References
- Rantanen, J.; Khinast, J. The Future of Pharmaceutical Manufacturing Sciences. J. Pharm. Sci. 2015, 104, 3612–3638. DOI: https://doi.org/10.1002/jps.24594.
- Dufour, P. Control Engineering in Drying Technology: Review and Trends. Dry. Technol. 2006, 24, 889–904. DOI: https://doi.org/10.1080/07373930600734075.
- Aghbashlo, M.; Sotudeh-Gharebagh, R.; Zarghami, R.; Mujumdar, A. S.; Mostoufi, N. Measurement Techniques to Monitor and Control Fluidization Quality in Fluidized Bed Dryers: A Review. Dry. Technol. 2014, 32, 1005–1051. DOI: https://doi.org/10.1080/07373937.2014.899250.
- Simon, L. L.; Pataki, H.; Marosi, G. R. Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review. Org. Process Res. Dev. 2015, 19, 3–62.
- Wang, H. G.; Yang, W. Q. Application of Electrical Capacitance Tomography in Circulating Fluidised Beds – A Review. Appl. Therm. Eng. 2020, 176, 115311. DOI: https://doi.org/10.1016/j.applthermaleng.2020.115311.
- Karimi, F.; Sotudeh-Gharebagh, R.; Zarghami, R.; Mostoufi, N. Monitoring the Moisture Content of Solids in Fluidized Bed Dryers by Analysis of Pressure Fluctuations. Dry. Technol. 2011, 29, 1697–1704. DOI: https://doi.org/10.1080/07373937.2011.598984.
- Dong, P.; Li, Z.; Gao, X.; Wu, Z.; Zheng, Z. Evaluation of Hydrodynamic Behavior of a Fluidized Bed Dryer by Analysis of Pressure Fluctuation. Dry. Technol. 2013, 31, 1170–1176. DOI: https://doi.org/10.1080/07373937.2013.781621.
- Silva, O.; Rocha, S.; Marsal, S. The Influence of the Moisture Content of Microcrystalline Cellulose on the Coating Process in a Fluidised Bed. Braz. J. Chem. Eng. 2004, 21, 325–333. DOI: https://doi.org/10.1590/S0104-66322004000200023.
- Silva, C. A. M.; Parise, M. R.; Silva, F. V.; Taranto, O. P. Control of Fluidised Bed Coating Particles Using Gaussian Spectral Pressure Distribution. Powder Technol. 2011, 212, 445–458. DOI: https://doi.org/10.1016/j.powtec.2011.07.007.
- Che, H. Q.; Wang, H. G.; Ye, J. M.; Yang, W. Q. Control of Pellets coating in a Wurster Fluidised Bed by Means of Electrical Capacitance Tomography. Trans. Inst. Meas. Control 2020, 42, 729–742. DOI: https://doi.org/10.1177/0142331219875349.
- Chaplin, G.; Pugsley, T.; Lee, L. V. D.; Kantzas, A.; Winters, C. The Dynamic Calibration of an Electrical Capacitance Tomography Sensor Applied to the Fluidised Bed Drying of Pharmaceutical Granule. Meas. Sci. Technol. 2005, 16, 1281–1290. DOI: https://doi.org/10.1088/0957-0233/16/6/007.
- Makkawi, Y. T.; Wright, P. C. Fluidisation Regimes in a Conventional Fluidised Bed Characterized by Means of Electrical Capacitance Tomography. Chem. Eng. Sci. 2002, 57, 2411–2437. DOI: https://doi.org/10.1016/S0009-2509(02)00138-0.
- Sdayria, A.; Ouledsaad, F.; Sghaier, J.; Nissinen, A.; Vauhkonen, M.; Elcafsi, A. In-Line Monitoring of Drying Kinetics of a Fixed Bed Using an Electrical Imaging Technique. Dry. Technol. 2015, 33, 1530–1542.
- Wang, H. G.; Zhang, J. L.; Ramli, M. F.; Mao, M. X.; Ye, J. M.; Yang, W. Q.; Wu, Z. P. Imaging Wet Granules with Different Flow Patterns by Electrical Capacitance Tomography and Microwave Tomography. Meas. Sci. Technol. 2016, 27, 114007. 12pp. DOI: https://doi.org/10.1088/0957-0233/27/11/114007.
- Warsito, W.; Fan, L. S. Dynamics of Spiral Bubble Plume Motion in the Entrance Region of Bubble Columns and Three-Phase Fluidised Beds Using 3D ECT. Chem. Eng. Sci. 2005, 60, 6073–6084. DOI: https://doi.org/10.1016/j.ces.2005.01.033.
- Che, H. Q.; Wang, H. G.; Ye, J. M.; Yang, W. Q.; Wu, Z. P. Application of Microwave Tomography to Investigation the Wet Gas–Solids Flow Hydrodynamic Characteristics in a Fluidised Bed. Chem. Eng. Sci. 2018, 180, 20–32. DOI: https://doi.org/10.1016/j.ces.2018.01.032.
- Wang, H. G.; Yang, W. Q.; Senior, P.; Raghavan, R. S.; Duncan, S. R. Investigation of Batch Fluidised-Bed Drying by Mathematical Modeling, CFD Simulation and ECT Measurement. AIChE J. 2008, 54, 427–444. DOI: https://doi.org/10.1002/aic.11406.
- Wu, Z. P. Microwave Tomography as a New Modality for Biomedical and Biopharmaceutical Imaging. Proc. of 2015 Int. Conf. on Medicine and Biopharmaceutical, China, 15–16 August, 2015.
- Wu, Z.; McCann, H.; Davis, L. E.; Hu, J.; Fontes, A.; Xie, C. G. Microwave-Tomographic System for Oil- and Gas-Multiphase-Flow Imaging. Meas. Sci. Technol. 2009, 20, 104026. 8pp. DOI: https://doi.org/10.1088/0957-0233/20/10/104026.
- Wang, H. G.; Che, H. Q.; Ye, J. M.; Tu, Q. Y.; Wu, Z. P.; Yang, W. Q.; Ocone, R. Application of Process Tomography in Gas–Solids Fluidised Beds in Different Scales and Structures. Meas. Sci. Technol. 2018, 29, 044001. 13pp. DOI: https://doi.org/10.1088/1361-6501/aaa509.
- Joachimowicz, N.; Pichot, C.; Hugonin, J. P. Inverse Scattering: An Iterative Numerical Method for Electromagnetic Imaging. IEEE Trans. Antennas Propagat. 1991, 39, 1742–1752. DOI: https://doi.org/10.1109/8.121595.
- Wu, Z. P.; Wang, H. G. Microwave Tomography for Industrial Process Imaging: Example Applications and Experimental Results. IEEE Antennas Propag. Mag. 2017, 99, 1–12.
- Xie, C. G.; Huang, S. M.; Hoyle, B. S.; Thorn, R.; Lenn, C.; Snowden, D.; Beck, M. S. Electrical Capacitance Tomography for Flow Imaging: System Model for Development of Image Reconstruction Algorithms and Design of Primary Sensors. IEE Proc. F Radar. Signal. Process. UK 1992, 139, 89–98. DOI: https://doi.org/10.1049/ip-g-2.1992.0015.
- Mallach, M.; Gebhardt, P.; Musch, T. 2D Microwave Tomography System for Imaging of Multiphase Flows in Metal Pipes. Flow Meas. Instrum. 2017, 53, 80–88. DOI: https://doi.org/10.1016/j.flowmeasinst.2016.04.002.
- Semenov, S. Microwave Tomography: review of the Progress Towards Clinical Applications, Philosophical Transactions of the Royal Society A: Mathematical. Philos. Trans. A Math. Phys. Eng. Sci. 2009, 367, 3021–3042. DOI: https://doi.org/10.1098/rsta.2009.0092.
- Wang, H. G.; Lin, Y. L.; Yang, W. Q. Investigation and Analysis of a Fluidized Bed Dryer by Process Tomography Sensor. Pet. Sci. 2020, 17, 525–536. DOI: https://doi.org/10.1007/s12182-019-00406-z.
- Wang, H. G.; Yang, W. Q.; Dyakowski, T.; Liu, S. Study of Bubbling and Slugging Fluidised Beds by Simulation and Electrical Capacitance Tomography. AIChE J. 2006, 52, 3078–3087. DOI: https://doi.org/10.1002/aic.10904.
- Kunii, D.; Levenspiel, O. Fluidization Engineering; Butterworth Heinemann: Boston, 1991; p 69.
- Wang, H. G.; Senior, P. R.; Mann, R.; Yang, W. Q. Online Measurement and Control of Solids Moisture in Fluidised Bed Dryers. Chem. Eng. Sci. 2009, 64, 2893–2902. DOI: https://doi.org/10.1016/j.ces.2009.03.014.
- Qiu, G. Z.; Ye, J. M.; Wang, H. G.; Yang, W. Q. Investigation of Flow Hydrodynamics and Regime Transition in a Gas–Solids Fluidized Bed with Different Riser Diameters. Chem. Eng. Sci. 2014, 116, 195–207. DOI: https://doi.org/10.1016/j.ces.2014.05.006.
- Zhang, M.; Ma, L.; Soleimani, M. Dual-Modality ECT-MIT Multi-Phase Flow Imaging. Flow Meas. Instrum. 2015, 46, 240–254. DOI: https://doi.org/10.1016/j.flowmeasinst.2015.03.005.