A Mixed Lubrication Model for Cold Rolling of Metals

REFERENCES

• von Karman , T. , “ On the Theory of Rolling ,” Z Angew Math. Mech. , 5 , 130 – 141 ( 1925 ).
   Google Scholar
• Whitton , P. W. and Ford , H. , “ Surface Friction and Lubrication in Cold Strip Rolling ,” Proc. Instn. Mech. Engrs. , 169 , 123 – 140 ( 1955 ).
   Google Scholar
• Roberts , W. L. , “ Computing the Coefficient of Friction in the Roll Bite from Mill Data ,” Blast Furnace and Steel Plant , 499 – 508 ( 1967 ).
   Google Scholar
• Kondo , S. , “ An Improvement of Rolling Stability During Cold Rolling of Aluminum ,” ASME Paper No. 74-LubS-9 .
   Google Scholar
• Nadai , A. , “ The Force Required for Rolling Steel Strip under Tension ,” J. of Applied Mechanics , 6 , A54 –A62 ( 1939 ).
   Google Scholar
• Cheng , H. S. , “ Plastohydrodynamic Lubrication ,” Friction and Lubrication in Metal Processing , ASME Book , 1966 , pp. 69 – 89
   Google Scholar
• Dow , T. A. , Kannel , J. W. , and Bupara , S. S. , “ A Hydrodynamic Lubrication Theory for Strip Rolling Including Thermal Effect ,” ASME Paper No. 74-LubS-8 .
   Google Scholar
• Avitzur , B. and Grossman , G. , “ Hydrodynamic Lubrication in Rolling of Thin Strips ,” J. of Engineering for Industry , 317 – 328 ( 1972 ).
   Google Scholar
• Schey , J. A. , “ Metal Deformation Processes—Friction and Lubrication ,” Marcel Dekker, Inc. , New York , 1970 .
   Google Scholar
• Greenwood , J. A. , “ The Area of Contact between Rough Surfaces and Flats ,” J. of Lubrication Technology , 89 , 81 ( 1967 ).
   Google Scholar
• Bell , J. C. and Dyson , A. , “ Mixed Friction in an Elastohydrodynamic System ,” Elastohydrodynamic Lubrication Symposium , Institute of Mechanical Engineers , 1972 , pp. 68 – 76
   Google Scholar
• Tsao , Y. H. and Tong , K. N. , “ A Model for Mixed Lubrication ,” ASLE Transactions , 18 , 90 – 96 ( 1975 ).
   Google Scholar
• Wilson , W. R. D. and Walowit , J. A. , “ An Isothermal Hydro-dynamic Lubrication Theory for Strip Rolling with Front and Back Tension ,” Tribiology Convention , Institute of Mechanical Engineers , Paper No. C86/71 , pp. 164 – 172
   Google Scholar
• Rabinowicz , E. , “ Friction and Wear of Materials ,” John Wiley and Sons, Inc. , New York , 1965 .
   Google Scholar
• Dyachenko , P. E. , Tolkacheva , N. N. , Andrew , G. A. , and Karpova , T. M. , “ The Actual Contact Area between Touching Surfaces ,” translated by Consultants Bureau , New York , 1964 .
   Google Scholar
• Murthy , H. B. D. , and Raghaven , M. R. , “ The Real Area of Contact and Compliance of Rough Cylinder in Compression ,” Wear , 27 , 47 – 60 ( 1974 ).
   Google Scholar
• Wilson , W. R. D. , and Mahdavian , S. M. , “ A Thermal Reynolds Equation and Its Application in the Analysis of Plasto-Hydrodynamic Inlet Zone. ” ASME Paper 73-Lub-35.
   Google Scholar
• Atkins , A. G. , “ Hydrodynamic Lubrication in Cold Rolling ,” Int. J. Mech. Sci. , 16 , 1 – 19 ( 1974 ).
   Web of Science ®Google Scholar
• Johnson , K. L. , Greenwood , J. A. , and Poon , S. Y. , “ A Simple Theory of Asperity Contact in Elastohydrodynamic Lubrication ,” Wear , 19 , 91 – 108 ( 1972 ).
   Web of Science ®Google Scholar
• Fein , R. S. and Kreutz , K. L. , discussion in “ Interdisciplinary Approach to Friction and Wear ,” NASA SP-181 , 1968 , pp. 356 – 365
   Google Scholar
• Hill , R. , “ The Mathematical Theory of Plasticity ,” Oxford University Press , 1950 .
   Google Scholar
• Hitchcock , J. H. , “ Elastic Deformation of Rolls during Cold-Rolling ,” Roll Neck Bearings , ASME Research Publication, 1935 , pp. 33 – 41
   Google Scholar
• Dowson , D. , and Higginson , G. R. , “ Elasto-hydrodynamic Lubrication ,” Pergammon Press , 1966 .
   Google Scholar
• Sargent , L. B. and Stawson , C. J. , “ Laboratory Evaluation of Lubricants for Cold Rolling Aluminum Alloys ,” Transactions of the ASME, Journal of Lubrication Technology , 96 , Series F, No. 4 , 617 – 620 630 (October 1974 ).
   Google Scholar