References
- Fang, Y.; Selomulya, C.; Chen, X. D. On Measurement of Food Powder Reconstitution Properties. Drying Technol. 2007, 26, 3–14. DOI: https://doi.org/10.1080/07373930701780928.
- Intipunya, P.; Bhandari, B. R. Chemical Deterioration and Physical Instability of Food Powders. In Chemical Deterioration and Physical Instability of Food and Beverages; Skibsted, L. H.; Risbo, J.; Andersen, M. L., Eds.; Woodhead Publishing Series in Food Science, Technology and Nutrition: Oxford, 2010; pp 663–700. DOI: https://doi.org/10.1533/9781845699260.3.663.
- Atalar, I.; Yazici, F. Effect of Different Binders on Reconstitution Behaviors and Physical, Structural, and Morphological Properties of Fluidized Bed Agglomerated Yoghurt Powder. Drying Technol. 2019, 37, 1656–1664. DOI: https://doi.org/10.1080/07373937.2018.1529038.
- Fitzpatrick, J.; Ahrné, L. M. Food Powder Handling and Processing: Industry Problems, Knowledge Barriers and Research Opportunities. Chem. Eng. Process. 2005, 44, 209–214. DOI: https://doi.org/10.1016/j.cep.2004.03.014.
- Fitzpatrick, J. J.; van Lauwe, A.; Coursol, M.; O'Brien, A.; Fitzpatrick, K. L.; Ji, J.; Miao, S. Investigation of the Rehydration Behavior of Food Powders by Comparing the Behavior of Twelve Powders with Different Properties. Powder Technol. 2016, 297, 340–348. DOI: https://doi.org/10.1016/j.powtec.2016.04.036.
- Hogekamp, S.; Schubert, H. Rehydration of Food Powders. Food Sci. Technol. Int. 2003, 9, 223–235. DOI: https://doi.org/10.1177/1082013203034938.
- Selomulya, C.; Fang, Y.; Food Powder Rehydration. In Handbook of Food Powder, 1st ed.; Bhandari, B., Bansal, N.; Zhang, M. Schuck, P., Eds.; Woodhead Publishing: Cambridge, 2013; pp 379–408.
- Schubert, H. Food Particle Technology. Part I: Properties of Particles and Particulate Food Systems. J. Food Eng. 1987, 6, 1–32. DOI: https://doi.org/10.1016/0260-8774(87)90019-7.
- Forny, L.; Marabi, A.; Palzer, S. Wetting, Disintegration and Dissolution of Agglomerated Water Soluble Powders. Powder Technol. 2011, 206, 72–78. DOI: https://doi.org/10.1016/j.powtec.2010.07.022.
- Schubert, H.; Ax, K.; Behrend, O. Product Engineering of Dispersed Systems. Trends Food Sci. Technol. 2003, 14, 9–16. DOI: https://doi.org/10.1016/S0924-2244(02)00245-5.
- Stokes, J. R.; Xu, Y. Rheology of Food Materials: Impact on and Relevance in Food Processing. Ref. Module Food Sci. 2019, 1–9. DOI: https://doi.org/10.1016/B978-0-08-100596-5.21076-7.
- Durigon, A.; de Souza, P. G.; Carciofi, B. A. M.; Laurindo, J. B. Cast-Tape Drying of Tomato Juice for the Production of Powdered Tomato. Food Bioprod. Process. 2016, 100, 145–155. DOI: https://doi.org/10.1016/j.fbp.2016.06.019.
- Zotarelli, M. F.; Silva, V. M.; Durigon, A.; Hubinger, M. D.; Laurindo, J. B. Production of Mango Powder by Spray Drying and Cast-Tape Drying. Powder Technol. 2017, 305, 447–454. DOI: https://doi.org/10.1016/j.powtec.2016.10.027.
- Leverrier, C.; Almeida, G.; Espinosa-Mu Noz, L.; Cuvelier, G. Influence of Particle Size and Concentration on Rheological Behaviour of Reconstituted Apple Purees. Food Biophys. 2016, 11, 235–247. DOI: https://doi.org/10.1007/s11483-016-9434-7.
- Kumar, M. M.; Kirti, J.; Eyarkai, N. V.; Bhushan, B.; Thirupathi, V. Modelling of Rheological Properties of Mango (cv. Neelum) Suspensions: Effect of Sample Concentration and Particle Size. J. Agric. Eng. 2019, 55, 13–20.
- Barbana, C.; El-Omri, A. Viscometric Behavior of Reconstituted Tomato Concentrate. Food Bioprocess. Technol. 2012, 5, 209–215. DOI: https://doi.org/10.1007/s11947-009-0270-3.
- León-Martínez, F. M.; Rodríguez-Ramírez, J.; Medina-Torres, L. L.; Méndez Lagunas, L. L.; Bernad-Bernad, M. J. Effects of Drying Conditions on the Rheological Properties of Reconstituted Mucilage Solutions (Opuntia ficus-indica). Carbohydr. Polym. 2011, 84, 439–445. DOI: https://doi.org/10.1016/j.carbpol.2010.12.004.
- Seth, D.; Mishra, H. N.; Deka, S. C. Functional and Reconstitution Properties of Spray-Dried Sweetened Yogurt Powder as Influenced by Processing Conditions. Int. J. Food Prop. 2017, 20, 1603–1611. DOI: https://doi.org/10.1080/10942912.2016.1214965.
- Jittanit, W.; Chantara-In, M.; Deying, T.; Ratanavong, W. Production of Tamarind Powder by Drum Dryer Using Maltodextrin and Arabic Gum as Adjuncts. Songklanakarin J. Sci. Technol. 2011, 33, 33–41.
- Tonin, I. P.; Ferrari, C. C.; Silva, M. G.; Oliveira, K. L.; Berto, M. I.; Silva, V. M.; Germer, S. P. M. Performance of Different Process Additives on the Properties of Mango Powder Obtained by Drum Drying. Drying Technol. 2018, 36, 355–365. DOI: https://doi.org/10.1080/07373937.2017.1334000.
- AOAC International. Official Methods of Analysis. 18th ed., 2005; Current through Revision 2, 2007 (Online). AOAC International, Gaithersburg, MD.
- Dacanal, G. C.; Menegalli, F. C. Selection of Operational Parameters for the Production of Instant Soy Protein Isolate by Pulsed Bed Agglomeration. Power Technol. 2010, 203, 565–573. DOI: https://doi.org/10.1016/j.powtec.2010.06.023.
- Oostveen, M. L. M.; Meesters, G. M. H.; Van Ommen, J. R. Quantification of Powder Wetting by Drop Penetration Time. Powder Technol. 2015, 274, 62–66. DOI: https://doi.org/10.1016/j.powtec.2014.09.021.
- Cano-Chauca, M.; Stringheta, P. C.; Ramos, A. M.; Cal-Vidal, J. Effect of the Carriers on the Microstructure of Mango Powder Obtained by Spray Drying and Its Functional Characterization. Innovative Food Sci. Emerg. Technol. 2005, 6, 420–428. DOI: https://doi.org/10.1016/j.ifset.2005.05.003.
- Caparino, O. A.; Tang, J.; Nindo, C. I.; Sablani, S. S.; Powers, J. R.; Fellman, J. K. Effect of Drying Methods on the Physical Properties and Microstructures of Mango (Philippine ‘Carabao’ Var.) Powder. J. Food Eng. 2012, 111, 135–148. DOI: https://doi.org/10.1016/j.jfoodeng.2012.01.010.
- Caparino, O. A.; Nindo, C. I.; Tang, J.; Sablani, S. S.; Chew, B. P.; Mathison, B. D.; Fellman, J. K.; Powers, J. R. Physical and Chemical Stability of Refractance Window-Dried Mango (Philippine ‘‘‘Carabao’ var.) Powder during Storage. Drying Technol. 2017, 35, 25–37. DOI: https://doi.org/10.1080/07373937.2016.1157601.
- Chaux-Gutiérrez, A. M.; Santos, A. B.; Granda-Restrepo, D. M.; Mauro, M. A. Foam Mat Drying of Mango: Effect of Processing Parameters on the Drying Kinetics and Product Quality. Drying Technol. 2017, 35, 631–641. DOI: https://doi.org/10.1080/07373937.2016.1201486.
- Merkus, H. G. Particle Size Measurements – Fundamentals, Practice, Quality. Particle Technology Series; Springer: Netherlands, 2009.
- Steffe, J. F. Rheological Methods in Food Process Engineering. Freeman Press: East Lansing, MI, 1996.
- Adhikari, B.; Howes, T.; Bhandari, B. R.; Truong, V. Stickiness in Foods: A Review of Mechanisms and Test Methods. Int. J. Food Prop. 2001, 4, 1–33. DOI: https://doi.org/10.1081/JFP-100002186.
- López-Córdoba, A.; Goyanes, S. Food Powder Properties. In Reference Module in Food Science, Smithers, G. W., Ed.; Elsevier: Amsterdam, Netherlands, 2016, pp 1–7. DOI: https://doi.org/10.1016/B978-0-08-100596-5.21198-0.
- Barnes, H. A.; Hutton, J. F.; Walters, K. An Introduction to Rheology. Elsevier Science Publishers: Amsterdam, 1989.
- Fellows, P. Food Processing Technology, Principles and Practice. CRC Press LLC: Boca Raton, 2000.
- Chen, X. D.; Mujumdar, A. S. Drying Technologies in Food Processing. Blackwell Publishing Ltd.: Hoboken, 2008.
- Choi, Y. H.; Yoo, B. Characterization of Time-Dependent Flow Properties of Food Suspensions. Int. J. Food Sci. Tech. 2004, 39, 801–805. DOI: https://doi.org/10.1111/j.1365-2621.2004.00830.x.
- Servais, C.; Jones, R.; Roberts, I. The Influence of Particle Size Distribution on the Processing of Food. J. Food Eng. 2002, 51, 201–208. DOI: https://doi.org/10.1016/S0260-8774(01)00056-5.