Spouted bed drying on inert particles: Evaluation of particle size distribution of recovered, accumulated and elutriated powders

References

• Kieckhefen, P.; Lichtenegger, T.; Pietsch, S.; Pirker, S.; Heinrich, S. Simulation of Spray Coating in a Spouted Bed Using Recurrence CFD. Particuology 2019, 42, 92–103. DOI:10.1016/j.partic.2018.01.008.
   Web of Science ®Google Scholar
• Wolff, M. H. F.; Salikov, V.; Antonyuk, S.; Heinrich, S.; Schneider, G. A. Novel, Highly-Filled Ceramic-Polymer Composites Synthesized by a Spouted Bed Spray Granulation Process. Compos. Sci. Technol. 2014, 90, 154–159. DOI:10.1016/j.compscitech.2013.11.006.
   Web of Science ®Google Scholar
• Melo, J. L. Z.; Bacelos, M.; Pereira, F. A. R.; Lira, T. S.; Gidaspow, D. CFD Modelling of Conical Spouted Beds for Processing LDPE/Al Composite. Chem. Eng. Process 2016, 108, 93–108. DOI:10.1016/j.cep.2016.07.011.
   Web of Science ®Google Scholar
• Aguado, R.; Saldarriaga, F.; Atxutegi, A.; Bilbao, J.; Olazar, M. Influence of the Kinetic Scheme and Heat Balance on the Modelling of Biomass Combustion in a Conical Spouted Bed. Energy 2019, 175, 758–767. DOI:10.1016/j.energy.2019.03.086.
   Web of Science ®Google Scholar
• Lopez, G.; Alvarez, J.; Amutio, M.; Hooshdaran, B.; Cortazar, M.; Haghshenasfard, M.; Hossein, S. H.; Olazar, M. Kinetic Modelling and Experimental Validation of Biomass Fast Pyrolysis in a Conical Spouted Bed Reactor. Chem. Eng. J. 2019, 373, 677–686. DOI:10.1016/j.cej.2019.05.072.
   Web of Science ®Google Scholar
• Martins, R.; Britto-Costa, P. H.; Ruotolo, L. A. M. Removal of Toxic Metals from Aqueous Effluents by Electrodeposition in a Spouted Bed Electrochemical Reactor. Environ. Technol. 2012, 33, 1123–1131. DOI:10.1080/09593330.2011.610361.
   PubMed Web of Science ®Google Scholar
• Silva Costa, A. B.; Freire, F. B.; Freire, J. T.; Ferreira, M. C. Modelling Drying Pastes in Vibrofluidized Bed with Inert Particles. Chem. Eng. Process 2016, 103, 1–11. DOI:10.1016/j.cep.2015.09.012.
   Web of Science ®Google Scholar
• Freire, J. T.; Ferreira, M. C.; Freire, F. B.; Nascimento, B. S. A Review on Paste Drying with Inert Particles as Support Medium. Drying Technol. 2012, 30, 330–341. DOI:10.1080/07373937.2011.638149.
   Web of Science ®Google Scholar
• Dotto, G. L.; Souza, V. C.; Pinto, S. L. A. A. Drying of Chitosan in a Spouted Bed: The Influences of Temperature and Equipment Geometry in Powder Quality. LWT - Food Sci. Technol. 2011, 44, 786–1792.
   Web of Science ®Google Scholar
• Daleffe, R. V.; Ferreira, M. C.; Freire, J. T. Drying of Paste in Vibro-Fluidized Beds: Effects of the Amplitude and Frequency of Vibration. Drying Technol. 2005, 23, 1675–1781.
   Web of Science ®Google Scholar
• Meili, L.; Daleffe, R. V.; Ferreira, M. C.; Freire, J. T. Analysis of Dimensionless Vibration Number on the Drying of Pastes in Vibrofluidized Beds. Drying Technol. 2010, 28, 402–411. DOI:10.1080/07373931003645298.
   Web of Science ®Google Scholar
• Pereira, N. R.; Godoi, F. C.; Rocha, S. C. S. Drying of Starch Suspension in Spouted Bed with Inert Particles: Physical and Thermal Analysis of Product. Drying Technol. 2010, 28, 1288–1296.
   Web of Science ®Google Scholar
• Sousa, R. C.; Ferreira, M. C.; Altzibar, H.; Freire, F. B.; Freire, J. T. Drying of Pasty and Granular Materials in Mechanically and Conventional Spouted Beds. Particuology 2019, 42, 176–183. DOI:10.1016/j.partic.2018.01.006.
   Web of Science ®Google Scholar
• Perazzini, M. T. B.; Freire, F. B.; Freire, J. T. Influence of Bed Geometry on the Drying of Skimmed Milk in a Spouted Bed. ACES 2015, 5, 447–460. DOI:10.4236/aces.2015.54046.
   Google Scholar
• Braga, M. B.; Rocha, S. C. S. Drying of Milk-Blackberry Pulp Mixture in Spouted Bed. Can. J. Chem. Eng. 2013, 91, 1786–1792. DOI:10.1002/cjce.21918.
   Web of Science ®Google Scholar
• Freire, J. T.; Ferreira, M. C.; Freire, J. T. Drying of Solutions, Slurries and Pastes. In Spouted and Spout-Fluid Beds: Fundamentals and Applications; Epstein, N., Grace, J. R., Eds.; Cambridge University Press: New York, 2011; pp 206–221.
   Google Scholar
• Almeida, A. R. F.; Freire, F. B.; Freire, J. T. Transient Analysis of Pasty Material Drying in a Spouted Bed of Inert Particles. Drying Technol. 2010, 28, 37–41.
   Web of Science ®Google Scholar
• Souza, C. R. F.; Oliveira, W. P. Drying of Herbal Extract in a Draft-Tube Spouted Bed. Can. J. Chem. Eng. 2009, 87, 279–288. DOI:10.1002/cjce.20160.
   Web of Science ®Google Scholar
• Medeiros, M. F. D.; Rocha, S. C. S.; Alsina, O. L. S.; Jerônimo, C. E. M.; Medeiros, U. K. L.; Mata, A. L. M. L. Drying of Pulps of Tropical Fruits in Spouted Bed: Effect of Composition on Dryer Performance. Drying Technol. 2002, 20, 37–41.
   Web of Science ®Google Scholar
• Pham, Q. T. Behaviour of a Conical Spouted-Bed Dryer for Animal Blood. Can. J. Chem. Eng. 1983, 61, 426–434. DOI:10.1002/cjce.5450610325.
   Web of Science ®Google Scholar
• Patel, K.; Bridgewater, J.; Baker, C. G. J.; Schneider, T. Spouting Behaviour of Wet Solids. In Drying’86; Mujumdar, A. S., Roques, M. S. Eds; Hemisphere Publishing Corporation: New York, 1986; pp 177–182.
   Google Scholar
• Barret, N.; Fane, A. Drying Liquid Materials in a Spouted Bed. In Drying’89; Hemisphere Publishing Corporation: New York, 1990.
   Google Scholar
• Schneider, T.; Bridgwater, J. The Stability of Wet Spouted Beds. Drying Technol. 1993, 11, 277–301. DOI:10.1080/07373939308916820.
   Web of Science ®Google Scholar
• Spitzner Neto, P. I.; Cunha, F. O.; Freire, J. T. Effect of the Presence of Paste in a Conical Spouted Bed Dryer with Continuous Feeding. Drying Technol. 2002, 20, 780–811.
   Web of Science ®Google Scholar
• Bacelos, M. S.; Spitzner Neto, P. I.; Silveira, A. M. S.; Freire, J. T. Analysis of Fluid Dynamic Behavior of Conical Spouted Beds. Drying Tech. 2005, 23, 427–453. DOI:10.1081/DRT-200054116.
   Web of Science ®Google Scholar
• Xu, H.; Zhong, W.; Yu, A.; Yuan, Z. Spouting Characteristics of Wet Particles in a Conical-Cylindrical Spouted Bed. Ind. Eng. Chem. Res. 2015, 54, 9894–9902. DOI:10.1021/acs.iecr.5b02742.
   Web of Science ®Google Scholar
• Perazzini, M. T. B.; Freire, F. B.; Ferreira, M. C.; Freire, J. T. Stability and Performance of a Spouted Bed in Drying Skimmed Milk: Influence of the Cone Angle and Air Inlet Device. Drying Technol. 2018, 36, 341–354.
   Web of Science ®Google Scholar
• Moreira da Silva, C. A.; Ferreira, M. C.; Freire, F. B.; Freire, J. T. Analysis of the Dynamics of Paste Drying in a Spouted Bed. Drying Technol. 2018, 36, 1–9.
   Google Scholar
• Nascimento, B. S.; Freire, F. B.; Freire, J. T. Moisture Prediction during Paste Drying in a Spouted Bed Moisture Prediction during Paste Drying in a Spouted Bed. Drying Technol. 2013, 31, 1808–1816.
   Web of Science ®Google Scholar
• Nascimento, B. S.; Freire, F. B.; Freire, J. T. Neuronal and Grey Modelling of Milk Drying in Spouted Bed. Can. J. Chem. Eng. 2013, 91, 1815–1821. DOI:10.1002/cjce.21886.
   Web of Science ®Google Scholar
• Freire, J. T.; Freire, F. B.; Ferreira, M. C.; Nascimento, B. S. A Hybrid Lumped Parameter/Neural Network Model for Spouted Bed Drying of Pastes with Inert Particles. Drying Technol. 2012, 30, 1342–1353.
   Web of Science ®Google Scholar
• Kutsakova, V. E. Drying of Liquid and Pasty Products in a Modified Spouted Bed of Inert Particles. Drying Technol. 2004, 22, 2343–2350.
   Web of Science ®Google Scholar
• Marreto, R. N.; Freire, J. T.; Freitas, L. A. P. Drying of Pharmaceuticals: The Applicability of Spouted Beds. Drying Technol. 2006, 24, 327–338. DOI:10.1080/07373930600564324.
   Web of Science ®Google Scholar
• Benelli, L.; Souza, C. R. F.; Oliveira, W. P. Spouted Bed Performance on Drying of an Aromatic Plant Extract. Powder Technol. 2013, 239, 59–71. DOI:10.1016/j.powtec.2013.01.058.
   Web of Science ®Google Scholar
• Souza, C. R. F.; Donida, M. W.; Rocha, S. C. S.; Oliveira, W. P. The Role of Colloidal Silicon Dioxide in the Enhancement of the Drying of Herbal Preparations in Suspended State. Chem. Eng. Commun. 2008, 196, 391–405. DOI:10.1080/00986440802359543.
   Web of Science ®Google Scholar
• Vieira, G. N. A.; Olazar, M.; Freire, J. T.; Freire, F. B. Real-Time Monitoring of Milk Powder Moisture Content during Drying in a Spouted Bed Dryer Using a Hybrid Neural Soft Sensor. Drying Technol. 2018, 36, 1–7.
   Google Scholar
• Souza, C. R. F.; Oliveira, W. P. Spouted Bed Drying of Bauhinia Forficate Link Extract: The Effects of Feed Atomizer Position and Operating Conditions on Equipment Performance and Product Properties. Braz. J. Chem. Eng. 2005, 22, 239–247. DOI:10.1590/S0104-66322005000200011.
   Web of Science ®Google Scholar
• Benali, M.; Amazouz, M. Drying of Vegetable Starch Solutions on Inert Particles: Quality and Energy Aspects. J. Food Eng. 2006, 74, 484–489. DOI:10.1016/j.jfoodeng.2005.01.045.
   Web of Science ®Google Scholar
• Mathur, K. B.; Epstein, N. Spouted Beds. Academic Press: New York, 1974.
   Google Scholar
• Montgomery, D. C. Design and Analysis of Experiments. 5th ed., John Wiley & Sons: New York, 2001.
   Google Scholar
• Filková, I.; Mujumdar, A. Industrial Spray Drying Systems. In Handbook of Industrial Drying, Mujumdar, A. S., Ed.; Marcel Dekker: New York, 1995; p 263–307.
   Google Scholar
• Passos, M. L.; Massarani, G.; Freire, J. T.; Mujumdar, A. S. Drying of Pastes in Spouted Beds of Inert Particles : Design Criteria and Modeling. Drying Technol. 1997, 15, 605–624. DOI:10.1080/07373939708917249.
   Web of Science ®Google Scholar
• Markowski, A. S. Drying Characteristics in a Jet Spouted Bed Dryer. Can. J. Chem. Eng. 1992, 70, 938–944. DOI:10.1002/cjce.5450700516.
   Web of Science ®Google Scholar
• Reyes, A.; Díaz, G.; Marquardt, F.-H. Analysis of Mechanically Agitated Fluid-Particle Contact Dryers. Drying Technol. 2001, 19, 2235–2259.
   Web of Science ®Google Scholar
• Hutington, D. H. The Influence of Spray Drying Process on Product Properties. Drying Technol. 2004, 22, 1261–1287.
   Web of Science ®Google Scholar
• Markowski, A. S. Quality Interaction in a Jet Spouted Bed Dryer for Bio-Products. Drying Technol. 1993, 11, 369–387.
   Web of Science ®Google Scholar
• Seville, J. P. K.; Willett, C. D.; Knight, P. C. Interparticle Forces in Fluidisation: A Review. Powder Technol. 2000, 113, 261–268. DOI:10.1016/S0032-5910(00)00309-0.
   Web of Science ®Google Scholar