References
- Kontziampasis, D.; Boulousis, G.; Smyrnakis, A.; Ellinas, K.; Tserepi, A.; Gogolides, E. Biomimetic, Antireflective, Superhydrophobic and Oleophobic PMMA and PMMA-Coated Glass Surfaces Fabricated by Plasma Processing. Microelectron. Eng 2014, 121, 33–38. DOI: https://doi.org/10.1016/j.mee.2014.02.027.
- Trentin, A.; de L. Gasparini, A.; Faria, F. A.; Harb, S. V.; dos Santos, F. C.; Pulcinelli, S. H.; Santilli, C. V.; Hammer, P. Barrier Properties of High Performance PMMA-Silica Anticorrosion Coatings. Prog. Org. Coat 2020, 138, 105398. DOI: https://doi.org/10.1016/j.porgcoat.2019.105398.
- More, A. P.; Kokate, S. R.; Mhaske, S. T. Development of Transparent Antimicrobial Scratch-Resistant Sol-Gel Coating for PMMA Surface. Arab. J. Sci. Eng. 2018, 43, 3521–3528. DOI: https://doi.org/10.1007/s13369-017-2877-4.
- Liu, J. L.; Jiao, X. J.; Cheng, F.; Fan, Y. X.; Wu, Y. F.; Yang, X. F. Fabrication and Performance of UV Cured Transparent Silicone Modified Polyurethane–Acrylate Coatings with High Hardness Good Thermal Stability and Adhesion. Prog. Org. Coat 2020, 144, 105673. DOI: https://doi.org/10.1016/j.porgcoat.2020.105673.
- Velaga, S. P.; Nikjoo, D.; Vuddanda, P. R. Experimental Studies and Modeling of the Drying Kinetics of Multicomponent Polymer Films. AAPS PharmSciTech 2018, 19, 425–435. DOI: https://doi.org/10.1208/s12249-017-0836-8.
- Curak, M.; Saranjam, N.; Chandra, S. Colour Variation in Drying Paint Films. Prog. Org. Coat 2019, 136, 105173. DOI: https://doi.org/10.1016/j.porgcoat.2019.06.019.
- Dana, B.; Svetlana, V.; Silvija, K. The Sol-Gel Technology Application of Cotton Textile Processing. J. Text. I 2016, 107, 1381–1385. DOI: https://doi.org/10.1080/00405000.2015.1114767.
- Arya, K. R. Measurement of Concentration Profiles in Thin Film Binary Polymer-Solvent Coatings Using Confocal Raman Spectroscopy: Free Volume Model Validation. Dry. Technol 2014, 32, 992–1002. DOI: https://doi.org/10.1080/07373937.2014.880714.
- Xia, Z. B.; Xu, W. P.; Chen, H. Q. Film-Formation Process of Acrylic Polyurethane Coating System (II) Modeling and Simulation. Ciesc J 2003, 10, 1446–1449.
- Bai, G. P. Research on the Characteristics of Hot Air Impinging Jet Drying and the Energy-Saving Optimization Design of the Film Coating Line. Ph. D. Dissertation, Hunan University, Hunan, China, 2016.
- He, S. M. A Study of Adhesive Thin-Film Layer Drying Process. Ph. D. Dissertation, East China University of Science and Technology, Shanghai, China, 2012.
- Pathania, A.; Sharma, J.; Arya, R. K.; Ahuja, S. Effect of Crosslinked Polymer Content on Drying of Binary Polymer—Solvent Coatings. Prog. Org. Coat 2018, 114, 78–89. DOI: https://doi.org/10.1016/j.porgcoat.2017.10.002.
- Silva, M. A. D.; Bierhalz, A. C. K.; Kieckbusch, T. G. Influence of Drying Conditions on Physical Properties of Alginate Films. Dry. Technol 2012, 30, 72–79. DOI: https://doi.org/10.1080/07373937.2011.620727.
- Tang, T.; Lu, Z.; Zhou, G.; Jia, W. D.; Wang, M. Effect of Air Velocity in Dehumidification Drying Environment on One-Component Waterborne Wood Top Coating Drying Process. Dry. Technol 2016, 34, 1583–1592. DOI: https://doi.org/10.1080/07373937.2015.1137582.
- Limousin, E.; González, E.; Martínez-Tong, D. E.; Ballard, N.; Asua, J. M. Modelling the Dynamic Development of the Curing Process and Film Morphology of Films Cast from Waterborne Acrylic-Alkyd Hybrids. Chem. Eng. J 2020, 400, 125891. DOI: https://doi.org/10.1016/j.cej.2020.125891.
- Mou, X. Z.; Chen, Z. Q. Pore-Scale Simulation of Heat and Mass Transfer in Deformable Porous Media. Int. J. Heat Mass Tran 2020, 158, 119878. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2020.119878.
- Li, P.; Chen, Z.; Yan, Y. Numerical Simulation of Heat and Moisture Transfer in Fibrous Porous Media Dehydration Process with Ultrasound Assisted. Int. J. Heat Mass Tran 2019, 142, 118443. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2019.118443.
- Danner, R. P. Measuring and Correlating Diffusivity in Polymer–Solvent Systems Using Free-Volume Theory. Fluid Phase Equilib. 2014, 362, 19–27. DOI: https://doi.org/10.1016/j.fluid.2013.08.013.
- Bhargava, C. K.; Arya, R. K. Design of Binary Polymeric Coatings for Minimizing the Residual Solvent Part I: Experimentation. Dry. Technol 2015, 33, 92–102. DOI: https://doi.org/10.1080/07373937.2014.936557.
- Reis, R. A.; Vladimir, O. J.; Nobrega, R. Diffusion Coefficients in Polymer-Solvent Systems for Highly Concentrated Polymer Solutions. Braz. J. Chem. Eng. 2001, 18, 367–384. DOI: https://doi.org/10.1590/S0104-66322001000400003.
- Arya, R. K.; Tewari, K.; Shukla, S. Non-Fickian Drying of Binary Polymeric Coatings: Depth Profiling Study Using Confocal Raman Spectroscopy. Prog. Org. Coat 2016, 95, 8–19. DOI: https://doi.org/10.1016/j.porgcoat.2016.02.004.
- Price, P. E.; Wang, S.; Romdhane, I. H. Extracting Effective Diffusion Parameters from Drying Experiments. AIChE J. 1997, 43, 1925–1934. DOI: https://doi.org/10.1002/aic.690430802.
- Katariya, J.; Arya, R. K. Drying of Binary Thin Film Polymeric Coatings: An Experimental Study. Polish J. Chem. Technol 2012, 14, 83–87. DOI: https://doi.org/10.1080/07373937.2014.924526.