References
- Bergmann H.W. Frommeyer G. Wassermann G. 1978 The dependence of the texture and microstructure in two-phase composites on the yield stresses of the components In: Gottstein, G. and Lucke, K. (Eds.) Textures of Materials II p. 379 (ICOTOM 5) Springer-Verlag
- Bevk , J. , Harbison , J.P. and Bell , J.L. 1978 . Anomalous increase in strength of in situ formed Cu–Nb multifilamentary composites . J. Appl. Phys. , 49 : 6031 – 6038 .
- Brandao , L. and Kalu , P.N. 1998 . The effect of fabrication mode on microstructrue, texture and strengthening in Cu–Nb/Ti composite . Scripta Mater , 39 : 27 – 33 .
- Chung , J.H. , Song , J.S. and Hong , S.I. 2001 . Bundling and drawing processing of Cu–Nb microcomposites with various Nb contents . J. Mater. Process Tech. , 113 : 604 – 609 .
- Frommeyer , G. and Wassermann , G. 1976 . Herstellung und Eigenschaften metallischer Verbundfolien . Z. Werkstofftechn , 7 : 154
- Han , K. , Embury , J.D. , Sims , J.R. , Camphell , L.J. , Schneider-Muntau , H.-J. , Pantsyrnyi , V.I. , Shikov , A. , Nikulin , A. and Vorobieva , A. 1999 . The fabrication, properties and microstructure of Cu–Ag and Cu–Nb composite conductors . Mater. Sci. and Eng. , A267 : 99 – 114 .
- Hong , S.I. and Hill , M.A. 2000a . Microstructural stability of Cu–Nb microcomposite wires fabricated by the bundling and drawing process . Mater. Sci. and Eng. , A281 : 189 – 197 .
- Hong , S.I. and Hill , M.A. 2000b . Mechanical properties of Cu–Nb microcomposites fabricated by the bundling and drawing process . Scripta Mater , 42 : 737 – 742 .
- Hu , H. and Cline , R.S. 1988 . On the mechanism of texture transition in face centered cubic metals . Textures and Microstructures , 8–9 : 191 – 206 .
- Humphreys , F.J. , Miller , W.S. and Djazeb , M.R. 1990 . Microstructural development during thermomechanical processing of particulate metal matrix composites . Mater. Sci. and Tech. , 6 : 1157 – 1166 .
- Humphreys , F.J. 1991 . The thermomechanical processing of A1-SiC particulate composites . Mater. Sci. and Eng. , A135 : 267 – 273 .
- Inoue , H. 2002 . Texture of extruded aluminum alloys . Journal of Japan Institute of Light Metals , 52 : 524 – 529 .
- Jin , Y. , Adachi , K. , Takeuchi , T. and Suzuki , H.G. 1996 . Microstructural evolution of a heavily cold-rolled Cu–Cr in situ metal matrix composite . Mater. Sci. and Eng. , A212 : 149 – 156 .
- Raabe , D. and Hangen , U. 1996 . Correlation of microstructure and type II superconductivity of a heavily cold rolled Cu-20mass%Nb in situ composite . Acta Mater , 44 : 953 – 961 .
- Russell , A.M. , Chumbley , L.S. , Ellis , T.W. , Laabs , F.C. , Norris , B. and Donizetti , G.E. 1995 . In situ strengthening of titanium with yittrium: texture analysis . J. Mater. Sci. , 30 : 4249 – 4262 .
- Russell , A.M. , Lund , T. , Chumbley , L.S. , Laabs , F.C. , Keehner , L.L. and Harrinaga , J.L. 1999 . A high-strength, high-conductivity Al-Ti deformation processed metal–metal matrix composite. Part A . Composites , 30 : 239 – 247 .
- Sauvage , X. , Thilly , L. , Lecouturier , F. , Guillet , A. and Blavette , D. 1999 . FIM and 3D atom probe analysis of Cu/Nb nanocomposite wires . Nanostructured Materials , 11 : 1031 – 1039 .
- Sauvage , X. , Renaud , L. , Deconihout , B. , Blavette , D. , Ping , D.H. and Hono , K. 2001 . Solid state amorphization in cold drawn Cu/Nb wires . Acta Mater , 49 : 389 – 394 .
- Snoeck , E. , Lecouturier , F. , Thilly , L. , Casanove , M.J. , Rakoto , H. , Coffe , G. , Askenazy , S. , Peyrade , J.P. , Roucau , C. , Pantsyrny , V. , Shikov , A. and Nikulin , A. 1998 . Microstructural studies of in situ produced filamentary Cu/Nb wires . Scripta Mater , 38 : 1643 – 1648 .
- Thieme , C.L.H. , Pourrahimi , S. and Foner , S. 1993 . High strength A1 metal–matrix microcomposite wire with 20 vol.% Nb and ultimate tensile strength up to 1030 MPa . Scripta Metall et Mater , 28 : 913 – 918 .
- Wassermann G. Bergmann H.W. Frommeyer G. 1978 Deformation textures in two-phase systems In: Gottstein, G. and Lucke, K. (Eds.) Textures of Materials II p. 37 (ICOTOM 5) Springer-Verlag
- Xu , K. , Russell , A.M. , Chumbley , L.S. , Laabs , F.C. , Gantovnik , V. and Tian , Y. 1999 . Characterization of strength and microstructure in deformation processed Al-Mg composites . J. Mater. Sci. , 34 : 5955 – 5959 .
- Xu , K. , Russell , A.M. , Chumbley , L.S. and Laabs , F.C. 2001 . A deformation processed Al-20% Sn in situ composite . Scripta Mater , 44 : 935 – 940 .