   Web of Science ®Google Scholar
• Y. Furukawa, S. Tsuruoka, S. Ikeda, and F. Kurokawa, “Basic characteristics of active clamp resonant SEPIC circuit,” in IEEE International Conference on Renewable Energy Research and Applications (ICRERA), Birmingham, UK, Nov. 2016, pp. 857–60.
   Google Scholar
• V. Viswanathan, and S. Jeevananthan, “Approach for torque ripple reduction for brushless DC motor based on three-level neutral-point-clamped inverter with DC–DC converter,” IET Power Electron., Vol. 8, no. 1, pp. 47–55, Nov. 2014. DOI: 10.1049/iet-pel.2013.0471.
   Web of Science ®Google Scholar
• S. Tingna, Y. Guo, P. Song, and C. Xia, “A new approach of minimizing commutation torque ripple for brushless DC motor based on DC–DC converter,” IEEE Trans. on Ind. Electron, Vol. 57, no. 10, pp. 3483–90, Dec. 2009.
   Web of Science ®Google Scholar