222
Views
12
CrossRef citations to date
0
Altmetric
Power Electronics

Determination of Power Transformers Health Index Using Parameters Affecting the Transformer’s Life

ORCID Icon, , , ORCID Icon, &

References

  • L. Tightiz, M. A. Nasab, H. Yang, and A. Addeh, “An intelligent system based on optimized ANFIS and association rules for power transformer fault diagnosis,” ISA Trans., Vol. 103, pp. 63–74, 2020. ISSN 0019-0578.
  • R. Villarroel, B. G. de Burgos, and D. F. García, “Moisture dynamics in natural-ester filled transformers,” Int. J. Electr. Power Energy Syst., Vol. 124, pp. 106172, 2021.
  • M. Zand, M. A. Nasab, P. Sanjeevikumar, P. K. Maroti, and J. B. Holm-Nielsen, “Energy management strategy for solid-state transformer-based solar charging station for electric vehicles in smart grids,” IET Renew. Power Gener., Vol. 14, no. 18, pp. 3843–3852, 2020), IET Digital Library, https://digital-library.theiet.org/content/journals/10.1049/iet-rpg.2020.0399.
  • H. Ahmadi-Nezamabad, M. Zand, A. Alizadeh, M. Vosoogh, and S. Nojavan, “Multi-objective optimization based robust scheduling of electric vehicles aggregator,” Sustainable Cities and Society, Vol. 47, pp. 101494, 2019.
  • C. Oria, D. Ferreño, I. Carrascal, A. Ortiz, and I. Fernández, “Study on the mechanical failure of the cellulosic insulation of continuously transposed conductors in power transformers under the influence of short circuits and thermal ageing,” Eng. Fail. Anal., Vol. 124, pp. 105356, 2021.
  • M. Zand, M. A. Nasab, A. Hatami, M. Kargar, and H. R. Chamorro, “Using adaptive fuzzy logic for intelligent Energy management in Hybrid vehicles,” in 2020 28th Iranian Conference on Electrical Engineering (ICEE), pp. 1–7.
  • S. Nasri, S. A. Nowdeh, I. F. Davoudkhani, M. J. H. Moghaddam, A. Kalam, S. Shahrokhi, and M. Zand, “Maximum Power point tracking of Photovoltaic Renewable Energy System using a New method based on turbulent flow of water-based optimization (TFWO) under Partial shading conditions,” in Fundamentals and innovations in solar energy, Singapore: Springer, pp. 285–310. 978-981-336-456-1.
  • A. Rohani, M. Joorabian, M. Abasi, and M. Zand, “Optimal reactive power dispatch using θ-social mimic optimization (θ-SMO),” J. Intell. Fuzzy Syst. (2020).
  • M. Zand, M. A. Nasab, O. Neghabi, M. Khalili, and A. Goli, “Fault locating transmission lines with thyristor-controlled series capacitors By fuzzy logic method,” in 2020 14th International Conference on Protection and Automation of Power Systems (IPAPS), Tehran, Iran, 2019, pp. 62–70.
  • M. Hayati, and G. Karimi, “Short-Channel Effects improvement of carbon nanotube field effect transistors,” in 2020 28th Iranian Conference on Electrical Engineering (ICEE), Tabriz, Iran, 2020, pp. 1–6.
  • M. Zand, O. Neghabi, M. A. Nasab, M. Eskandari, and M. Abedini, “A Hybrid scheme for Fault locating in transmission lines compensated by the TCSC,” in 2020 15th International Conference on Protection and Automation of Power Systems (IPAPS), 2020, pp. 130–135.
  • M. Zand, M. Azimi Nasab, M. Khoobani, A. Jahangiri, S. Hossein Hosseinian, and A. Hossein Kimiai, “Robust speed control for induction motor Drives using STSM control,” in 2021 12th Power Electronics, Drive Systems, and Technologies Conference (PEDSTC), 2021, pp. 1–6.
  • P. Sanjeevikumar, M. Zand, M. A. Nasab, M. A. Hanif, and M. S. Bhaskar, “Spider community optimization Algorithm to determine UPFC optimal size and location for improve dynamic stability,” in 2021 IEEE 12th Energy Conversion Congress & Exposition - Asia (ECCE-Asia), 2021, pp. 2318–2323.
  • M. Azimi Nasab, M. Zand, M. Eskandari, P. Sanjeevikumar, and P. Siano, “Optimal planning of electrical appliance of residential units in a smart home network using cloud services,” Smart Cities, Vol. 4, pp. 1173–1195, 2021..
  • M. A. Nasab, M. Zand, S. Padmanaban, M. Sagar, and J. M. Bhaskar, “An efficient robust optimization model for the unit commitment considering of renewables uncertainty and pumped-storage hydropower,” Comput. Electr. Eng. (2022).
  • M. Azimi Nasab, M. Zand, S. Padmanaban, T. Dragicevic, and B. Khan, “Simultaneous long-term planning of flexible electric vehicle photovoltaic charging stations in terms of load response and technical and economic indicators,” World Electric Vehicle Journal, Vol. 12 (2021).
  • M. Ghasemi, E. Akbari, M. Zand, M. Hadipour, S. Ghavidel, and L. Li, “An efficient modified HPSO-TVAC-based dynamic economic dispatch of generating units,” Electr. Power Compon. Syst. (2019). doi:10.1080/15325008.2020.1731876.
  • L. Zheng, X. Han, Z. An, R. P. Kandula, K. Kandasamy, M. Saeedifard, and D. Divan, “SiC-Based 5 kV universal modular soft-switching solid-state transformer (M-S4T) for medium-voltage DC microgrids and distribution grids,” IEEE Trans. Power Electron. (2021).
  • S.-A. Ahmadi, and M. Sanaye-Pasand, “A robust multi-layer framework for online condition assessment of power transformers,” IEEE Trans. Power Delivery (2021).
  • S. Elbatawy, and W. G. Morsi, “Integration of prosumers with battery storage and electric vehicles via transactive energy,” IEEE Trans. Power Delivery (2021).
  • T. Zhang, X. Gong, and C. P. Chen, “BMT-Net: Broad multitask transformer network for sentiment analysis,” IEEE Transactions on Cybernetics (2021).
  • B. Das, and L. Cheim, “Transformer assessment using health index–part I,” Transformers Magazine, Vol. 7, no. 4, pp. 86–93, 2020.
  • S. Senthilkumar, A. Karthick, R. Madavan, A. A. M. Moshi, S. S. Bharathi, S. Saroja, and C. S. Dhanalakshmi, “Optimization of transformer oil blended with natural ester oils using taguchi-based grey relational analysis,” Fuel, Vol. 288, pp. 119629, 2021.
  • B. Alemayehu, A. Kota, A. Neidhard-Doll, V. Chodavarapu, and G. Subramanyam, “Cloud-connected real-time oil condition monitoring of utility transformers using impedance spectroscopy,” Instrum. Sci. Technol., 1–12, 2021.
  • D. Feng, J. Hao, L. Yang, R. Liao, X. Chen, and J. Li, “Comparison of AC breakdown characteristics on insulation paper (pressboard) immersed by three-element mixed insulation oil and mineral oil,” High Voltage, Vol. 5, no. 3, pp. 298–305, 2020.
  • D. Q. Tan, “Differentiation of roughness and surface defect impact on dielectric strength of polymeric thin films,” IET Nanodielectrics, Vol. 3, no. 1, pp. 28–31, 2020.
  • Y. Cilliyuz, Y. Bicen, F. Aras, and G. Aydugan, “Measurements and performance evaluations of natural ester and mineral oil-immersed identical transformers,” Int. J. Electr. Power Energy Syst., Vol. 125, pp. 106517, 2021.
  • U. P. Bhushan, R. K. Jarial, V. K. Jadoun, and A. Agarwal, “On condition monitoring aspects of in-service Power transformers using computational techniques,” in Advances in electromechanical technologies, Singapore: Springer, 2021, pp. 343–355.
  • J. Jiang, and G. Ma. Optical sensing in Power transformers. John Wiley & Sons, Incorporated, 2020.
  • M. E. A. Senoussaoui, M. Brahami, and I. Fofana, “Transformer Oil quality assessment using random forest with feature engineering,” Energies, Vol. 14, no. 7, pp. 1809, 2021.
  • B. Moradi, H. Zare Maivan, M. Seyed Hashtroudi, M. Sorahinobar, and J. Rohloff, “Physiological responses and phytoremediation capability of avicennia marina to oil contamination,” Acta Physiol. Plant., Vol. 43, no. 2, pp. 1–12, 2021.
  • M. Srivastava, S. K. Goyal, and A. Saraswat, “Ester oil as an alternative to mineral transformer insulating liquid,” Materials Today: Proceedings, Vol. 43, pp. 2850–2854, 2021.
  • W. Pi, et al., “Fault current characteristics of parallel stainless steel & REBCO tapes and a 6 kV/400 V HTS transformer,” IEEE Trans. Appl. Supercond. (2021).
  • T. M. Carpenter, D. M. Cowell, H. R. Clegg, J. R. McLaughlan, and S. Freear, “High-Power gallium nitride HIFU transmitter with integrated real-time current and voltage measurement,” IEEE Trans. Biomed. Circuits Syst. (2021).
  • M. Zand, M. A. Nasab, S. Padmanaban, and M. Khoobani, “Big data for SMART Sensor and intelligent Electronic devices–Building application,” in Smart buildings digitalization, CRC Press, 2021, pp. 11–28.
  • J. Liu, H. Zhang, X. Fan, Y. Zhang, and C. Zhang, “Aging evaluation for transformer oil-immersed cellulose insulation by using frequency dependent dielectric modulus technique,” Cellulose, Vol. 28, no. 4, pp. 2387–2401, 2021.
  • Z. Taghikhani, M. A. Taghikhani, and G. B. Gharehpetian, “A comprehensive investigation on the efficiency of alumina nanoparticles in ONAN and OFAN cooling performance enhancement of transformers,” Powder Technol. (2021).
  • A. C. I. U. Ancuta-Mihaela, M. C. Nitu, M. Nicola, C. I. Nicola, and F. Lăzărescu, “Complementary analysis of the degree of polymerization based on chemical markers 2-furaldehyde and methanol using the fuzzy logic,” in 2020 21st International Symposium on Electrical Apparatus & Technologies (SIELA). IEEE, 2020.
  • S. Y. Matharage, Q. Liu, Z. Wang, and D. Walker, “Effect of paper type and water content in paper on the partitioning of 2-FAL between liquid and paper insulations,” in 2020 IEEE International Conference on High Voltage Engineering and Application (ICHVE). IEEE, 2020.
  • A. Ritonga, “Effects of thermal aging on the characteristics of Kraft paper in various liquid Insulating materials,” in 2020 International Symposium on Electrical Insulating Materials (ISEIM). IEEE, 2020.
  • N. D. Jacob, B. Kordi, and S. S. Sherif, “Assessment of power transformer paper ageing using wavelet texture analysis of microscopy images,” IEEE Trans. Dielectr. Electr. Insul., Vol. 27, no. 6, pp. 1898–1905, 2020.
  • S. S. Ghoneim, “Determination of transformers’ insulating paper state based on classification techniques,” Processes, Vol. 9, no. 3, pp. 427, 2021.
  • G. Lu, and P. Zhang, “A novel leakage-current-based online insulation monitoring Strategy for converter transformers using common-mode and differential-mode harmonics in VSC system,” IEEE Trans. Ind. Electron., Vol. 68, no. 2, pp. 1636–1645, 2020.
  • I. Daminov, A. Prokhorov, R. Caire, and M. C. Alvarez-Herault, “Assessment of dynamic transformer rating, considering current and temperature limitations,” Int. J. Electr. Power Energy Syst., Vol. 129, pp. 106886, 2021.
  • Y. Zhang, et al., “A prediction model of Hot spot temperature for split-windings traction transformer considering the load characteristics,” IEEE. Access., Vol. 9, pp. 22605–22615, 2021.
  • P. Dehghanian, and T. J. Overbye, “Temperature-Triggered failure hazard mitigation of transformers Subject to geomagnetic disturbances,” in 2021 IEEE Texas Power and Energy Conference (TPEC). IEEE, 2021.
  • Y. Wang, S. Fang, Z. Wei, and X. Zhang, “Research on transformer Cooling Control Strategy based on Hot spot temperature calculation,” in 2021 IEEE 5th Advanced Information Technology, Electronic and Automation Control Conference (IAEAC). Vol. 5. IEEE, 2021.
  • A. Subramaniam, J. Saha, O. J. Xie, and S. K. Panda, “Marine transformer lifespan estimation by hotspot temperature measurements,” in 2020 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES). IEEE, 2020.
  • D. P. Rommel, D. Di Maio, and T. Tinga, “Transformer hot spot temperature prediction based on basic operator information,” Int. J. Electr. Power Energy Syst., Vol. 124, pp. 106340, 2021.
  • J. Zhu, et al., “A novel suppression method for grounding transformer against earth current from urban rail transit,” IEEE Trans. Ind. Electron. (2020).
  • S. H. H. Kazmi, T. Laneryd, K. Giannikas, S. F. Ahrenfeldt, T. S. Sørensen, T. H. Olesen, and J. Holbøll, “Cost optimized dynamic design of offshore windfarm transformers with reliability and contingency considerations,” Int. J. Electr. Power Energy Syst., Vol. 128, pp. 106684, 2021.
  • A. Glowacz, “Thermographic Fault diagnosis of ventilation in BLDC motors,” Sensors, Vol. 21, pp. 7245, 2021.
  • A. Glowacz, “Ventilation diagnosis of angle grinder using thermal imaging,” Sensors, Vol. 21, pp. 2853, 2021.
  • Glowacz, Adam. “Fault diagnosis of electric impact drills using thermal imaging.” Measurement. (Mahwah. N. J) 171 (2021): 108815.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.