REFERENCES
- Schey , J. A. , “ Metal Deformation Processes: Friction and Lubrication ,” Marcel Dekker Inc. , New York , N.Y. , 1970 .
- Polakowski , N. H. , “ The Compression Test in Relation to Cold Rolling ,” J. Iron Steel Inst. , 163 , 250 ( 1949 ).
- Saul , G. , Male , A. T. , and DePierre , V. , “ A New Method for the Determination of Material Flow Stress Values under Metal-working Conditions ,” U.S. Air Force Materials Laboratory Technical Report No. AFML-TR-70-19 (January 1970 ).
- Male , A. T. , and Cockcroft , M. G. , “ A Method for the Determination of the Coefficient of Friction of Metals under Conditions of Bulk Plastic Deformation ,” J. Inst. Metals , 93 , 38 ( 1964–65 ).
- Avitzur , B. , “ Metal Forming—Processes and Analysis ,” McGraw-Hill Inc., New York, N. Y. ( 1968 ).
- Burgdorf , M. , “ Use of the Ring Compression Test for Determination of Friction Coefficient for Procedures of Massive Deformation ,” Industrie Anzeiger , 89 , 799 ( 1967 ).
- Male , A. T. , and DePierre , V. , “ The Mathematical Calibration of the Ring Test for Friction Studies in Flat Forging Operations ,” Proc. 10th Int. Machine Tool Design and Research Conf. , Univ. of Manchester , England (September 1969 ).
- DePierre , V. , and Male , A. T. , “ Mathematical Calibration of the Ring Test for Friction Studies in Flat Forging Operations ,” U.S. Air Force Materials Laboratory Technical Report No. AFML-TR-69-28 (October 1969 ).
- DePierre , V. , Saul , G. , and Male , A. T. , “ The Relative Validity of Coefficient of Friction and Interface Friction Shear Factor for Use in Metal Deformation Studies ,” U.S. Air Force Materials Laboratory Technical Report No. AFML-TR-70-243 (October 1970 ).
- Male , A. T. , Gurney , F. J. , and Jones , T. E. , “ The Evaluation of Glasses as Forging Lubricants ,” U.S. Air Force Materials Laboratory Technical Report No. AFML-TR-71-83 (April 1971 ).
- Male , A. T. , “ The Determination of Coefficients of Friction during Compressive Deformation ,” Report 8 , Inst. Mech. Eng. Symposium “Experimental Methods in Tribology,” London , England (March 1968 ).
- Male , A. T. , and DePierre , V. , “ The Use of the King Compression Test for Defining Realistic Metal Processing Parameters ,” U.S. Air Force Materials Laboratory Technical Report No. AFML-TR-70-129 (June 1970 ).
REFERENCES
- Towle , L. C. , J. Appl. Phys. 42 , 2368 , ( 1971 ).