REFERENCES
- Cameron , A. and Gohar , R. , “ Theoretical and Experimental Studies of the Oil Film in Lubricated Point contract ,” Proc. Roy. Soc., London Series A , 291 , pp 520 – 536 ( 1966 ).
- Johnson , K L. and Roberts , A D. , “ Film Thickness Variation With Load in EHD Contact ,” Wear , 27 , 3 , p 391 ( 1974 ).
- Bell , J C. and Kannel , J W. , “ Aspects of Lubrication Affecting Life of Rolling Bearing ,” Metals Eng. Quarterly , pp 28 – 35 ( 1967 ).
- Dyson , A. , Naylor , H. , and Wilson , A R. , “ The Measurement of Oil-Film Thickness in Elastohydrodynamic Contacts ,” Symp. on Elastohydrodynamic Lubricants, Sept. 21-23 , 1965 , pp 76 – 92
- Hamilton , G M. and Moore , S E. , “ Deformation and Pressure in a Elastohydrodynamic Contact ,” Proc. Roy. Soc., London, Series A , 322 , pp 313 – 330 ( 1971 ).
- Kannel , J W. and Bell , J C. , “ Interpretation of the Thickness of Lubricant Films in Rolling Contact I. Examination of Measurements Obtained by X-RAYS ,” J. Lubr. Tech. Trans. ASME, Series F , 93 , 4 , pp 478 – 484 ( 1971 ).
- Parker , R J. and Kannel , J W. , “ Elastohydrodynamic Film Thickness Measurements with Advanced Ester Fluorocarbon and Polyphenyl Ether Lubricants to 589 K ,” NASA TN D-6608 , Dec. 1971 .
- Loewenthal , S H. , Parker , R J. , and Zaretsky , E V. , “ Elastohydrodynamic Film Thickness Model for Heavily Loaded Contacts ,” J. Lubr. Tech., Trans., ASME, Series F , 96 , 3 , pp 472 – 481 ( 1974 ).
- Grubin , A N. and Vinogradov , I E. , “ Investigation of the Contact of Machine Components ,” Moscow, Ts TNITMASH, Book No. 30 , 1949 (OSIR), London, Translation No. 337).
- Cheng , H S. , “ A Refined Solution to the Thermal-Elastohydrodynamic Lubrication of Rolling and Sliding Cylinders ,” ASLE Trans. , 8 , pp 397 – 410 ( 1965 ).
- Jacobson , Bo , “ On the Lubrication of Heavily Loaded Cylindrical Surfaces Considering Surface Deformations and Solidification of the Lubricant ,” J. Lubr. Tech., Trans. ASME, Series F , 95 , 3 , pp 321 – 327 ( 1973 ).
- Cheng , H. , “ Isothermal Elastohydrodynamic Theory for the Full Range of Pressure-Viscosity Coefficient ,” ASME Trans., J. Lubr. Tech. , pp 35 – 43 ( 1972 ).
- Bell , J C. and Kannel , J W. , “ Interpretation of the Film Thickness of Lubricant Films in Rolling Contact II—Influence of Possible Rheological Factors ,” ASME Trans., J. Lubr. Tech. , pp 485 – 497 ( 1971 ).