149
Views
4
CrossRef citations to date
0
Altmetric
Control Engineering

Design and Development of a Low-Cost Vision-Based 6 DoF Assistive Feeding Robot for the Aged and Specially-Abled People

ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon

REFERENCES

  • BBC, “Robot arm can feed people with mobility issues.” https://www.bbc.com/news/av/technology-47723167 (accessed Dec 20, 2021).
  • P. Rashidi and A. Mihailidis, “A survey on ambient-assisted living tools for older adults,” IEEE. J. Biomed. Health. Inform., Vol. 17, no. 3, pp. 579–590, 2013. DOI: 10.1109/JBHI.2012.2234129
  • WIRED, “An ice cream geek reinvents the scoop so it won’t snap your wrist.” https://www.wired.com/2013/11/ice-cream-scoop (accessed Dec 18, 2021).
  • C. Jacobsson, K. Axelsson, P. O. Österlind, and A. Norberg, “How people with stroke and healthy older people experience the eating process,” J. Clin. Nurs., Vol. 9, no. 2, pp. 255–264, 2000. DOI: 10.1046/j.1365-2702.2000.00355.x
  • F. Liu, H. Yu, W. Wei, and C. Qin, “I-Feed: A robotic platform of an assistive feeding robot for the disabled elderly population,” Technol. Health Care, Vol. 28, no. 4, pp. 425–429, 2020. DOI: 10.3233/THC-202320
  • J. Kim, et al., “Companion robots for older adults: Rodgers’ evolutionary concept analysis approach,” Intell. Serv. Robot., Vol. 14, no. 5, pp. 729–739, 2021. DOI: 10.1007/s11370-021-00394-3
  • M. Chen, C. Liu, and G. Du, “A human–robot interface for mobile manipulator,” Intell. Serv. Robot., Vol. 11, no. 3, pp. 269–278, 2018. DOI: 10.1007/s11370-018-0251-3
  • W. C. Cheng, H. C. Hsiao, and C. Y. Chung, “Implementation of ROS-based feeding robot system with intention detection,” in 2020 Int. Autom. Control Conf. CACS 2020, 2020. DOI: 10.1109/CACS50047.2020.9289772
  • K. Young, S. L. Cheng, C. H. Ko, and H. W. Tsou, “Development of a comfort-based motion guidance system for a robot walking helper,” J. Intell. Robot. Syst. Theory Appl., Vol. 100, no. 2, pp. 379–388, 2020. DOI: 10.1007/s10846-020-01168-2
  • T. Shen, M. R. Afsar, H. Zhang, C. Ye, and X. Shen, “A 3D computer vision-guided robotic companion for non-contact human assistance and rehabilitation,” J. Intell. Robot. Syst. Theory Appl., Vol. 100, no. 3-4, pp. 911–923, 2020. DOI: 10.1007/s10846-020-01258-1
  • P. W. Oliveira, G. A. Barreto, and G. A. P. Thé, “A general framework for optimal tuning of PID-like controllers for minimum jerk robotic trajectories,” J. Intell. Robot. Syst. Theory Appl., Vol. 99, no. 3-4, pp. 467–486, 2020. DOI: 10.1007/s10846-019-01121-y
  • N. Gupta, P. Mittal, S. D. Roy, S. Chaudhury, and S. Banerjee, “Developing a gesture-based interface,” IETE J. Res., Vol. 48, no. 3-4, pp. 237–244, 2002. DOI: 10.1080/03772063.2002.11416282
  • A. L. Kaczmarek, “3D vision system for a robotic arm based on equal baseline camera array,” J. Intell. Robot. Syst. Theory Appl., Vol. 99, no. 1, pp. 13–28, 2020. DOI: 10.1007/s10846-019-01117-8
  • E. Kristiansen, E. K. Nielsen, L. Hansen, and D. Bourne, “A novel strategy for automatic error classification and error recovery for robotic assembly in flexible production,” J. Intell. Robot. Syst. Theory Appl., Vol. 100, no. 3-4, pp. 863–877, 2020. DOI: 10.1007/s10846-020-01248-3
  • P. A. Parikh, K. D. Joshi, and R. Trivedi, “Vision based trajectory planning for a five DOF feeding robot using linear segment parabolic blend and cycloid functions.Pdf,” in Mechatronics and machine Vision in practice 4; Springer Nature: Switzerland AG 2021, 2021. DOI: 10.1007/978-3-030-43703-9_16
  • S. Mittal, M. P. Dave, and A. Kumar, “Comparison of techniques for disturbance-tolerant position control of the manipulator of PUMA robot using PID,” Indian J. Sci. Technol., Vol. 9, no. 45, pp. 1–11, 2016. DOI: 10.17485/ijst/2016/v9i45/102274
  • P. J. Escamilla-Ambrosio, and N. Mort, “Auto-tuning of fuzzy PID controllers,” IFAC Proc. Vol., Vol. 35, no. 1, pp. 169–174, 2002. DOI: 10.3182/20020721-6-es-1901.00681
  • A. Saxena, Y. M. Dubey, M. Kumar, and A. Saxena, “Performance comparison of ANFIS, FOPID-PSO and FOPID-fuzzy tuning methodology for optimizing response of high-performance drilling machine,” IETE J. Res., pp. 1–14, 2021. DOI: 10.1080/03772063.2021.1933625
  • R. Kaur and J. Ohri, “Novel approach to optimal preview control of DC motor using evolutionary algorithms,” IETE J. Res., Vol. 68, no. 2, pp. 883–901, 2022. DOI: 10.1080/03772063.2019.1627914
  • S. K. Gupta and P. Varshney, “Fractional Fuzzy PID Controller for Speed Control of DC Motor,” in Proc. - 2013 3rd Int. Conf. Adv. Comput. Commun. ICACC 2013, 2013, pp. 1–4. DOI: 10.1109/ICACC.2013.7
  • Z. Bingül and O. Karahan, “Fractional PID controllers tuned by evolutionary algorithms for robot trajectory control,” Turkish J. Electr. Eng. Comput. Sci., Vol. 20, no. Suppl. 1, pp. 1123–1136, 2012. DOI: 10.3906/elk-1102-1011
  • C. T. Chao, N. Sutarna, J. S. Chiou, and C. J. Wang, “An optimal fuzzy PID controller design based on conventional PID control and nonlinear factors,” Appl. Sci., Vol. 9, no. 6, 2019, 1224. DOI: 10.3390/app9061224
  • J. O. Salim, “Fuzzy based PID controller for speed control of D.C. motor using LabVIEW,” WSEAS Trans. Syst. Control, Vol. 10, pp. 154–159, 2015.
  • I. H. Usoro, U. T. Itaketo, and M. A. Umoren, “Control of a DC motor using fuzzy logic control algorithm,” Niger. J. Technol., Vol. 36, no. 2, pp. 594, 2017. DOI: 10.4314/njt.v36i2.35
  • D. Xie, J. Q. Zhu, and F. Wang, “Fuzzy PID control to feed servo system of CNC machine tool,” Procedia Eng., Vol. 29, pp. 2853–2858, 2012. DOI: 10.1016/j.proeng.2012.01.403
  • S. Das, I. Pan, S. Das, and A. Gupta, “A novel fractional order fuzzy PID controller and Its optimal time domain tuning based on integral performance indices,” Eng. Appl. Artif. Intell., Vol. 25, no. 2, pp. 430–442, 2012. DOI: 10.1016/j.engappai.2011.10.004
  • P. Ravi Kumar and V. Naga Babu, “Position control of servo systems using PID controller tuning with soft computing optimization techniques,” Int. J. Eng. Res. Technol., Vol. 3, no. 11, pp. 976–980, 2014.
  • M. Reza and A. Nemati, “On fractional-order PID design,” Appl. MATLAB Sci. Eng., 2011. DOI: 10.5772/22657
  • Z. Li, L. Liu, S. Dehghan, Y. Q. Chen, and D. Xue, “A review and evaluation of numerical tools for fractional calculus and fractional order controls,” Int. J. Control, Vol. 90, no. 6, pp. 1165–1181, 2017. DOI: 10.1080/00207179.2015.1124290
  • I. Chiha, N. Liouane, and P. Borne, “Tuning PID controller using multiobjective ant colony optimization,” Appl. Comput. Intell. Soft Comput., Vol. 2012, no. 1, pp. 1–7, 2012. DOI: 10.1155/2012/536326
  • K. Singh, P. Vasant, I. Elamvazuthi, and R. Kannan, “PID tuning of servo motor using bat algorithm,” Procedia Comput. Sci., Vol. 60, no. 1, pp. 1798–1808, 2015. DOI: 10.1016/j.procs.2015.08.290
  • Y. Huang and H. Hu, “Design of fractional order PID controller based on artificial immune algorithm,” Adv. Mater. Res., Vol. 268-270, pp. 1061–1066, 2011. DOI: 10.4028/www.scientific.net/AMR.268-270.1061
  • R. H. Mohammed, F. Bendary, and K. Elserafi, “Trajectory tracking control for robot manipulator using fractional order-fuzzy-PID controller,” Int. J. Comput. Appl., Vol. 134, no. 15, pp. 22–29, 2016. DOI: 10.5120/ijca2016908155
  • J. Perez, J. P. Perez, R. Soto, A. Flores, F. Rodriguez, and J. L. Meza, “Trajectory tracking error using PID control law for two-link robot manipulator via adaptive neural networks,” Procedia Technol., Vol. 3, no. 81, pp. 139–146, 2012. DOI: 10.1016/j.protcy.2012.03.015
  • A. Kharidege, D. Jianbiao, and Y. Zhang, “Performance study of PID and fuzzy controllers for position control of 6 DOF arm manipulator with various defuzzification strategies,” MATEC Web Conf., Vol. 77, pp. 3–8, 2016. DOI: 10.1051/matecconf/20167701011
  • Z. Dachang, D. Baolin, Z. Puchen, and C. Shouyan, “Constant force PID control for robotic manipulator based on fuzzy neural network algorithm,” Complexity, Vol. 2020, pp. 1–11, 2020. DOI: 10.1155/2020/3491845
  • P. Sarkhel, N. Banerjee, and N. B. Hui, “Fuzzy logic-based tuning of PID controller to control flexible manipulators,” SN Appl. Sci., Vol. 2, no. 6, pp. 1–11, 2020. DOI: 10.1007/s42452-020-2877-y
  • P. A. Parikh, R. Trivedi, and J. Dave, “Trajectory planning for the five degree of freedom feeding robot using septic and nonic functions,” Int. J. Mech. Eng. Robot. Res., Vol. 9, no. 7, pp. 1043–1050, 2020. DOI: 10.18178/ijmerr.9.7.1043-1050
  • P. A. Parikh, R. R. Trivedi, and K. D. Joshi, “Trajectory planning of a 5 DOF feeding serial manipulator using 6th order polynomial method,” J. Phys. Conf. Ser., Vol. 1921, no. 1, 2021. DOI: 10.1088/1742-6596/1921/1/012088
  • S. Fang, X. Ma, Y. Zhao, Q. Zhang, and Y. Li, “Trajectory planning for seven-DOF robotic arm based on quintic polynormial,” in Proc. - 2019 11th Int. Conf. Intell. Human-Machine Syst. Cybern. IHMSC 2019, 2019, 2 (Caai), pp. 198–201. DOI: 10.1109/IHMSC.2019.10142
  • Assistive Innovations, no title. https://www.assistive-innovations.com/en/ (accessed Sep 18, 2021).
  • Robotnik, no title. https://robotnik.eu/nuevo-brazo-robotico-kinova-mico/ (accessed Jul 6, 2021).
  • Obi, no title, eetobi.com. (accessed Jul 6, 2021).
  • K. Singh, S. P. Singh, G. Kaur, and K. Bose, “Comparison of age-related anthropometric changes among elderly punjabi males residing in old-age homes with those residing with their families,” J. Anthropol. Surv. India, Vol. 69, no. 1, pp. 102–116, 2020. DOI: 10.1177/2277436X20905923
  • J. J. Craig, “Book review: Introduction to robotics: Mechanics and control,” Int. J. Electr. Eng. Educ., Vol. 41, no. 4, pp. 388, 2004. DOI: 10.7227/ijeee.41.4.11
  • H. S. An, T. W. Seo, and J. W. Lee, “Generalized solution for a sub-problem of inverse kinematics based on product of exponential formula,” J. Mech. Sci. Technol., Vol. 32, no. 5, pp. 2299–2307, 2018. DOI: 10.1007/s12206-018-0441-0
  • L. Wu, R. Crawford, and J. Roberts, “An analytic approach to converting POE parameters into D-H parameters for serial-link robots,” IEEE Robot. Autom. Lett., Vol. 2, no. 4, pp. 2174–2179, 2017. DOI: 10.1109/LRA.2017.2723470
  • K. M. Lynch and F. Park, Modern Robotics -Mechanics, Planning, and Control. United Kingdom: Cambridge University Press, 2017.
  • X. Wang, D. Zhang, C. Zhao, H. Zhang, and H. Yan, “Singularity analysis and treatment for a 7R 6-DOF painting robot with non-spherical wrist,” Mech. Mach. Theory, Vol. 126, pp. 92–107, 2018. DOI: 10.1016/j.mechmachtheory.2018.03.018
  • OMNIVISION, no title. https://www.ovt.com/products/ov09282-ga4a/
  • Intel-RealSense-D400-Series-Datasheet-August-2021.Pdf
  • E. Tsykunov, V. Ilin, S. Perminov, A. Fedoseev, and E. Zainulina, Coupling of localization and depth data for mapping using Intel RealSense T265 and D435i Cameras. 2020.
  • S. M. Renuka Devi and A. Akula, “Detection of similar objects and localizing on each using depth camera,” in Proc. 2nd Int. Conf. Inven. Res. Comput. Appl. ICIRCA 2020, 2020, pp. 625–9. DOI: 10.1109/ICIRCA48905.2020.9182902
  • J. C. K. Chow, K. D. Ang, D. D. Lichti, and W. F. Teskey, “Performance analysis of a low-cost triangulation-based 3D camera: Microsoft kinect system,” Int. Arch. Photogramm. Remote Sens. Spat. Inf. Sci., Vol. XXXIX-B5, pp. 175–180, 2012. DOI: 10.5194/isprsarchives-xxxix-b5-175-2012
  • A. Tepljakov, E. Petlenkov, and J. Belikov, “FOMCON: Fractional-order modeling and control toolbox for MATLAB,” in Proc. 18th Int. Conf. - Mix. Des. Integr. Circuits Syst. Mix. 2011, 2011, No. March 2015, pp. 684–9.
  • H. Afrisal, A. L. Hakim, M. J. F. Shiddiq, and I. Setiawan, “Position control and trajectory planning of 3-DOF arm manipulator for test tube handling,” in 2019 Int. Biomed. Instrum. Technol. Conf. IBITeC 2019, 2019, pp. 52–7. DOI: 10.1109/IBITeC46597.2019.9091714
  • D. Cekus, B. PosiadaŁa, and P. Warys, “Integration of modeling in solidworks and matlab/simulink environments,” Arch. Mech. Eng., Vol. 61, no. 1, pp. 57–74, 2014. DOI: 10.2478/meceng-2014-0003

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.