Influence of sawdust addition on drying of wastewater sludges: Comparison of structural characteristics

References

• Grüter, H.; Matter, M.; Oehlmann, K.; Hicks, M. Drying of sewage sludge—An important step in waste disposal. Water Science and Technology 1990, 22(12), 57–63.
   Web of Science ®Google Scholar
• Vaxelaire, J.; Bongiovanni, J.; Mousques, P.; Puiggali, J. Thermal drying of residual sludge. Water Research 2000, 34(17), 4318–4323.
   Web of Science ®Google Scholar
• Arlabosse, P.; Chavez, S.; Lecomte, D. Method for thermal design of paddle dryers: Application to municipal sewage sludge. Drying Technology 2004, 22(10), 2375–2393.
   Web of Science ®Google Scholar
• Reyes, A.; Eckholt, M.; Troncoso, F.; Efremov, G. Drying kinetics of sludge from a wastewater treatment plant. Drying Technology 2004, 22(9), 2135–2150.
   Web of Science ®Google Scholar
• Léonard, A.; Blacher, S.; Marchot, P.; Pirard, J-P.; Crine, M. Convective drying of wastewater sludges: Influence of air temperature, superficial velocity, and humidity on the kinetics. Drying Technology 2005, 23(8), 1667–1679.
   Web of Science ®Google Scholar
• Tao, T.; Peng, X.; Lee, D. Thermal drying of wastewater sludge: Change in drying area owing to volume shrinkage and crack development. Drying Technology 2005, 23(3), 669–682.
   Web of Science ®Google Scholar
• Stasta, P.; Boran, J.; Bebar, L.; Stehlik, P.; Oral, J. Thermal processing of sewage sludge. Applied Thermal Engineering 2006, 26(13), 1420–1426.
   Web of Science ®Google Scholar
• Houdková, L.; Boráň, J.; Ucekaj, V.; Elsäßer, T.; Stehlík, P. Thermal processing of sewage sludge—II. Applied Thermal Engineering 2008, 28(16), 2083–2088.
   Web of Science ®Google Scholar
• Werle, S.; Wilk, R.K. A review of methods for the thermal utilization of sewage sludge: The polish perspective. Renewable Energy 2010, 35(9), 1914–1919.
   Web of Science ®Google Scholar
• Bennamoun, L.; Crine, M.; Léonard, A. Convective drying of wastewater sludge: Introduction of shrinkage effect in mathematical modeling. Drying Technology 2013, 31(6), 643–654.
   Web of Science ®Google Scholar
• Li, J.; Bennamoun, L.; Fraikin, L.; Salmon, T.; Toye, D.; Schreinemachers, R.; Léonard, A. Analysis of the shrinkage effect on mass transfer during convective drying of sawdust/sludge mixtures. Drying Technology 2014, 32(14), 1706–1717.
   Web of Science ®Google Scholar
• Léonard, A.; Meneses, E.; Le Trong, E.; Salmon, T.; Marchot, P.; Toye, D.; Crine, M. Influence of back mixing on the convective drying of residual sludges in a fixed bed. Water Research 2008, 42(10), 2671–2677.
   PubMed Web of Science ®Google Scholar
• Li, J.; Fraikin, L.; Salmon, T.; Bennamoun, L.; Toye, D.; Schreinemachers, R.; Léonard, A. Investigation on convective drying of mixtures of sewage sludge and sawdust in a fixed bed. Drying Technology 2015, 33(6), 704–712.
   Web of Science ®Google Scholar
• Berghel, J.; Renström, R. Basic design criteria and corresponding results performance of a pilot-scale fluidized superheated atmospheric condition steam dryer. Biomass and Bioenergy 2002, 23(2), 103–112.
   Web of Science ®Google Scholar
• Srinivasakannan, C.; Balasubramaniam, N. Drying of rubber wood sawdust using tray dryer. Particulate Science and Technology 2006, 24(4), 427–439.
   Web of Science ®Google Scholar
• Arlabosse, P.; Ferrasse, J.H.; Lecomte, D.; Crine, M.; Dumont, Y.; Léonard, A. Efficient sludge thermal processing: From drying to thermal valorization. In Modern Drying Technology: Energy Savings; Tsotsas, E. Mujumdar, A.S. Eds.; Vol. 4; Wiley-VCH: Weinheim 2012.
   Google Scholar
• Léonard, A.; Vandevenne, P.; Salmon, T.; Marchot, P.; Crine, M. Wastewater sludge convective drying: Influence of sludge origin. Environmental Technology 2004, 25(9), 1051–1057.
   PubMed Web of Science ®Google Scholar
• Li, J.; Plougonven, E.; Fraikin, L.; Salmon, T.; Toye, D.; Léonard, A. Image analysis of X-ray tomograms of sludge during convective drying in a pilot-scale fixed bed. Chemical Engineering Science 2015, 134, 222–229.
   Web of Science ®Google Scholar
• Tao, T.; Peng, X.; Lee, D. Structure of crack in thermally dried sludge cake. Drying Technology 2005, 23(7), 1555–1568.
   Web of Science ®Google Scholar
• Tao, T.; Peng, X.; Lee, D. Skin layer on thermally dried sludge cake. Drying Technology 2006, 24(8), 1047–1052.
   Web of Science ®Google Scholar
• Li, J.; Plougonven, E.; Fraikin, L.; Salmon, T.; Toye, D.; Nistajakis, E.; Léonard, A. Multiscale structure characterization of sawdust–wastewater sludge extrudates dried in a pilot-scale fixed bed. Biomass and Bioenergy 2015, 81, 98–107.
   Web of Science ®Google Scholar
• American Society of Agricultural Engineers. ASAE standard no. D245.5: Moisture relationships of plant-based agricultural products. ASAE: St. Joseph, MI, 1996; 452–464.
   Google Scholar
• Fraikin, L.; Herbreteau, B.; Chaucherie, X.; Nicol, F.; Crine, M.; Léonard, A. Impact of storage at 4°C on the study of sludge drying emissions. In 2nd European Conference on Sludge Management, September 9–10, Budapest, Hungary, 2010.
   Google Scholar
• Léonard, A.; Blandin, G.; Crine, M. Importance of rheological properties when drying sludge in a fixed bed. Presented at the 4th Inter-American Drying Conference: Challenges for Efficient Drying Processes, Montreal, Canada, August 23–27, 2009.
   Google Scholar
• Huron, Y.; Salmon, T.; Crine, M.; Blandin, G.; Léonard, A. Effect of liming on the convective drying of urban residual sludges. Asia‐Pacific Journal of Chemical Engineering 2010, 5(6), 909–914.
   Web of Science ®Google Scholar
• Toye, D.; Crine, M.; Marchot, P. Imaging of liquid distribution in reactive distillation packings with a new high-energy X-ray tomograph. Measurement Science and Technology 2005, 16(11), 2213–2220.
   Web of Science ®Google Scholar
• Aferka, S.; Crine, M.; Saroha, A.K.; Toye, D.; Marchot, P. In situ measurements of the static liquid holdup in katapak-sp12tm packed column using X-ray tomography. Chemical Engineering Science 2007, 62(21), 6076–6080.
   Web of Science ®Google Scholar
• Aferka, S.; Marchot, P.; Crine, M.; Toye, D. Interfacial area measurement in a catalytic distillation packing using high energy X-ray CT. Chemical Engineering Science 2010, 65(1), 511–516.
   Web of Science ®Google Scholar
• Aferka, S.; Viva, A.; Brunazzi, E.; Marchot, P.; Crine, M.; Toye, D. Tomographic measurement of liquid hold up and effective interfacial area distributions in a column packed with high performance structured packings. Chemical Engineering Science 2011, 66(14), 3413–3422.
   Web of Science ®Google Scholar
• Janzen, A.; Steube, J.; Aferka, S.; Kenig, E.; Crine, M.; Marchot, P.; Toye, D. Investigation of liquid flow morphology inside a structured packing using X-ray tomography. Chemical Engineering Science 2013, 102, 451–460.
   Web of Science ®Google Scholar
• Otsu, N. A threshold selection method from gray-level histograms. IEEE Transactions on Systems, Man, and Cybernetics 1979, 9(1), 62–66.
   Web of Science ®Google Scholar