Accelerating Time–Current Curve Computation of Induction Motor from Manufacturer Data

References

• M. Hamilton, “Starting of large HV motors on a weak power system-a case study,” High Volt. Design Install. Forum IDC Technical Conference, pp. 1–28, 2012.
   Google Scholar
• B. Venkataraman, B. Codsey, W. Premelani, E. Shulman, M. Thaku, and R. Midence. “Fundamentals of a motor thermal model and its applications in motor protection,” Annual Conference for Protective Relay Engineers, 2005, pp. 127–144.
   Google Scholar
• K. C. Agrawal. Industrial power engineering handbook. New Jersey: Newnes, 2001.
   Google Scholar
• L. Hewitson, M. Brown, B. Ramesh, and S. Mackay. Practical power systems protection. Oxford: Newnes, 2004.
   Google Scholar
• D. Reimert. Protective relay for power generation system. Florida: Taylor & Francis, 2006.
   Google Scholar
• J. E. DeCastro, R. T. Beck, C. Cai, and L. Yu, “Stall protection of large induction motors,” IEEE Trans. Ind. Appl., Vol. 31, no. 5, pp. 1159–1166, 1995.
   Web of Science ®Google Scholar
• M. Dsouza, M. Al-Turki, and M. Safwa, “Power system design for a large, dynamic natural gas filed: improving the field production profile,” IEEE Ind. Appl. Mag., Vol. 25, no. 5, pp. 35–46, 2019.
   Web of Science ®Google Scholar
• J. H. Dymond, “Stall time, acceleration time, frequency of starting: the myths and the facts,” IEEE Trans. Ind. Appl., Vol. 29, no. 1, pp. 42–51, 1993.
   Web of Science ®Google Scholar
• J. Vico, and R. Hunt, “Principles in motor protection,” IEEE Ind. Appl. Mag., Vol. 17, no. 6, pp. 52–61, 2011.
   Web of Science ®Google Scholar
• V. Cohen, “Induction motors-protection and starting,” Elektr. J. South Afr. Inst. Electr. Eng., Vol. 12, pp. 5–10, 1995.
   Google Scholar
• K. Smith, and S. Jain. “The necessity and challenges of modeling and coordinating microprocessor based thermal overload functions for device protection,” 70th Annual Conference for Protective Relay Engineers, 2017, pp. 1–22.
   Google Scholar
• P. S. Patil, and K. B. Porate. “Starting analysis of induction motor: a computer simulation by ETAP power station,” 2nd Int. Conf. Emerging Trends in Engineering and Technology, 2009, pp. 494–499.
   Google Scholar
• A. J. Wigington. “A comparison of induction motor starting methods being powered by a diesel-generator set,” M.S. thesis, Dept. Elect. Eng, Univ. Nebraska, Lincoln, NE, USA, 2010.
   Google Scholar
• R. Rahmani, A. A. Niaki, and S. H. H. Sadeghi. “Large induction motor starting time determination for the purpose of protection coordination,” 27th Iranian Conf. Electrical Engineering, 2019, pp. 475–480.
   Google Scholar
• A. Oun, I. Benabdallah, and C. Adnene, “Analysis and design of a grid connected real plant in Libya using ETAP software,” Int. J. Comp. Sci. Netw. Secur., Vol. 18, no. 3, pp. 31–40, 2018.
   Web of Science ®Google Scholar
• A. Leiria, P. Nunes, A. Morched, and M. T. C. Barros, “Induction motor response to voltage dips,” Electr. Power Syst. Res., Vol. 76, no. 8, pp. 676–680, 2006.
   Web of Science ®Google Scholar
• G. N. Popa, I. Popa, C. M. Dinis, and A. Iagar. “Determining start time for three-phase cage induction motor that drive belt transport conveyers. 12th Int. Conf. Optimization of Electrical and Electronic Equipment, 2010, pp. 447–452.
   Google Scholar
• P. Aree. “Starting time calculation of large induction motors using their manufacturer technical data,” 19th Int. Conf. Electrical Machines and System, 2016, pp. 1–5.
   Google Scholar
• V. P. Sakthivel, and S. Subramanian, “Bio-inspired optimization algorithms for parameter determination of three phase induction motor,” COMPEL, Vol. 31, no. 2, pp. 528–551, 2012.
   Web of Science ®Google Scholar
• G. S. Ayyappan, B. B. Babu, M. R. Raghavan, and R. Poonthalir, “GA & fuzzy logic-based condition monitoring of induction motor through estimated motor losses,” IETE. J. Res., 2021. Published online: 27 Apr 2021. doi:10.1080/03772063.2021.1913075.
   Google Scholar
• M. Haque, “Determination of NEMA design induction motor parameters from manufacturer data,” IEEE Trans. Energy Convers., Vol. 23, no. 4, pp. 997–1004, 2008.
   Web of Science ®Google Scholar
• M. Al-Badri, P. Pillay, and P. Angers, “A novel in situ efficiency estimation algorithm for three-phase IM using GA, IEEE method F1 calculations, and pretested motor data,” IEEE Trans. Energy Convers., Vol. 30, no. 3, pp. 1092–1102, 2015.
   Web of Science ®Google Scholar
• J. Pedra, “On the determination of induction motor parameters from manufacturer data for electromagnetic transient programs,” IEEE Trans. Power Syst., Vol. 23, no. 4, pp. 1709–1718, 2008.
   Web of Science ®Google Scholar
• P. Aree, “Slip-current curve determination of induction motor using technical data,” ECTI Conference, pp. 175–178, 2017.
   Google Scholar
• J. Buksnaitis, “Analytical determination of mechanical characteristics of asynchronous motors by varying the electric current frequency,” Electr. Electr. Eng., Vol. 112, no. 6, pp. 3–6, 2011.
   Google Scholar
• M. Ikeda, and T. Hiyama, “Simulation studies of the transients of squirrel-cage induction motors,” IEEE Trans. Energy Convers., Vol. 22, no. 2, pp. 233–239, 2007.
   Web of Science ®Google Scholar
• S. Ansuj, F. Shokooh, and R. Schinzinger, “Parameter estimation for induction machines based on sensitivity analysis,” IEEE Trans. Ind. Appl., Vol. 25, no. 6, pp. 1035–1040, 1989.
   Web of Science ®Google Scholar
• D. Lindenmeyer, H. W. Dommel, A. Moshref, and P. Kundur, “An induction motor parameter estimation method,” Elect. Power Energy Syst., Vol. 23, no. 4, pp. 251–262, 2001.
   Web of Science ®Google Scholar
• M. Akbaba, M. Taleb, and A. Rumeli, “Improved estimation of induction machine parameters,” Electric Power Syst. Res., Vol. 34, no. 1, pp. 65–73, 1995.
   Web of Science ®Google Scholar
• The Mathworks Inc.: MATLAB Release 2021a, available at http://www.mathworks.com (accessed September 2021).
   Google Scholar
• L. Monjo, H. Kojooyan-Jafari, F. Corcoles, and J. Pedra, “Squirrel-cage induction motor parameter estimation using a variable frequency test,” IEEE Trans. Energy Convers., Vol. 30, no. 2, pp. 550–557, 2015.
   Web of Science ®Google Scholar
• W. Zoczara, Z. Szulc, and J. Przybylski, “Start of the cage induction motor in rugged conditions,” Zeszyty Probl. Maszyny Elektr., Vol. 72, pp. 209–213, 2005.
   Google Scholar
• M. Grzeczkowicz. “Analysis of the medium voltage induction motor start-up including connecting to the grid,” Dissertation, Faculty of Elect. Eng, Politechanika Warszawska, Poland, 2012.
   Google Scholar
• H. Martin, J. de la Hoz, L. Monjo, and J. Pedra, “Study of reduced-order models of squirrel-cage induction motors,” Elect. Power Compon. Syst., Vol. 39, no. 14, pp. 1542–1562, 2011.
   Web of Science ®Google Scholar
• M. Tooley. Plant and process engineering. Oxford: Butterworh-Heinemann, 2010.
   Google Scholar
• IEEE Task Force, “Standard load models for power flow and dynamic performance simulation,” IEEE Trans. Power Syst., Vol. 10, no. 3, pp. 1302–1313, 1995.
   Web of Science ®Google Scholar
• Sulzer Pumps. Sulzer centrifugal pump handbook. Essex: Elsevier Science Publisher Ltd, 1989.
   Google Scholar
• J. J. Cathey, R. K. Cavin, and A. K. Ayoub, “Transient load model of an induction machine,” IEEE Trans. Power. App. Syst., Vol. 92, no. 4, pp. 1399–1406, 1973.
   Google Scholar
• D. Zwillinger. CRC Standard mathematical tables and formulae. Boca Raton, FL: CRC Press, 2018.
   Google Scholar