204
Views
1
CrossRef citations to date
0
Altmetric
Review Article

Investigation on Torque Sharing Function for Torque Ripple Minimization of Switched Reluctance Motor: A Flower Pollination Algorithm Based Approach

ORCID Icon, ORCID Icon & ORCID Icon

References

  • M. V. de Paula, T. A. S. Barros, H. S. Moreira, E. O. H. Catata, M. G. Villalva, and E. R. Filho, “A Dahlin Cruise control design method for switched reluctance motors with minimum torque ripple point tracking applied in electric vehicles,” IEEE Trans. Transp. Electrific., Vol. 7, no. 2, pp. 730–740, June 2021. DOI:10.1109/TTE.2020.3019997.
  • S. K. Sahoo, S. Dasgupta, S. K. Panda, and J. X. Xu, “A Lyapunov function based Robust direct torque controller for switched reluctance motor drive system,” IEEE Trans. Power Electr., Vol. 27, pp. 555–564, Feb. 2012.
  • V. P. Vujicic, “Minimization of torque ripple and copper losses in switched reluctance drive,” IEEE Trans. Power Electr., Vol. 27, no. 1, pp. 388–399, Jan. 2012.
  • A. Manjula, L. Kalaivani, and M. Gengaraj, “PSO based torque ripple minimization of switched reluctance motor using FPGA controller,” Intell. Autom. Soft Comput., Vol. 29, no. 2, pp. 451–465, 2021.
  • J. Ye, B. Bilgin, and A. Emadi, “An extended-speed low-ripple torque control of switched reluctance motor drives,” IEEE Trans. Power Electron., Vol. 30, no. 3, pp. 1457–1470, Mar. 2015.
  • S. Y. Ahn, J. W. Ahn, and D. H. Lee. “A novel torque controller design for high speed SRM using negative torque compensator,” in 8th International Conference on Power Electronics-ECCE, Asia, 2011, pp. 937–44.
  • T. Kojima, and R. W. De Doncker. “Optimal torque sharing in direct instantaneous torque control of switched reluctance motors,” in 2015 IEEE Energy Conversion Congress and Exposition (ECCE), pp. 327–33.
  • M. Gengaraj, L. Kalaivani, K. Koodammal, M. Krishnashini, L. Aniana, and S. D. Prithi. “A comprehensive study of multilevel inverter fed switched reluctance motor for torque ripple minimization with multicarrier PWM strategies,” in 2018 4th International Conference on Electrical Energy Systems (ICEES), 2018, pp. 1–7. DOI:10.1109/ICEES.2018.8443280.
  • M. Dowlatshahi, S. M. S. Nejad, and J. W. Ahn. “Torque ripple minimization of switched reluctance motor using modified torque sharing function,” in 2013 21st Iranian Conference on Electrical Engineering (ICEE), pp. 1–6.
  • A. K. Rana, and A. V. R. Teja, “A mathematical torque ripple minimization technique ASED on a nonlinear modulating factor for switched reluctance motor drives,” IEEE Trans. Ind. Electron., Vol. 69, no. 2, pp. 1356–1366, Feb. 2022. DOI:10.1109/TIE.2021.3063871.
  • Z. Xia, B. Bilgin, S. Nalakath, and A. Emadi, “A new torque sharing function method for switched reluctance machines with lower current tracking error,” IEEE Trans. Ind. Electron., Vol. 68, no. 11, pp. 10612–10622, Nov. 2021. DOI:10.1109/TIE.2020.3037987.
  • C. Gan, Y. Chen, Q. Sun, J. Si, J. Wu, and Y. Hu, “A position sensorless torque control strategy for switched reluctance machines with fewer current sensors,” IEEE/ASME Trans. Mechatr., Vol. 26, no. 2, pp. 1118–1128, April 2021. DOI:10.1109/TMECH.2020.3017864.
  • S. Song, R. Hei, R. Ma, and W. Liu, “Model predictive control of switched reluctance starter/generator with torque sharing and compensation,” IEEE Trans. Transp. Electrific., Vol. 6, no. 4, pp. 1519–1527, Dec. 2020. DOI:10.1109/TTE.2020.2975908.
  • H. Li, B. Bilgin, and A. Emadi, “An improved torque sharing function for torque ripple reduction in switched reluctance machines,” IEEE Trans. Power Electron., Vol. 34, no. 2, pp. 1635–1644, Feb. 2019. DOI:10.1109/TPEL.2018.2835773.
  • H. Kotb, A. H. Yakout, M. A. Attia, R. A. Turky, and K. M. AboRas, “Speed control and torque ripple minimization of SRM using local unimodal sampling and spotted hyena algorithms based cascaded PID controller,” Ain Shams Eng. J., Vol. 13, no. 4, pp. 101719, 2022. DOI:10.1016/j.asej.2022.101719.
  • M. Xu, G. Liu, Q. Chen, J. Ji, and W. Zhao, “Design and optimization of a fault tolerant modular permanent magnet assisted synchronous reluctance motor with torque ripple minimization,” IEEE Trans. Indus. Electr., Vol. 68, no. 9, pp. 8519–8530, Sept. 2021. DOI:10.1109/TIE.2020.3016263.
  • H. Li, B. Bilgin, and A. Emadi, “An improved torque sharing function for torque ripple reduction in switched reluctance machines,” IEEE Trans. Power Electron., Vol. 34, no. 2, pp. 1635–1644, Feb. 2019. DOI:10.1109/TPEL.2018.2835773.
  • H. Kotb, A. H. Yakout, M. A. Attia, R. A. Turky, and K. M. AboRas, “Speed control and torque ripple minimization of SRM using local unimodal sampling and spotted hyena algorithms based cascaded PID controller,” Ain Shams Eng. J., Vol. 13, no. 4, pp. 101719, 2022. DOI:10.1016/j.asej.2022.101719.
  • M. Xu, G. Liu, Q. Chen, J. Ji, and W. Zhao, “Design and optimization of a fault tolerant modular permanent magnet assisted synchronous reluctance motor with torque ripple minimization,” IEEE Trans. Ind. Electron., Vol. 68, no. 9, pp. 8519–8530, Sept. 2021. DOI:10.1109/TIE.2020.3016263.
  • R. Mikail, I. Husain, Y. Sozer, M. S. Islam, and T. Sebastian, “Torque ripple minimization of switched reluctance machines through current profiling,” IEEE Trans. Indus. Appl., Vol. 49, no. 3, pp. 1258–1267, May 2013.
  • V. P. Vujicic, “Minimization of torque ripple in switched reluctance motor drives,” IEEE Trans. Power Electr., Vol. 27, no. 1, pp. 388–399, Jan. 2012.
  • A. Manjula, L. Kalaivani, M. Gengaraj, R. V. Maheswari, S. Vimal, and S. Kadry, “Performance enhancement of SRM using smart bacterial foraging optimization algorithm based speed and current PID controllers,” Comput. Electr. Eng., Vol. 95, pp. 107398, 2021. DOI:10.1016/j.compeleceng.2021.10739.
  • A. Xu, C. Shang, J. Chen, J. Zhu, and L. Han, “A new control method based on DTC and MPC to reduce torque ripple in SRM,” IEEE Access, Vol. 7, pp. 68584–68593, 2019. DOI:10.1109/ACCESS.2019.2917317.
  • M. Zhang, I. Bahri, X. Mininger, C. Vlad, and E. Berthelot, “Vibration reduction control of switched reluctance machine,” IEEE Trans. Energy Convers., Vol. 34, no. 3, pp. 1380–1390, Sept. 2019. DOI:10.1109/TEC.2019.2908458.
  • M. Kawa, K. Kiyota, J. Furqani, and A. Chiba, “Acoustic noise reduction of a high-efficiency switched reluctance motor for hybrid electric vehicles with novel current waveform,” IEEE Trans. Indus. Appl., Vol. 55, no. 3, pp. 2519–2528, May-June 2019. DOI:10.1109/TIA.2018.2888847.
  • J. Ye, B. Bilgin, and A. Emadi, “An offline torque sharing function for torque ripple reduction in switched reluctance motor drives,” IEEE Trans. Energy Convers., Vol. 30, no. 2, pp. 726–735, Jun. 2015.
  • H. A. Maksoud, “Torque ripple minimization of a switched reluctance motor using a torque sharing function based on the overlap control technique,” Eng. Technol. Appl. Sci. Res., Vol. 10, no. 2, pp. 5371–5376, Apr. 2020.
  • O. Üstün, and M. Önder, “An improved torque sharing function to minimize torque ripple and increase average torque for switched reluctance motor drives,” Electr. Power Compon. Syst., Vol. 48, no. 6-7, pp. 667–681, Aug. 2020.
  • J. Ye, B. Bilgin, and A. Emadi, “An extended-speed low-ripple torque control of switched reluctance motor drives,” IEEE Trans. Power Electr., Vol. 30, no. 3, pp. 1457–1470, Apr. 2014.
  • X. S. Yang, M. Karamanoglu, and X. S. He, “Flower pollination algorithm: A novel approach for multiobjective optimization,” Eng. Optim., Vol. 46, no. 9, pp. 1222–1237, Sep. 2014.
  • R. Storn, and K. Price, “Differential evolution – A simple and efficient heuristic for global optimization over continuous spaces,” J. Global Optimiz., Vol. 11, pp. 341–359, 1997. DOI:10.1023/A:1008202821328.
  • R. Rajesh, and S. N. Deepa, “Design of direct MRAC augmented with 2 DoF PIDD controller: An application to speed control of a servo plant,” J. King Saud Univ. Eng. Sci., Vol. 32, no. 5, pp. 310–320, Jul.2020.
  • R. Rajesh, “Optimal tuning of FOPID controller based on PSO algorithm with reference model for a single conical tank system,” SN Appl. Sci., Vol. 1, no. 7, pp. 1–14, Jul. 2019.
  • R. Ramakrishnan, and D. Subramaniam Nachimuthu, “Design of state feedback LQR based dual mode fractional-order PID controller using inertia weighted PSO algorithm: For control of an underactuated system,” J. Inst. Eng., Vol. 102, no. 6, pp. 1403–1417, Dec. 2021.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.