89
Views
2
CrossRef citations to date
0
Altmetric
Review Article

Application of Novel Six-phase Doubly fed induction generator for Open Phases through Modeling and Simulation

ORCID Icon &

References

  • J. R. Stewart, and D. D. Wilson, “High phase order transmission–a feasibility analysis part I–steady state considerations,” IEEE Trans. Power Appar. Syst., Vol. PAS-97, no. 6, pp. 2300–2307, 1978.
  • J. R. Stewart, and D. D. Wilson, “High phase order transmission–a feasibility analysis part II–over voltages and insulation requirements,” IEEE Trans. Power Appar. Syst., Vol. PAS-97, no. 6, pp. 2308–2317, 1978.
  • T. A. Lipo. “D-Q Model for six phase induction machines,” Int. conf. of Electrical Machines, ICEM Athens, pp. 860–867, 1980.
  • E. A. Klingshirn, “High phase order induction motors-: part I-description and theoretical considerations,” IEEE Trans. Power Appar. Syst, pp. 47–53, 1983. doi:10.1109/TPAS.1983.317996.
  • E. A. Klingshirn, “High phase order induction motors-: part II — experimental results,” IEEE Trans. Power Appar. Syst, pp. 54–59, 1983. doi:10.1109/TPAS.1983.317997.
  • Y. Zhao, and T. A. Lipo, “Space vector PWM control of dual three-phase induction machine using vector space decomposition,” IEEE Trans. Ind. Appl, pp. 1100–1109, 1995. doi:10.1109/28.464525.
  • O. Ojo, and I. E. Davidson, “PWM-VSI inverter-assisted stand-alone dual stator winding induction generator,” IEEE Trans. Ind. Appl, Vol. 36, no. 6, pp. 1604–1611, 2000. doi:10.1109/28.887212.
  • E. Levi, F. Barrero, and M. J. Duran, “Multiphase machines and drives-revisited,” IEEE Trans. Ind. Electron, Vol. 63, no. 1, pp. 429–432, 2016. doi:10.1109/TIE.2015.2493510.
  • K. A. Chinmaya, and G. K. Singh, “Performance evaluation of multiphase induction generator in stand-alone and grid-connected wind energy conversion system,” IET Renew. Power Generation, Vol. 12, no. 7, pp. 823–831, 2018.
  • E. Levi, R. Bojoi, F. Profumo, H. A. Toliyat, and S. Williamson, “Multiphase induction motor drives – A technology status review,” IET Electr. Power Appl, Vol. 1, no. 4, pp. 489–516, 2007. doi:10.1049/iet-epa:20060342.
  • E. Levi, “Advances in converter control and innovative exploitation of additional degrees of freedom for multiphase machines,” IEEE Trans. Ind. Electron, Vol. 63, no. 1, pp. 433–448, 2016. doi:10.1109/TIE.2015.2434999.
  • Y. Zhao, and T. A. Lipo, “Modeling and control of a multi-phase induction machine with structural unbalance,” IEEE Trans. Energy Convers, Vol. 11, no. 3, pp. 578–584, 1996.
  • T. S. De Souza, R. R. Bastos, and B. J. Cardoso Filho, “Modeling and control of a nine-phase induction machine with open phases,” IEEE Trans. Ind. Appl, Vol. 54, no. 6, pp. 6576–6585, Nov. 2018. doi:10.1109/TIA.2018.2852282.
  • R. Kianinezhad, B. Nahid-Mobarakeh, L. Baghli, F. Betin, and G. A. Capolino, “Modeling and control of six-phase symmetrical induction machine under fault condition due to open phases,” IEEE Trans. Ind. Electron, Vol. 55, no. 5, pp. 1966–1977, 2008. doi:10.1109/TIE.2008.918479.
  • N. K. Mishra, Z. Husain, and M. R. Khan, “D, Q reference frames for the simulation of multiphase (six phase) wound rotor induction generator driven by a wind turbine for disperse generation,” IET Electr. Power Appl, Vol. 13, no. 11, pp. 1823–1834, 2019. doi:10.1049/iet-epa.2019.0004.
  • N. K. Mishra, and Z. Husain, “Novel six phase doubly fed induction generator through modeling and simulation-A comparison with conventional doubly Fed induction generator,” in 2019 International Conference on Power Electronics, Control and Automation (ICPECA), New Delhi, India, 2019, pp. 1–5. doi:10.1109/ICPECA47973.2019.8975605.
  • N. K. Mishra, Z. Husain, and A. Iqwal, “Modeling and analysis of novel six-phase DFIG through asymmetrical winding structure for disperse generation,” Int. Trans. Electr. Energy Syst, no. June, pp. 1–26, 2020. doi:10.1002/2050-7038.12649.
  • G. D. Marques, and M. F. Iacchetti, “DFIG topologies for DC networks: A review on control and design features,” IEEE Trans. Power Electron, Vol. 34, no. 2, pp. 1299–1316, 2019. doi:10.1109/TPEL.2018.2829546.
  • N. K. mishra, Z. Husain, and A. Mukhraiya, “Novel six-phase DFIG suitable for three-phase and six-phase grid-connected disperse generation,” in 2020 IEEE Electric Power and Energy Conference (EPEC), Edmonton, AB, Canada, 2020, pp. 1–6. doi:10.1109/EPEC48502.2020.9320093.
  • P. Maciejewski, and G. Iwanski, “Modeling of six-phase double Fed induction machine for autonomous DC voltage generation,” in 2015 Tenth International Conference on Ecological Vehicles and Renewable Energies (EVER), Monte Carlo, Monaco, 2015, pp. 1–6. doi:10.1109/EVER.2015.7112943.
  • N. K. Mishra, Z. Husain, and G. Mishra, “Modeling and simulation of novel quasi-Six phase DFIG in multiple reference frames,” in 2020 IEEE 7th Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON), Prayagraj, India, 2020, pp. 1–6. doi:10.1109/UPCON50219.2020.9376500.
  • M. Lamnadi, M. Trihi, B. Bossoufi, and A. Boulezhar, “Modeling and control of a doubly-fed induction generator for wind turbine-generator systems,” Int. J. Power Electron. Drive Syst, 2016. doi:10.11591/ijpeds.v7.i3.pp982-995.
  • G. Abad, J. Taberna Lopez, M. Rodríguez, L. Marroyo, and G. Iwanski. Doubly fed induction machine: modeling and control for wind energy generation. Hoboken, NJ: John Wiley & Sons, 2011.
  • D. V. Spyropoulos, and E. D. Mitronikas, “A review on the faults of electric machines used in electric ships,” Adv. Power Electron, Vol. 2013, pp. 1–8, 2013. doi:10.1155/2013/216870.
  • A. Balasubramanian, and R. Muthu, “Model based fault detection and diagnosis of doubly fed induction generators – a review,” Energy Procedia, Vol. 117, pp. 935–942, 2017.
  • S. Djurovic, S. Williamson, and A. Renfrew, “Dynamic model for doubly-fed induction generators with unbalanced excitation, both with and without winding faults,” IET Electr. Power Appl, Vol. 3, no. 3, pp. 171–177, 2009. doi:10.1049/iet-epa.2008.0054.
  • G. K. Singh, and V. Pant, “Analysis of a multiphase induction machine under fault condition in a phase-redundant A . C . drive system,” Electr. Mach. Power Syst., Vol. 28, no. 6, pp. 577–590, 2000. doi:10.1080/073135600268199.
  • J. Lopez, P. Sanchis, X. Roboam, and L. Marroyo, “Dynamic behavior of the doubly fed induction generator during three-phase voltage dips,” IEEE Trans. Energy Convers, Vol. 22, no. 3, pp. 709–717, 2007.
  • O. Imoru, A. A. Jimoh, and Y. Hamam, “Origin and manifestation of electrical machine faults – A review,” in The 2nd IEEE Conference on Power Engineering and Renewable Energy (ICPERE), 2014, pp. 189–194.
  • S. Bazine, and J. C. Trigeassou. “Faults in electrical machines and their diagnosis,” in Electrical Machines Diagnosis. Hoboken, NJ: John Wiley & Sons, Inc., 2013, pp. 1–22.
  • N. K. Mishra, Z. Husain, and M. R. Khan, “D, Q reference frames for the simulation of multiphase (six phase) wound rotor induction generator driven by a wind turbine for disperse generation,” IET Electr. Power Appl., Vol. 13, pp. 1823–1834, 2019. doi:10.1049/iet-epa.2019.0004.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.