97
Views
2
CrossRef citations to date
0
Altmetric
Power Electronics

Design and Characterization of a 900 MHz Energy Harvesting Prototype

, &

References

  • H. S. Kim, J. H. Kim, and J. Kim, “A review of piezoelectric energy harvesting based on vibration,” Int. J. Prec. Eng. Manuf., Vol. 12, no. 6, pp. 1129–41, Dec. 2011.
  • S. Saadon, and O. Sidek, “A review of vibration-based MEMS piezoelectric energy harvesters,” Energy Convers. Manag., Vol. 52, no. 1, pp. 500–4, Jan. 2011.
  • N. Tran, M. H. Ghayesh, and M. Arjomandi, “Ambient vibration energy harvesters: A review on nonlinear techniques for performance enhancement,” Int. J. Eng. Sci., Vol. 127, pp. 162–85, June 2018.
  • A. Hande, T. Polk, W. Walker, and D. Bhatia, “Indoor solar energy harvesting for sensor network router nodes,” Microprocess. Microsyst., Vol. 31, no. 6, pp. 420–32, Sept. 2007.
  • R. Ibrahim, T. D. Chung, S. M. Hassan, K. Bingi, and S. K. Binti Salahuddin, “Solar energy harvester for industrial wireless sensor nodes,” Procedia. Comput. Sci., Vol. 105, pp. 111–8, Jan. 2017.
  • D. Dondi, A. Bertacchini, L. Larcher, P. Pavan, D. Brunelli, and L. Benini, “A solar energy harvesting circuit for low power applications,” in 2008 IEEE International Conference on Sustainable Energy Technologies, Nov. 2008, pp. 945–9. doi:10.1109/ICSET.2008.4747143.
  • H. Sharma, A. Haque, and Z. Jaffery, “Modeling and optimisation of a solar energy harvesting system for wireless sensor network nodes,” J. Sens. Actuator Netw., Vol. 7, no. 3, pp. 40, Sept. 2018.
  • H. A. Sodano, G. E. Simmers, R. Dereux, and D. J. Inman, “Recharging batteries using energy harvested from thermal gradients,” J. Intell. Mater. Syst. Struct., Vol. 18, no. 1, pp. 3–10, Jan. 2007.
  • M. Ujihara, G. P. Carman, and D. G. Lee, “Thermal energy harvesting device using ferromagnetic materials,” Appl. Phys. Lett., Vol. 91, no. 9, pp. 093508, Aug. 2007.
  • X. Lu, and S. H. Yang, “Thermal energy harvesting for WSNs,” in 2010 IEEE International Conference on Systems, Man and Cybernetics, Oct. 2010, pp. 3045–52. doi:10.1109/ICSMC.2010.5641673.
  • S. Kim, R. Vyas, J. Bito, K. Niotaki, A. Collado, A. Georgiadis, and M. M. Tentzeris, “Ambient RF energy-harvesting technologies for self-sustainable standalone wireless sensor platforms,” Proc. IEEE, Vol. 102, no. 11, pp. 1649–66, Oct. 2014.
  • X. Lu, P. Wang, D. Niyato, D. I. Kim, and Z. Han, “Wireless networks with RF energy harvesting: A contemporary survey”, IEEE Commun. Surv. Tutor., Vol. 17, no. 2, pp. 757–89, Secondquater 2015.
  • H. Jabbar, Y. S. Song, and T. T. Jeong, “RF energy harvesting system and circuits for charging of mobile devices,” IEEE Trans. Consum. Electron., Vol. 56, no. 1, pp. 247–53, Mar. 2010.
  • N. S. Hudak, and G. G. Amatucci, “Small-scale energy harvesting through thermoelectric, vibration, and radiofrequency power conversion,” J. Appl. Phys., Vol. 103, no. 10, pp. 5, May 2008.
  • M. Pinuela, P. D. Mitcheson, and S. Lucyszyn, “Ambient RF energy harvesting in urban and semi-urban environments,” IEEE Trans. Microwave Theory Tech., Vol. 61, no. 7, pp. 2715–26, July 2013.
  • J. Tavares, N. Barroca, H. M. Saraiva, L. M. Borges, F. J. Velez, C. Loss, and N. B. Carvalho, “Spectrum opportunities for electromagnetic energy harvesting from 350 MHz to 3 GHz,” in 2013 7th International Symposium on Medical Information and Communication Technology (ISMICT), May 2013, pp. 126–30. doi:10.1109/ISMICT.2013.6521714.
  • S. Shrestha, S. K. Noh, and D. Y. Choi, “Comparative study of antenna designs for RF energy harvesting,” Int. J. Antennas. Propag., Vol. 2013, Article ID 385260, pp. 10, Feb. 2013. doi:10.1155/2013/385260.
  • T. Taris, V. Vigneras, and L. Fadel, “A 900 MHz RF energy harvesting module,” in 10th IEEE International NEWCAS Conference, June 2012, pp. 445–8. doi:10.1109/NEWCAS.2012.6329052.
  • A. Mouapi, and N. Hakeem, “A new approach to design autonomous wireless sensor node based on RF energy harvesting system,” Sensors, Vol. 18, no. 1, pp. 133, Jan. 2018.
  • L. M. Borges, R. Chávez-Santiago, F. J. V. Barroca, and I. Balasingham, “Radio-frequency energy harvesting for wearable sensors,” Health. Technol. Lett., Vol. 2, no. 1, pp. 22–7, Feb. 2015.
  • RF Solutions, “GSM antenna, Helical SMA”, ANT-HEl2-1. Available: www.rfsolutions.co.uk [Accessed Nov. 2018].
  • I. Anchustegui Echearte, D. Jimenez Lopez, M. Gasulla Forner, F. Giuppi, and A. Georgiadis, “A high-efficiency matching technique for low power levels in RF harvesting,” in PIERS 2013 Stockholm-Progress in Electromagnetics Research Symposium Proceedings, Aug. 2013, pp. 1806–10. Available: http://hdl.handle.net/2117/22874
  • S. Agrawal, S. K. Pandey, J. Singh, and M. S. Parihar, “Realization of efficient RF energy harvesting circuits employing different matching technique,” Fifteenth International Symposium on Quality Electronic Design, 754–61, Mar. 2014. doi:10.1109/ISQED.2014.6783403.
  • J. Jordana, F. Reverter, and M. Gasulla, “Power efficiency maximization of an RF energy harvester by fine-tuning an L-matching network and the load,” Procedia. Eng., Vol. 120, pp. 655–8, Jan. 2015.
  • M. Gasulla, J. Jordana, F. J. Robert, and J. Berenguer, “Analysis of the optimum gain of a high-pass L-matching network for rectennas,” Sensors, Vol. 17, no. 8, pp. 1712, Jul. 2017.
  • J. A. Akkermans, M. C. Van Beurden, G. J. N. Doodeman, and H. J. Visser, “Analytical G. J. N models for low-power rectenna design,” IEEE Antennas Wirel. Propag. Lett., Vol. 4, pp. 187–90, Jun. 2005.
  • M. K. Hosain, A. Z. Kouzani, S. Tye, A. Kaynak, and M. Berk, “RF rectifiers for EM power harvesting in a deep brain stimulating device,” Australas. Phys. Eng. Sci. Med., Vol. 38, no. 1, pp. 157–72, Jan. 2015.
  • SG labs, Marconi radio communications set 2955B, accessed Nov. 2019.
  • L. Fadel, L. Oyhenart, R. Bergès, V. Vigneras, and T. Taris, “A concurrent 915/2440 MHz RF energy harvester,” International Journal of Microwave and Wireless Technologies, Vol. 8, no. 3, pp. 405–13, Feb. 2016.
  • N. Md Din, C. K. Chakrabarty, A. Bin Ismail, K. K. A. Devi, and W. Y. Chen, “Design of RF energy harvesting system for energizing low power devices,” Prog. Electromagn. Res., Vol. 132, pp. 49–69, Sept. 2012.
  • M. Arrawatiwa, M. S. Barghini, and G. Kumar, “RF energy harvesting system from cell towers in 900 MHz band,” in Communications (NCC), 2011 National Conference, Jan. 2011, pp. 1–5. doi:10.1109/NCC.2011.5734733.
  • K. K. A. Devi, N. M. Din, and C. K. Chakrabarty, “Optimization of the voltage doubler stages in an RF-DC convertor module for energy harvesting,” Circuits and Systems, Vol. 3, no. 03, pp. 216, Apr. 2012.
  • Z. Zeng, S. Shen, B. Wang, J. J. Estrada-López, R. Murch, and E. Sánchez-Sinencio, “An ultra-low-power power management circuit with output bootstrapping and reverse leakage reduction function for RF energy harvesting,” in 2020 IEEE/MTT-S International Microwave Symposium (IMS), Los Angeles, CA, USA, 2020, pp. 1059–62.
  • S. Shen, Y. Zhang, C. Chiu, and R. Murch, “An ambient RF energy harvesting system where the number of antenna ports is dependent on frequency,” IEEE Trans. Microwave Theory Tech., Vol. 67, no. 9, pp. 3821–32, Sept. 2019. doi: 10.1109/TMTT.2019.2906598.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.