A Review of the EMI Effect on Natural Convection Heatsinks

References

• X. Meng, J. Zhu, X. Wei, and Y. Yan, “Natural convection heat transfer of a straight-fin heat sink,” Int. J. Heat Mass Transfer., Vol. 123, pp. 561–568, 2018.
   Web of Science ®Google Scholar
• M. T. Zhang, M. M. Jovanovic, and F. C. Lee, “Design considerations for low-voltage on-board DC/DC modules for next generations of data processing circuits,” IEEE Trans. Power Electron., Vol. 11, no. 2, pp. 328–337, 1996.
   Web of Science ®Google Scholar
• O. Ozbalci, and A. Dogan, “Forced convection heat transfer from porous heat sinks placed in partially open cavity: some case studies,” Exp. Heat Transfer, Vol. 31, no. 3, pp. 183–193, 2018.
   Web of Science ®Google Scholar
• K. Lampio, and R. Karvinen, “A new method to optimize natural convection heat sinks,” Heat Mass Transfer, Vol. 54, pp. 2571–2580, 2018.
   Web of Science ®Google Scholar
• S. S. Haghighi, H. Goshayeshi, and M. R. Safaei, “Natural convection heat transfer enhancement in new designs of plate-fin based heat sinks,” Int. J. Heat Mass Transfer, Vol. 125, pp. 640–647, 2018.
   Web of Science ®Google Scholar
• K. Lampio, and R. Karvinen, “Optimization of convectively cooled heat sinks,” Microelectron. Reliab., Vol. 79, pp. 473–479, 2017.
   Web of Science ®Google Scholar
• M. Iyengar, and A. Bar-Cohen, “Design for manufacturability of forced convection air-cooled fully ducted heat sinks,” Electr. Cool., Vol. 13, pp. 12, 2007.
   Google Scholar
• S. Manivannan, R. Arumugam, S. Prasanna Devi, S. Paramasivam, P. Salil, and B. Subbarao. “Optimization of heat sink EMI using design of experiments with numerical computational investigation and experimental validation,” in Proc. IEEE Int. Symp. Electromagn. Compat., July 2010, pp. 295–300.
   Google Scholar
• G. Shen, S. Yang, J. Sun, S. Xu, D. J. Pommerenke, and V. V. Khilkevich, “Maximum radiated emissions evaluation for the heatsink/IC structure using the measured near electrical field,” IEEE Trans. Electromagn. Compat., Vol. 59, pp. 1408–1414, 2017.
   Web of Science ®Google Scholar
• S. Manivannan, S. P. Devi, R. Arumugam, and N. Sudharsan. “Multi-objective optimization of flat plate heat sink using Taguchi-based Grey relational analysis,” in Proc. the International Journal of Advanced Manufacturing Technology, Vol. 52, 2011, pp. 739–749.
   Google Scholar
• X. He, H. Ke, and T. Hubing. “Determining the maximum allowable heatsink voltage to ensure compliance with a given radiated emissions specification,” in Proc. IEEE Int. Symp. Electromagn. Compat., Aug. 2008, pp. 1–4.
   Google Scholar
• X. Li, B.-B. Xu, and H.-L. Peng. “A 60GHz antenna array with heatsink considerations for massive-MIMO applications,” in Proc. IEEE Electrical Design of Advanced Packaging and Systems (EDAPS), Dec. 2016, pp. 79–81.
   Google Scholar
• J. Lin. “Dual-function 3D heatsink antenna for high-density 3D integration,” in Proc. IEEE International Workshop on Radio-Frequency Integration Technology, Dec. 2007.
   Google Scholar
• E. Chikando, S. Connor, and B. Archambeault. Reduction of heatsink emissions by application of lossy materials,” in Proc. IEEE Int. Symp. Electromagn. Compat., July 2010, pp. 239–243.
   Google Scholar
• M. Rao, N. Oraon, and P. Sravani. “Self-assembly based high frequency 3D heatsink antenna,” in Proc. IEEE Region 10 Symposium, Apr. 2014, pp. 10–14.
   Google Scholar
• X. He, and T. H. Hubing, “A closed-form expression for estimating the maximum radiated emissions from a heatsink on a printed circuit board,” IEEE Trans. Electromagn. Compat., Vol. 54, pp. 205–211, 2012.
   Web of Science ®Google Scholar
• X. He. “Estimating and mitigating radiated emissions from PCB heatsinks,” PhD Thesis, Clemson University, Department of Electrical and Computer Enginering, 68 p, 2011.
   Google Scholar
• H.-W. Shim, and T. H. Hubing, “Model for estimating radiated emissions from a printed circuit board with attached cables due to voltage-driven sources,” IEEE Trans. Electromagn. Compat., Vol. 47, pp. 899–907, 2005.
   Web of Science ®Google Scholar
• C. E. Brench. “Heatsink radiation as a function of geometry,” in Proc. IEEE Int. Symp. Electromagn. Compat., Aug. 1994, pp. 105–109.
   Google Scholar
• N. J. Ryan, B. Chambers, and D. Stone, “FDTD modeling of heatsink RF characteristics for EMC mitigation,” IEEE Trans. Electromagn. Compat., Vol. 44, pp. 458–465, 2002.
   Web of Science ®Google Scholar
• K. Li, C. F. Lee, S. Y. Poh, R. T. Shin, and J. A. Kong, “Application of FDTD method to analysis of electromagnetic radiation from VLSI heatsink configurations,” IEEE Trans. Electromagn. Compat., Vol. 35, pp. 204–214, 1993.
   Web of Science ®Google Scholar
• N. Ryan, D. Stone, and B. Chambers. “FDTD modeling of heatsinks for EMC,” in Proc. International Conference and Exhibition on Electromagnetic Compatibility, July 1999, pp. 125–130.
   Google Scholar
• C. Lee, K. Li, S. Poh, R. Shin, and J. Kong. “Electromagnetic radiation from a VLSI package and heatsink configuration,” in Proc. IEEE Int. Symp. Electromagn. Compat., July 1991, pp. 393-398.
   Google Scholar
• S. Das, and T. Roy. “An investigation on radiated emissions from heatsinks,” in Proc. IEEE Int. Symp. Electromagn. Compat., Aug. 1998, pp. 784–789.
   Google Scholar
• J. Nonaka, S. Nitta, A. Mutoh, and T. Miyashita. “The influence of straight-fin heatsink on noise susceptibility of IC-capacitive coupling,” in Proc. IEEE Int. Symp. Electromagn. Compat., Aug. 1999, pp. 345–350.
   Google Scholar
• P. Qu, M. K. Iyer, and Y. Qiu. “Radiated emission from pin-fin heat sink mounted on an EBGA package,” in Proc. IEEE 8th Topical Meeting on Electrical Performance of Electronic Packaging (Cat. No. 99TH8412), Oct. 1999, pp. 199–202.
   Google Scholar
• A. E. Yilmaz, K. Aygün, J. M. Jin, and E. Michiclssen. “Fast analysis of heatsink emissions with time-domain AIM,” in Proc. IEEE Int. Symp. Electromagn. Compat., May. 2003, pp. 871–874.
   Google Scholar
• K. Kostov, J. Rabkowski, and H. P. Nee. “Conducted EMI from SiC BJT boost converter and its dependence on the output voltage, current, and heatsink connection,” in Proc. IEEE Annual International Energy Conversion Congress and Exhibition, June 2013, pp. 1125–1130.
   Google Scholar
• C. H. Ahn, and J. H. Oh, “Resistive grounding technique of heat sink for reducing radiation noise,” J. Electr. Eng. Technol., Vol. 9, pp. 1724–1728, 2014.
   Web of Science ®Google Scholar
• J. Chiappe. “Additional techniques to reduce heatsink emissions utilizing RF absorbers,” in Proc. IEEE Int. Symp. Electromagn. Compat., Aug. 2012, pp. 56–63.
   Google Scholar
• S. Yalçın, S. Ozen, and S. Helhel, “EMI filter design based on the separated electromagnetic interference in switched mode power supplies,” Turk. J. Electr. Eng. Co., Vol. 26, 3033–3043, 2018.
   Web of Science ®Google Scholar
• A. Talebzadeh, P. C. Sochoux, J. Li, Q. Liu, K. Ghosh, and D. Pommerenke, “Shielding effectiveness, coupling path, and emi mitigation for QSFP cages with heatsink,” IEEE Trans. Electromagn. Compat., Vol. 60, pp. 1254–1262, 2018.
   Web of Science ®Google Scholar
• D. G. Wang, J. L. Knighten, and P. Muller. “An integrated vent, heatsink and EMI shield,” in Proc. IEEE Semiconductor Thermal Measurement and Management Symposium, Mar. 2002, pp. 125–131.
   Google Scholar
• Y. Arien, P. Dixon, M. Khorrami, A. Degraeve, and D. Pissoort. “Study on the reduction of heatsink radiation by combining grounding pins and absorbing materials,” in Proc. IEEE Int. Symp. Electromagn. Compat., Aug. 2015, pp. 773–778.
   Google Scholar
• X. Yang, Y. S. Cao, X. Wang, L. Zhang, S. He, and H. Zhao. “EMI radiation mitigation for heatsinks using characteristic mode analysis,” in Proc. IEEE Symposium on Electromagnetic Compatibility, Signal Integrity and Power Integrity, Mar. 2018.
   Google Scholar
• H. Jin, L. Zhang, X. L. Yang, P. Cheng, E. P. Li, and Y. J. Zhang. “A novel heatsink with mushroom-type EBG structure for EMI radiation suppression,” in Proc IEEE International Symposium on Electromagnetic Compatibility and 2018 IEEE Asia-Pacific Symposium on Electromagnetic Compatibility, May 2018, pp. 772–775.
   Google Scholar
• N. J. Ryan, B. Chambers, and D. A. Stone, “FDTD modeling of heatsink RF characteristics for EMC mitigation,” IEEE Trans. Electromagn. Compat, Vol. 44, pp. 458–465, 2002.
   Web of Science ®Google Scholar
• Z. Shi, P. Du, and B. Nie, “Study of heatsink electromagnetic radiation based on vector FEM,” Acta Electron. Sin., Vol. 11, pp. 1–13, 2009.
   Google Scholar
• S. K. Das, and T. Roy. “Investigation on radiated emissions from heatsinks,” in Proc. IEEE Int. Symp. Electromagn. Compat., 1998, pp. 784-789.
   Google Scholar
• A. Dolente. “Analysis of the heatsink influence on conducted and radiated electromagnetic interference in power electronic converters,” PhD Thesis, University of Bologna Department of Electrical Engineering, 67 p, 2007.
   Google Scholar
• S. Manivannan, R. Arumugam, S. Paramasivam, P. Salil, and B. S. Rao, “HFSS simulation, experimental investigation and optimization of heat sink EMI,” IET Power Electron., Vol. 3, pp. 881–891, 2010.
   Web of Science ®Google Scholar
• H. Dogan, I. B. Basyigit, and A. Genc, “Investigation of electromagnetic interference from cylindrical heatsinks in electronic circuits in 0–10 GHz frequency band,” Erzincan University Journal of Science and Technology, Vol. 13, pp. 502–510, 2020.
   Google Scholar
• A. Genc, H. Dogan, I. B. Basyigit, and S. Helhel, “Heatsink preselection chart to minimize radiated emission in broadband on the PCB,” IEEE Trans. Electromagn. Compat., Vol. 63, pp. 419–426, 2021. DOI:10.1109/TEMC.2020.3019958.
   Web of Science ®Google Scholar
• H. Dogan, I. B. Basyigit, and A. Genc. “Variation of radiated emission from heatsinks on PCB according to fin types”, in Proc. 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), Oct. 2019, pp. 1–4.
   Google Scholar
• H. Dogan, I. B. Basyigit, A. Genc, and S. Helhel, “Parametric study of the radiated emission from the plate-fin CPU heatsink at 2–8 GHz,” IEEE Trans. Electromagn. Compat., Vol. 62, pp. 2401–2410, 2020.
   Web of Science ®Google Scholar
• I. B. Basyigit, A. Genc, H. Dogan, F. A. Senel, and S. Helhel, “Deep learning for both broadband prediction of the radiated emission from heatsinks and heatsink optimization,” Eng. Sci. Technol. an Int. J., Vol. 24, pp. 706–714, 2021. DOI:10.1016/j.jestch.2021.01.006.
   Google Scholar
• A. B. Karaman, A. Kocakusak, A. Genc, and S. Helhel. “The effect of feeding point on electromagnetic emission due to heat sink”, in Proc. Photonics & Electromagnetics Research Symposium – Spring (PIERS-Spring), June 2019, pp. 368–371.
   Google Scholar
• I. B. Basyigit, A. Genc, H. Dogan, and S. Helhel, “The effect of fin types of the heatsinks on radiated emission on the printed circuit board at S-C band,” Microw. Opt. Technol. Lett., Vol. 62, pp. 3099–3106, 2020.
   Web of Science ®Google Scholar
• A. Genc, and S. Helhel. “The comparison of EM characteristics of the heatsinks with equal base area depending on the various geometries”, in Proceedings of 10th International Symposium on Intelligent Manufacturing and Service Systems (IMSS), Oct. 2019, pp. 979–985.
   Google Scholar