Spray drying experiments and CFD simulation of guava juice formulation

References

• Espinal Ruiz, M.; Daza Agudelo, J. I.; Restrepo Sanchez, L. P. Lipophilic Antioxidant Activity of Guava Fruit Varieties Palmira ICA I, Regional Roja and Regional Blanca in Four Ripening Stages. Agron. Colomb. 2012, 30, 251–259.
   Google Scholar
• Hui, Y. H. Handbook of Fruits and Fruit Processing; Blackwell Publishing: Ames, Iowa, 2006; pp 598–604.
   Google Scholar
• Osorio, C.; Forero, D. P.; Carriazo, J. G. Characterisation and Performance Assessment of Guava (Psidium guajava L.) Microencapsulates Obtained by Spray-Drying. Food Res. Int. 2011, 44, 1174–1181. DOI: 10.1016/j.foodres.2010.09.007.
   Web of Science ®Google Scholar
• Masters, K. Spray Drying in Practice; SprayDryConsult International ApS: Charlottenlund, Denmark, 2002; pp. 19–38.
   Google Scholar
• Huang, L. X.; Kumar, K.; Mujumdar, A. S. Computational Fluid Dynamic Simulation of Droplet Drying in a Spray Dryer. In Proceedings of the 14th International Drying Symposium (IDS 2004); 2004; Vol A, pp 326–332.
   Google Scholar
• Kieviet, F. G. Modeling Quality in Spray Drying. Ph.D. Thesis, Department of Chemical Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands, 1997.
   Google Scholar
• Kuriakose, R.; Anandharamakrishnan, C. Computational Fluid Dynamics (CFD) Applications in Spray Drying of Food Products. Trends Food Sci. Technol. 2010, 21, 383–398. DOI: 10.1016/j.tifs.2010.04.009.
   Web of Science ®Google Scholar
• Guo, B.; Langrish, T. A. G.; Fletcher, D. F. Simulation of Gas Flow Instability in a Spray Dryer. Chem. Eng. Res. Des. 2003, 81, 631–638. DOI: 10.1205/026387603322150480.
   Web of Science ®Google Scholar
• Fletcher, D. F.; Guo, B.; Harvie, D. J. E.; Langrish, T. A. G.; Nijdam, J. J.; Williams, J. What is Important in the Simulation of Spray Dryer Performance and How Do Current CFD Models Perform? Appl. Math. Model. 2006, 30, 1281–1292. DOI: 10.1016/j.apm.2006.03.006.
   Web of Science ®Google Scholar
• Southwell, D. B.; Langrish, T. A. G. The Effect of Swirl on Flow Stability in Spray Dryers. Chem. Eng. Res. Des. 2001, 79, 222–234. DOI: 10.1205/026387601750281752.
   Web of Science ®Google Scholar
• Cubillos-Varela, A. Modelación del Proceso de Deshidratación por Espray de Jugo de Guayaba. Ph.D. Dissertation, Universidad Nacional de Colombia, 2017.
   Google Scholar
• Huang, L. X.; Kumar, K.; Mujumdar, A. S. A Comparative Study of a Spray Dryer with Rotary Disk Atomizer and Pressure Nozzle Using Computational Fluid Dynamic Simulations. Chem. Eng. Process. 2006, 45, 461–470. DOI: 10.1016/j.cep.2005.11.004.
   Web of Science ®Google Scholar
• Mezhericher, M.; Levy, A.; Borde, I. Three-Dimensional Spray-Drying Model Based on Comprehensive Formulation of Drying Kinetics. Dry. Technol. 2012, 30, 1256–1273. DOI: 10.1080/07373937.2012.686136.
   Web of Science ®Google Scholar
• Ullum, T.; Sloth, J.; Brask, A.; Wahlberg, M. Predicting Spray Dryer Deposits by CFD and an Empirical Drying Model. Dry. Technol. 2010, 28, 723–729. DOI: 10.1080/07373931003799319.
   Web of Science ®Google Scholar
• Woo, M. W.; Daud, W. R. W.; Mujumdar, A. S.; Wu, Z.; Talib, M. Z. M.; Tasirin, S. M. CFD Evaluation of Droplet Drying Models in a Spray Dryer Fitted with a Rotary Atomizer. Dry. Technol. 2008, 26, 1180–1198. DOI: 10.1080/07373930802306953.
   Web of Science ®Google Scholar
• Anandharamakrishnan, C.; Gimbun, J.; Stapley, A. G. F.; Rielly, C. D. A Study of Particle Histories during Spray Drying Using Computational Fluid Dynamic Simulations. Dry. Technol. 2010, 28, 566–576. DOI: 10.1080/07373931003787918.
   Web of Science ®Google Scholar
• Mezhericher, M.; Levy, A.; Borde, I. Modeling of Droplet Drying in Spray Chambers Using 2D and 3D Computational Fluid Dynamics. Dry. Technol. 2009, 27, 359–370. DOI: 10.1080/07373930802682940.
   Web of Science ®Google Scholar
• Johansson, S.; Davidson, L.; Olsson, E. Numerical Simulation of Vortex Shedding Past Triangular Cylinders at High Reynolds Numbers Using a k-ϵ Turbulence Model. Int. J. Numer. Methods Fluids 1993, 16, 859–878. DOI: 10.1002/fld.1650161002.
   Web of Science ®Google Scholar
• Fletcher, D. F.; Langrish, T. A. G. Scale-Adaptive Simulations (SAS) Modelling of a Pilot-Scale Spray Dryer. Chem. Eng. Res. Des. 2009, 87, 1371–1378. DOI: 10.1016/j.cherd.2009.03.006.
   Web of Science ®Google Scholar
• Jongsma, F. J.; Innings, F.; Olsson, M.; Carlsson, F. Large Eddy Simulation of Unsteady Turbulent Flow in a Semi-Industrial Size Spray Dryer. Dairy Sci. Technol. 2013, 93, 373–386. DOI: 10.1007/s13594-012-0097-y.
   Web of Science ®Google Scholar
• Sommerfeld, M.; Lain, S. From Elementary Processes to the Numerical Prediction of Industrial Particle-Laden Flows. Multiph. Sci. Technol. 2009, 21, 123–140. DOI: 10.1615/MultScienTechn.v21.i1-2.100.
   Google Scholar
• Verdurmen, R. E. M.; Menn, P.; Ritzert, J.; Blei, S.; Nhumaio, G. C. S.; Sonne Sørensen, T.; Gunsing, M.; Straatsma, J.; Verschueren, M.; Sibeijn, M.; et al. Simulation of Agglomeration in Spray Drying Installations: The EDECAD Project. Dry. Technol. 2004, 22, 1403–1461. DOI: 10.1081/DRT-120038735.
   Web of Science ®Google Scholar
• Zbiciński, I.; Li, X. Conditions for Accurate CFD Modeling of Spray-Drying Process. Dry. Technol. 2006, 24, 1109–1114. DOI: 10.1080/07373930600778221.
   Web of Science ®Google Scholar
• Huntington, D. H. The Influence of the Spray Drying Process on Product Properties. Dry. Technol. 2004, 22, 1261–1287. DOI: 10.1081/DRT-120038730.
   Web of Science ®Google Scholar
• Ranz, W. E.; Marshall, W. R., Jr. Evaporation from Drops. Chem. Eng. Prog. I and II 1952, 48, 141–146 and 173–180.
   Web of Science ®Google Scholar
• Langrish, T. A. G.; Fletcher, D. F. Spray Drying of Food Ingredients and Applications of CFD in Spray Drying. Chem. Eng. Process. 2001, 40, 345–354. DOI: 10.1016/S0255-2701(01)00113-1.
   Web of Science ®Google Scholar
• Jin, Y.; Chen, X. D. Numerical Study of the Drying Process of Different Sized Particles in an Industrial-Scale Spray Dryer. Dry. Technol. 2009, 27, 371–381. DOI: 10.1080/07373930802682957.
   Web of Science ®Google Scholar
• Sloth, J.; Kiil, S.; Jensen, A. D.; Andersen, S. K.; Jørgensen, K.; Schiffter, H.; Lee, G. Model Based Analysis of the Drying of a Single Solution Droplet in an Ultrasonic Levitator. Chem. Eng. Sci. 2006, 61, 2701–2709. DOI: 10.1016/j.ces.2005.11.051.
   Web of Science ®Google Scholar
• Adhikari, B.; Howes, T.; Bhandari, B.; Truong, V. Experimental Studies and Kinetics of Single Drop Drying and Their Relevance Drying of Sugar-Rich Foods: A Review. Int. J. Food Prop. 2000, 3, 323–351. DOI: 10.1080/10942910009524639.
   Web of Science ®Google Scholar
• Fu, N.; Wai Woo, M.; Lin, S. X. Q.; Zhou, Z.; Dong Chen, X. Reaction Engineering Approach (REA) to Model the Drying Kinetics of Droplets with Different Initial Sizes—Experiments and Analyses. Chem. Eng. Sci. 2011, 66, 1738–1747. DOI: 10.1016/j.ces.2011.01.009.
   Web of Science ®Google Scholar
• Lin, S.; Chen, X. Improving the Glass Filament Method for Accurate Measurements of Drying Kinetics of Liquid Droplets. Chem. Eng. Res. Des. 2002, 80, 401–410. DOI: 10.1205/026387602317446443.
   Web of Science ®Google Scholar
• Charlesworth, D. H.; Marshall, W. R. Evaporation from Drops Containing Dissolved Solids. AIChE J. 1960, 6, 9–23. DOI: 10.1002/aic.690060104.
   Web of Science ®Google Scholar
• González, I. A. Chemical Characterization of the Color of Different Varieties of Colombian Guava (Psidium guajava L.). Master Thesis, Universidad Nacional de Colombia, 2010.
   Google Scholar
• Cubillos-Varela, A.; Gómez-Mejía, A.; Rincón-Prat, S. Experimental Methodology to Study Single Droplet Drying. Agron. Colomb. 2016, 34, 563–565.
   Google Scholar
• Langrish, T. A. G.; Kockel, T. K. The Assessment of a Characteristic Drying Curve for Milk Powder for Use in Computational Fluid Dynamics Modelling. Chem. Eng. J. 2001, 84, 69–74. DOI: 10.1016/S1385-8947(00)00384-3.
   Web of Science ®Google Scholar
• Crowe, C. T.; Schwarzkopf, J. D.; Sommerfeld, M.; Tsuji, Y. Multiphase Flows with Droplets and Particles, 2nd ed.; CRC Press: Boca Raton, FL, 2012; pp. 157–253.
   Google Scholar
• Fluent Software Manual, Ansys 16.2; Ansys Inc.; 2015. www.ansys.com (accessed May 28, 2019).
   Google Scholar
• Huang, L. X.; Kumar, K.; Mujumdar, A. S. Simulation of a Spray Dryer Fitted with a Rotary Disk Atomizer Using a Three-Dimensional Computational Fluid Dynamic Model. Dry. Technol. 2004, 22, 1489–1515. DOI: 10.1081/DRT-120038737.
   Web of Science ®Google Scholar
• Birchal, V. S.; Huang, L.; Mujumdar, A. S.; Passos, M. L. Spray Dryers: Modeling and Simulation. Dry. Technol. 2006, 24, 359–371. DOI: 10.1080/07373930600564431.
   Web of Science ®Google Scholar
• Benavides, A.; van Wachem, B. Eulerian-Eulerian Prediction of Dilute Turbulent Gas-Particle Flow in a Backward-Facing Step. Int. J. Heat Fluid Flow 2009, 30, 452–461. DOI: 10.1016/j.ijheatfluidflow.2009.02.012.
   Web of Science ®Google Scholar
• Tsotsas, E.; Mujumdar, A. S. Modern Drying Technology: Computational Tools at Different Scales; Wiley-VCH: Weinheim, Germany, 2007; Vol. 1, pp 155–208.
   Google Scholar
• Mezhericher, M.; Levy, A.; Borde, I. Droplet–Droplet Interactions in Spray Drying by Using 2D Computational Fluid Dynamics. Dry. Technol. 2008, 26, 265–282. DOI: 10.1080/07373930801897523.
   Web of Science ®Google Scholar
• Jubaer, H.; Afshar, S.; Xiao, J.; Chen, X. D.; Selomulya, C.; Woo, M. W. On the Importance of Droplet Shrinkage in CFD-Modeling of Spray Drying. Dry. Technol. 2018, 36, 1785–1801. DOI: 10.1080/07373937.2017.1349791.
   Web of Science ®Google Scholar
• Gutiérrez-Suárez, J. A.; Gómez, A.; Cubillos-Varela, A. Study of the Airflow inside a Spray Drying Chamber. Agron. Colomb. 2016, 34, 655–658.
   Google Scholar