Drying behavior and decay resistance of rubberwood from steamed log and presteamed lumber

References

• Srivaro, S.; Wongprot, T.; Matan, N.; Kyokong, B. Accelerated Conventional Temperature Drying of 30 mm Thick Rubberwood Lumber. Songklanakarin J. Sci. Technol. 2008, 30(4), 475–483.
   Google Scholar
• Zhou, Y.; Jiang, M.; Gao, R.; Li, X. Rubberwood Processing Manual: Demonstration of Rubberwood Processing Technology and Promotion of Sustainable Development in China and other Asia Countries; CFC/ITTO/72 PD103/01 Rev.4 (I); Beijing, 2007.
   Google Scholar
• Ratnasingam, J.; Grohmann, R.; Scholz, F. Effects of Pre-Steaming on the Drying Quality of Rubberwood. Eur. J. Wood Wood Prod. 2014, 72, 35–137. DOI: 10.1007/s00107-013-0747-7
   Web of Science ®Google Scholar
• Theppaya, T.; Prasertsan, S. Parameters Influencing Drying Behavior of Rubber Wood (Hevea brasiliensis) as Determined from Desorption Experiment. Drying Technol. 2002, 20(2), 507–525. DOI: 10.1081/drt-120002554
   Web of Science ®Google Scholar
• Severo, E. T. D.; Calonego, F. W.; Sansígolo, C. A.; Bond, B. Changes in the Chemical Composition and Decay Resistance of Thermally-Modified Hevea brasiliensis Wood. PLoS One 2016, 11, e0151353. DOI: 10.1371/journal.pone.0151353
   PubMed Web of Science ®Google Scholar
• Lim, S. C.; Sulaiman, A. Structure and Characteristics of Rubberwood. For. Res. Inst. Malays. 1999, 3(39), 17–26.
   Google Scholar
• Lim, S. C.; Gan, K. S.; Choo, K. T. The Characteristics, Properties and Uses of Plantation Timbers- Rubberwood and Acacia mangium. Timber Technol. Bull. 2003, (26), 1–11.
   Google Scholar
• Skolmen, R. G. Heating Logs to Relieve Growth Stresses. For. Prod. J. 1967, 17, 41–42.
   Google Scholar
• Calonego, F. W.; Severo, E. T. D.; Cunha, A. R.; Gaia, D. C. Use of Glass Transition Temperature for Stabilization of Board’s Cracks of Eucalyptus grandis. An. Acad. Bras. Cienc. 2010, 82(3), 791–797. DOI: 10.1590/s0001-37652010000300025
   PubMed Web of Science ®Google Scholar
• Severo, E. T. D.; Calonego, F. W.; Matos, C. A. O. Lumber Quality of Eucalyptus grandis as a Function of Diametrical Position and Log Steaming. Bioresour. Technol. 2010, 101(7), 2545–2548. DOI: 10.1016/j.biortech.2009.11.083
   PubMed Web of Science ®Google Scholar
• Severo, E. T. D.; Tomaselli, I. Efeito da Pré-Vaporização em Algumas Propriedades Físicas da Madeira de Eucalyptus dunnii. Cerne 2001, 7(2), 35–42.
   Google Scholar
• Yilgor, N.; Unsal, O.; Kartal, S. N. Physical, Mechanical, and Chemical Properties of Steamed Beech Wood. For. Prod. J. 2001, 51, 89–93.
   Web of Science ®Google Scholar
• Wimmerstedt, R. Steam Drying: History and Future. Drying Technol. 1995, 13(5–7), 1059–1076. DOI: 10.1080/07373939508917009
   Web of Science ®Google Scholar
• Wimmerstedt, R.; Harger, J. Steam Drying: Modeling and Applications. Drying Technol. 1996, 14(5), 1099–1119.
   Web of Science ®Google Scholar
• Zhang, Y.; Cai, L. Impact of Heating Speed on Permeability of Sub-Alpine Fir. Wood Sci. Technol. 2008, 42(3), 241–250. DOI: 10.1007/s00226-007-0172-3
   Web of Science ®Google Scholar
• Alexiou, P. N.; Wilkins, A. P.; Hartley, J. Effect of Pre-Steaming on Drying Rate, Wood Anatomy and Shrinkage of Regrowth Eucalyptus pilularis Sm. Wood Sci. Technol. 1990, 24(1), 103–110. DOI: 10.1007/bf00225310
   Web of Science ®Google Scholar
• Calonego, F. W.; Severo, E. T. D. Effect of Vaporization on the Drying Process of Eucalyptus grandis. Floresta e Ambiente 2004, 11(1), 7–13.
   Google Scholar
• Calonego, F. W.; Severo, E. T. D. Influence of Boards Diametrical Position and Steaming on the Drying Defects of Eucalyptus grandis. Cerne 2007, 13(1), 10–18.
   Web of Science ®Google Scholar
• Severo, E. T. D.; Tomaselli, I.; Calonego, F. W.; Ferreira, A. L.; Mendes, L. M. Effect of Steam Thermal Treatment on the Drying Process Variables of Eucalyptus dunnii. Cerne 2013, 19(4), 637–645.
   Web of Science ®Google Scholar
• Pelozzi, M. M. A.; Severo, E. T. D.; Rodrigues, P. L. M.; Calonego, F. W. Temperature Charts of Hevea brasiliensis During Log Steaming and its Effect on the Board Cracks. Eur. J. Wood Wood Prod. 2014, 72(1), 123–128. DOI: 10.1007/s00107-013-0759-3
   Web of Science ®Google Scholar
• Theppaya, T.; Prasertsan, S. Optimization of Rubber Wood Drying by Response Surface Method and Multiple Contour Plots. Drying Technol. 2004, 22(7), 1637–1660. DOI: 10.1081/drt-200025622
   Web of Science ®Google Scholar
• Taghiyari, H. R.; Habibzade, S; Tari, S. M. M. Effects of Wood Drying Schedules on Fluid Flow in Paulownia Wood. Drying Technol. 2014, 32, 89–95. DOI: 10.1080/07373937.2013.813855
   Web of Science ®Google Scholar
• Silva, M. R.; Machado, G. O.; Deiner, J.; Calil Jr, C. Permeability Measurements of Brazilian Eucalyptus. Mater. Res. 2010, 13(3), 281–286. DOI: 10.1590/s1516-14392010000300002
   Web of Science ®Google Scholar
• Sik, H. S.; Choo, K. T.; Sarani, Z.; Sahrim, A.; How, S. S.; Chin, H. C.; Maisaha, Y. Dimensional Stability of High Temperature-Dried Rubberwood Solid Lumber at Two Equilibrium Moisture Content Conditions. Drying Technol. 2010, 28, 1083–1090. DOI: 10.1080/07373937.2010.506162
   Web of Science ®Google Scholar
• Pendleburry, A. J.; Petty, J. A. Rubberwood Anatomy and its Influence on Gaseous Permeability. Proceedings of 24 Annual Meeting International Research Group on Wood Preservation, Orlando, 1993; n°93–40005, p. 15.
   Google Scholar
• Yamsaengsung, R.; Sattho, T. Superheated Steam Vacuum Drying of Rubberwood. Drying Technol. 2008, 26, 798–805. DOI: 10.1080/07373930802046518
   Web of Science ®Google Scholar
• Bhuiyan, T. R.; Hirai, N.; Sobue, N. Changes of Crystallinity in Wood Cellulose by Heat Treatment Under Dried and Moist Conditions. J. Wood Sci. 2000, 46(6), 431–436. DOI: 10.1007/bf00765800
   Web of Science ®Google Scholar
• Doi, S.; Kurimoto, Y.; Ohmura, W.; Ohara, S.; Aoyama, M.; Yoshimura, T. Effects of Heat Treatments of Wood on the Feeding Behavior of Two Subterranean Termites. Holzforschung 1999, 53, 225–229. DOI: 10.1515/hf.1999.038
   Web of Science ®Google Scholar
• Kubler, H. Growth Stresses in Trees and Related Wood Properties. For. Prod. Abstr. 1987, 10(3), 61–119.
   Google Scholar
• Liping, C.; Oliveira, L. C. Gas Permeability of Wetwood and Normal Wood of Subalpine Fir in Relation to Drying. Drying Technol. 2007, 25, 501–505. DOI: 10.1080/07373930601184072
   Web of Science ®Google Scholar
• IBDF. Norma Para Classificação de Madeira Serrada de Folhosas; Brasiliana: Brasília, 1983.
   Google Scholar
• ASTM D-2017. Standard Method of Accelerated Laboratory Test of Natural Decay Resistance of Wood; American Society for Testing and Materials: West Conshohocken, 2008.
   Google Scholar
• ASTM D-1413. Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures; American Society for Testing and Materials: West Conshohocken, 2007.
   Google Scholar