A Study of Surface Damage at Low-Amplitude Slip

REFERENCES

• Tomlinson , G. A. , “ The Rusting of Steel Surfaces in Contact ,” Proc. Royal Society (London) , 115A , pp 472 – 483 ( 1927 ).
   Google Scholar
• Halliday , J. S. and Hirst , W. , “ The Fretting Corrosion of Mild Steel ,” Proc. Royal Society (London) , 236A , pp 411 – 425 ( 1956 ).
   Google Scholar
• Ohmae , N. and Tsukizoe , T. , “ The Effect of Slip Amplitude on Fretting ,” Wear , 27 , pp 281 – 294 ( 1974 ).
   Google Scholar
• Waterhouse , R. B. , Fretting Corrosion , Pergamon Press , New York , ( 1972 ).
   Google Scholar
• Waterhouse , R. B. , “ Fretting Wear ,” Proc. 1981 Intl. Conf. , San Francisco , California , American Society of Mechanical Engineers, pp 17 – 22 ( 1981 ).
   Google Scholar
• Bill , R. C. , “ Review of Factors that Influence Fretting Wear ,” Materials Evaluations under Fretting Conditions , ASTM STP 780 , American Society for Testing and Materials , pp 165 – 182 ( 1982 ).
   Google Scholar
• Elliot , K. B. , Mabie , H. H. , Furey , M. J. , and Mitchell , L. D. , “ A Vibration Analysis of a Bearing Cartridge Interface for a Fretting Corrosion Study ,” ASME Preprint No. 82–LUB-19.
   Google Scholar
• Waterhouse , R. B. , “ Physics and Metallurgy of Fretting ,” AGARD Conf. Proc. No. 161 , National Technical Information Service , Springfield , Virginia ( 1974 ).
   Google Scholar
• Peterson , M. B. , Geren , B. F. , Arwas , E. B. , Gray , S. , Murray , S. F. , Lund , J. W. , and Ling , F. F. , “ Analytical and Experimental Investigation of Gas Bearing Tilting Pad Pivots ,” Mechanical Technology Incorporated, NASA CR 72609 (MTI TR-32) ( 1969 ).
   Google Scholar
• Hoeppner , D. W. , “ Fretting of Aircraft Control Surfaces ,” AGARD Conf. Proc. No. 161 , National Technical Information Service , Springfield , Virginia ( 1974 ).
   Google Scholar
• Bill , R. C. , “ Study on Fretting Wear in Titanium, Monel-400 and Colbolt-25 Percent Molybdenum ,” ASLE Trans. , 16 , 4 , p 286 ( 1973 ).
   Google Scholar
• Bill , R. C. , “ Fretting of AISI 9310 Steel and Selected Fretting-Resistant Surface Treatments ,” ASLE Trans. , 21 , 3 , p 236 ( 1978 ).
   Web of Science ®Google Scholar
• Bill , R. C. , “ Fretting Wear of Iron, Nickel and Titanium under Varied Environmental Conditions ,” AVRADCOM Research and Technology Laboratories, NASA Lewis Research Center, Cleveland, Ohio.
   Google Scholar
• Bill , R. C. , “ The Role of Oxidation in the Fretting Wear Process ,” AVRADCOM Research and Technologies Laboratory , NASA-Lewis Research Center, Cleveland , Ohio .
   Google Scholar
• Kennedy , P. J. , Peterson , M. B. , and Stallings , L. , “ An Evaluation of Fretting at Small Slip Amplitudes ,” Materials Evaluation under Fretting Conditions , ASTM STP 780 , American Society for Testing and Materials , pp 30 – 48 ( 1982 ).
   Google Scholar
• Winer , W. O. and Cheng , H. S. , “ Film Thickness, Contact Stress and Surface Temperature ,” The Wear Control Handbook , ASME , New York , pp 81 – 142 ( 1980 ).
   Google Scholar
• Deresiewicz , H. , “ Contact of Elastic Spheres under an Oscillating Torsional Couple ,” J. Applied Mech., Trans. ASME , 76 , pp 52 – 56 ( 1954 ).
   Google Scholar
• Mindlin , R. D. , “ Compliance of Elastic Bodies in Contact ,” J. Applied Mech., Trans. ASME , 71 , pp 259 – 268 ( 1949 ).
   Google Scholar
• Collins , J. A. , Failure of Materials in Mechanical Design , John Wiley and Sons , New York , p 482 ( 1981 ).
   Google Scholar