23
Views
7
CrossRef citations to date
0
Altmetric
Original Articles

The Influence of Temperature on the Lubricating Effectiveness of MoS2 Dispersed in Mineral Oils

, &
Pages 493-502 | Published online: 25 Mar 2008

REFERENCES

  • Gentle , C R. and Day , R S. , “ Effect of Some Antiwear Additives on The Elastohydrodynamic Lubrication of a Point Contact ,” Proc. 1972 Tribology Convention Inst. Mech. Eng. , London , pp 35 – 39 ( 1972 ).
  • Herzig , H L. “ Effect of Solid Additives on Fluid Lubricants ”, Lubr. Eng. , 15 , pp 152 – 158 ( 1959 ).
  • Rosenberg , R C. and Campbell , W E. , “ The Effect of Mechanically Dispersed Solid Powders on Wear Prevention by White Oil at High Loads and Low Speeds ,” Lubr. Eng. , 24 , pp 92 – 98 ( 1968 ).
  • Barry , H L. and Binkelman , J P. , “ MoS2 Lubrication of Various Metals ,” Lubr. Eng. , 22 , 4 , pp 139 – 145 ( 1966 ).
  • Gansheimer , J. and Holinski , R. , “ Molybdenum Disulfide in Oils and Greases Under Boundary Conditions ,” J. Lubr. Tech., ASME Trans. , 95 , Series F(2), pp 242 – 248 ( 1973 ).
  • Holinski , R. , “ Lubrication Mechanisms of Solid Lubricants in Oils ,” ASLE Trans. , 18 , 4 , pp 263 – 269 ( 1975 ).
  • Gansheimer , J. and Holinski , R. , “ A Study of Solid Lubricants in Oils ,” ASLE Trans. , 18 , 4 , pp 263 – 269 ( 1975 ).
  • Stock , A J. , “ Evaluation of Solid Lubricant Dispersions in a Four Ball Tester ,” Lubr. Eng. , 22 , pp 146 – 152 ( 1966 ).
  • Thorp , J H. , “ The Mechanism of Lubrication by Molybdenum Disulfide Dispersed in Oil and The Effect of a Zinc Dialkyldithiophosphate Additive ,” Wear , 23 , 1 , pp 63 – 70 ( 1973 ).
  • Bartz , W J. , “ Solid Lubricant Additives—Effects of Concentration and Other Additives on Anti-Wear Performance ,” Wear , 17 , pp 421 – 432 ( 1971 ).
  • Bartz , W J. , “ Some Investigation on the Influence of Particle Size in the Lubricating Effectiveness of Molybdenum Disulfide ,” ASLE Trans. , 15 , 3 , pp 207 – 215 ( 1972 ).
  • Bartz , W J. , “ Influence of Extreme Pressure and Detergent-Dispersant-Additives on the Lubricating Effectiveness of Molybdenum Disulfide ,” Lubr. Eng. , 33 , 3 , pp 139 – 145 ( 1977 ).
  • Bartz , W J. and Oppelt , J. , “ Lubricating Effectiveness of Oil-Soluble Additives and Molybdenum Disulfide Dispersed in Mineral Oil ,” Lubr. Eng. , 36 , 10 , pp 579 – 585 ( 1980 ).
  • Cusano , C. , Goglia , P R. , and Sliney , H E. , “ Surface Roughness Effects with Solid Lubricants Dispersed in Mineral Oils ”, ASLE Trans , 27 , 3 , pp 227 – 236 ( 1984 ).
  • Cusano , C. , Discussion of “Energy Saving Lubricants Containing Colloidal PTFE ,” Reick, F. G., Lubr. Engr. , 38 , 10 , pp 644 – 645 ( 1982 ).
  • Tsuya , Y. and Saito , K. , “ Effect of Viscosity of Oil Containing Molybdenum Disulfide on its Load-Carrying Capacity ,” Lubr. Eng. , 31 , 12 , pp 619 – 624 ( 1975 ).
  • Cheng , H S. , “ Application of Elastohydrodynamics to Rolling Element Bearings ,” ASME Paper No. 74-DE-32.
  • Groszek , A J. , “ Surface-Active Compounds in Lubricating Oils ,” Inst. of Petroleum , 47 , 453 , pp 295 – 306 September ( 1961 ).
  • Mair , B J. and White , J D. , “ Separation of Petroleum Hydrocarbons With Silica Gel ,” Research of the Natl. Bureau of Standards , 15 , Jul.—Aug. Research Paper RP809 ( 1935 ).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.