Dynamics of Solid Dispersions in Oil During the Lubrication of Point Contacts, Part II—Molybdenum Disulfide

REFERENCES

• Gansheimer , J. and Holinski , R. , “ Molybdenum Disulfide in Oils and Greases Under Boundary Conditions ,” J. Lubr. Technol., ASME Trans. , 95 , pp 242 – 248 ( 1973 ).
   Web of Science ®Google Scholar
• Stock , A. J. , “ Evaluation of Solid Lubricant Dispersions on a Four Ball Tester ,” Lubr. Eng. , 22 , pp 146 – 152 ( 1966 ).
   Google Scholar
• Bartz , W. J. and Muller , K. , “ Investigations on the Lubricating Effectiveness of Molybdenum Disulfide ,” Wear , 20 , pp 371 – 379 ( 1972 ).
   Google Scholar
• Gansheimer , J. and Holinski , R. , “ A Study of Solid Lubricants in Oils and Greases Under Boundary Conditions ,” Wear , 19 , 4 , pp 439 – 449 ( 1972 ).
   Google Scholar
• Thorp , J. M. , “ The Mechanism of Lubrication by Molybdenum Disulfide Dispersed in Oil and the Effect of a Zinc Dialkyldithiophosphate Additive ,” Wear , 23 , pp 63 – 70 ( 1973 ).
   Web of Science ®Google Scholar
• Holinski , R. , “ Lubrication Mechanism of Solid Lubricants in Oils ,” ASLE Trans. , 18 , pp 263 – 269 ( 1975 ).
   Google Scholar
• Herzig , H. L. , “ Effect of Solid Additives on Fluid Lubricants ,” Lubr. Eng. , 15 , pp 152 – 158 ( 1959 ).
   Google Scholar
• Barry , H. F. and Binkelman , J. P. , “ MoS2 Lubrication of Various Metals ,” Lubr. Eng. , 22 , pp 139 – 145 ( 1966 ).
   Google Scholar
• Rosenberg , R. C. and Campbell , W. E. , “ The Effect of Mechanically Dispersed Solid Powders on Wear Prevention by White Oil at High Load and Low Speeds ,” Lubr. Eng. , 24 , pp 92 – 98 ( 1968 ).
   Google Scholar
• Tsuya , Y. and Saito , K. , “ Effect of Viscosity of Oil Containing Molybdenum Disulfide on its Load-Carrying Capacity ,” Lubr. Eng. , 31 , pp 619 – 624 ( 1975 ).
   Google Scholar
• Bartz , W. J. , “ Solid Lubricant Additives—Effects of Concentration and Other Additives on Anti-Wear Performance ,” Wear , 17 , pp 421 – 432 ( 1971 ).
   Web of Science ®Google Scholar
• Bartz , W. J. , “ Some Investigation on the Influence of Particle Size on the Lubricating Effectiveness of Molybdenum Disulfide ,” ASLE Trans. , 15 , pp 207 – 215 ( 1972 ).
   Google Scholar
• Bartz , W. J. , “ Influence of Extreme Pressure and Detergent-Dispersant-Additives on the Lubricating Effectiveness of Molybdenum Disulfide ,” Lubr. Eng. , 33 , pp 139 – 145 ( 1977 ).
   Google Scholar
• Bartz , W. J. and Oppelt , J. , “ Lubricating Effectiveness of Oil-Soluble Additives and Molybdenum Disulfide Dispersed in Mineral Oil ,” Lubr. Eng. , 36 , pp 579 – 585 ( 1980 ).
   Google Scholar
• Scott , D. and Jamieson , D. , “ Molybdenum Disulfide as a Lubricant Additive in Rolling Contact—A Study of Compatability with Other Additives ,” J. Inst. Petrol. , 48 , pp 91 – 104 ( 1962 ).
   Google Scholar
• Sliney , H. E. , “ Dynamic of Solid Lubrication as Observed by Optical Microscopy ,” ASLE Trans. , 21 , pp 109 – 117 ( 1978 ).
   Google Scholar
• Cusano , C. and Sliney , H. E. , “ Dynamics of Solid Dispersions in Oil During the Lubrication of Point Contacts, Part I—Graphite ,” ASLE Preprint NO. 81-AM-5D-3 .
   Google Scholar
• Wedeven , L. D. , “ Traction and Film Thickness Measurements Under Starved Elastohydrodynamic Conditions ,” J. Lubr. Tech., ASME Trans. , 97 , pp 321 – 329 ( 1975 ).
   Web of Science ®Google Scholar