REFERENCES
- Stasta, P.; Boran, J.; Bebar, L.; Stehlik, P.; Oral, J. Thermal processing of sewage sludge. Applied Thermal Engineering 2006, 26(13), 1420–1426.
- Zhang, D.Q.; He, P.J.; Yu, L.Z.; Shao, L.M. Effect of inoculation time on the bio-drying performance of combined hydrolytic-aerobic process. Bioresource Technology 2009, 100(3), 1087–1093.
- Vaxelaire, J. Moisture sorption characteristics of waste activated sludge. Journal of Chemical Technology and Biotechnology 2001, 76(4), 377–382.
- Ruiz, T.; Wisniewski, C. Correlation between dewatering and hydro-textural characteristics of sewage sludge during drying. Separation and Purification Technology 2008, 61(2), 204–210.
- Chen, J.B.; Peng, X.F.; Tao, T.; Lee, D.J. Thermal drying of wastewater sludge with crack formation. Water Science and Technology 2004, 50(9), 177–182.
- Tao, T.; Peng, X.F.; Lee, D.J. Structure of crack in thermally dried sludge cake. Drying Technology 2005, 23(7), 1555–1568.
- Hsu, J.P.; Tao, T.; Su, A.; Mujumdar, A.S.; Lee, D.J. Model for sludge cake drying accounting for developing cracks. Drying Technology 2010, 28(7), 922–926.
- Tao, T.; Peng, X.F.; Lee, D.J. Skin layer on thermally dried sludge cake. Drying Technology 2006, 24(8), 1047–1052.
- Vaxelaire, J.; Puiggali, J.R. Analysis of the drying of residual sludge: From the experiment to the simulation of a belt dryer. Drying Technology 2002, 20(4–5), 989–1008.
- Font, R.; Gomez-Rico, M.F.; Fullana, A. Skin effect in the heat and mass transfer model for sewage sludge drying. Separation and Purification Technology 2011, 77, 146–161.
- Shin, Y.S.; Kim, H.C.; Chun, H.S. Drying of water treatment process sludge in a fluidized dryer. Korean Journal of Chemical Engineering 2000, 17(1), 22–26.
- Leonard, A.; Blacher, S.; Marchot, P.; Pirard, J.P.; Crine, M. Measurements of shrinkage and cracks associated to convective drying of soft materials by X-ray microtomography. Drying Technology 2004, 22(7), 1695–1708.
- Slim, R.; Zoughaib, A.; Clodic, D. Modeling of a solar and heat pump sludge drying system. International Journal of Refrigeration 2008, 31(7), 1156–1168.
- Zhao, L.; Gu, W.M.; He, P.J.; Shao, L.M. Effect of air-flow rate and turning frequency on bio-drying of dewatered sludge. Water Research 2010, 44(20), 6144–6152.
- Itaya, Y.; Kobyashi, N.; Li, L.; Suami, A.; Sawai, M.; Hamabe, H. Self-energy closed drying processes of sewage sludge combined with composting and drying enhancement by mixture of its carbonized char. In 18th International Drying Symposium (IDS 2012), Xiamen, China, November 11–15, 2012.
- Toei, R.; Hayashi, S.; Fujitani, T. Analysis of drying rate of the bed of granular and powdered materials during falling rate period. Kagaku Kogaku 1965, 29(10), 771–778.
- Molnar, K. Experimental techniques in drying. In Handbook of Industrial Drying, 3rd ed.; A.S. Mujumdar Ed.; CRC Press: Boca Raton, FL, 2007; 33–52.
- Mujumdar, A.S. Principles, classification, and selection of dryers. In Handbook of Industrial Drying, 3rd ed.; A.S. Mujumdar Ed.; CRC Press: Boca Raton, FL, 2007; 3–32.
- Itaya, Y.; Kobayashi, N. Effect of drying-induced strain stress on drying behavior of layered foods with different moisture sorption isotherm. In 17th International Drying Symposium (IDS 2010), Magdeburg, Germany, October 3–6, 2010.