Publication Cover
Drying Technology
An International Journal
Volume 26, 2008 - Issue 5
227
Views
24
CrossRef citations to date
0
Altmetric
Original Articles

Drying Related Strain Development in Restrained Wood

&
Pages 544-551 | Published online: 04 Apr 2008

REFERENCES

  • Armstrong , L.D. ; Kingston , R.S.T. The effect of moisture content changes on the deformation of wood under stress . Australian Journal of Applied Science 1962 , 13 ( 4 ), 257 – 276 .
  • Ormarsson , S. ; Dahlblom , O. ; Petersson , H. A numerical study of the shape stability of sawn timber subjected to moisture variation . Part 2: Simulation of drying board. Wood Science and Technology 1999 , 33 , 407 – 423 .
  • Ormarsson , S. ; Dahlblom , O. ; Petersson , H. A numerical study of the shape stability of sawn timber subjected to moisture variation . Part 3: Influence of annual ring orientation. Wood Science and Technology 2000 , 34 , 207 – 219 .
  • Svensson , S. Shrinkage and shrinkage force in wood under kiln drying conditions . Holzforschung 1995 , 49 , 363 – 368 .
  • Svensson , S. Internal stresses in wood caused by climatic variation; PhD thesis , Lund Institute of Technology , Sweden , 1997 .
  • Ranta-Maunus , A. Determination of drying stresses in wood when shrinkage is prevented: Test method and modeling . Proceedings of the 3rd IUFRO International Wood Drying Conference , Vienna , Austria , August 18–21 , 1992 ; 139 – 144 .
  • Hisada , T. Creep and set behavior of wood related to kiln drying . Bulletin of Forestry and Forest Products Research Institute 1986 , 335 , 31 – 130 .
  • Queiroz , M.R. ; Nebra , S.A. Theoretical and experimental analysis of the drying kinetics of bananas . Journal of Food Engineering 2001 , 47 ( 2 ), 127 – 132 .
  • Crank , J. The Mathematics of Diffusion . Oxford University Press : Oxford , UK , 1975 .
  • Katekawa , M.E. ; Silva , M.A. A review of drying models including shrinkage effects . Drying Technology 1997 , 15 ( 6–8 ), 2045 – 2059 .
  • Wu , Q. Rheological behavior of Douglas-fir as related to the process of drying ; PhD thesis , Oregon State University , Corvallis , Oregon , USA , 1993 .
  • Majka , J. Stress development in dependence of the wood drying rate . Wood Technology 2004 , 7 ( 1 ), Available online at: http://www.ejpau.media.pl/volume7/issue1/wood/art-04.html .
  • Lazarescu , C. ; Wu , H. ; Avramidis , S. Shrinkage strain in wood under kiln-drying conditions . PRO Ligno Scientific Journal in the Field of Wood Engineering 2006 , 2 ( 2 ), 19 – 28 .
  • Pearson , H. ; Evans , R. Wood quality assessment for stress modeling project. ENSIS Wood Processing Newsletter, 2005, 36, 5–7.
  • Simpson , T.W. Predicting equilibrium moisture content of wood by mathematical models . Wood and Fiber 1973 , 5 ( 1 ), 41 – 49 .
  • Hanhijarvi , A. Perpendicular-to-grain creep of Finnish softwoods in high temperature drying conditions. Experiments and modeling in temperature range 95–125°C. VTT Publications 301 , Technical Research Centre of Finland : Helsinki , Finland , 1997 .
  • Shmulsky , R. EMC response along the tensile face of small wood beams . Wood Science and Technology 2004 , 37 , 447 – 449 .
  • Svensson , S. Stress-strain relationship of drying wood . Holzforschung 1997 , 51 , 472 – 478 .
  • Hernández , R.E. ; Bizon , M. Changes in shrinkage and tangential compression strength of sugar maple below and above the fiber saturation point . Wood and Fiber Science 1994 , 26 ( 3 ), 360 – 369 .
  • Almeida , G. ; Assor , C. ; Perré , P. The dynamic of shrinkage/moisture content behavior determined during the drying of micro-samples . Proceedings of the 10th IUFRO International Wood Drying Conference , Orono , ME , August 26–30 , 2007 , 16 – 21 .
  • Perre , P. Experimental device for the accurate determination of wood-water relations on micro-samples . Holzforschung 2007 , 61 , 419 – 429 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.