References
- Marrangoni, A. G.; Cecchini, L. P. Homotransplantation of Arterial Segments Preserved by the Freeze-Drying Method. Ann. Surg 1951, 134, 977–983. DOI: https://doi.org/10.1097/00000658-195112000-00006.
- Adams, G. D. J. Freeze-Drying of Biological Materials. Dry. Technol 1991, 9, 891–925. DOI: https://doi.org/10.1080/07373939108916727.
- Ward, M. A.; Kaneko, T.; Kusakabe, H.; Biggers, J. D.; Whittingham, D. G.; Yanagimachi, R. Long-Term Preservation of Mouse Spermatozoa after Freeze-Drying and Freezing without Cryoprotection. Biol. Reprod. 2003, 69, 2100–2108. DOI: https://doi.org/10.1095/biolreprod.103.020529.
- Marques, L. G.; Silveira, A. M.; Freire, J. T. Freeze-Drying Characteristics of Tropical Fruits. Dry. Technol. 2006, 24, 457–463. DOI: https://doi.org/10.1080/07373930600611919.
- Sadikoglu, H.; Ozdemir, M.; Seker, M. Freeze-Drying of Pharmaceutical Products: Research and Development Needs. Dry. Technol. 2006, 24, 849–861. DOI: https://doi.org/10.1080/07373930600734018.
- Zhang, G. M.; Wang, D. S. Experimental Study on Grafting of Lyophilized Allogenic Vessels in Rats. J. Refrig. (CHN) 1982, 4, 54–59. DOI: CNKI:SUN:ZLXB.0.1982-04-007.
- Yin, M.; Liu, M. F.; Cao, Q.; Wu, J. Q.; Tao, L. R.; Liu, J. F. Effect of Pre-Freezing Rate on Porosity Ratio and Mechanical Property of Pig Aorta. Front. Bioence 2012, 17, 575–582. DOI: https://doi.org/10.2741/3945.
- Sheridan, W. S.; Duffy, G. P.; Murphy, B. P. Optimum Parameters for Freeze-Drying Decellularized Arterial Scaffolds. Tissue Eng. Part C - Me 2013, 19, 981–990. DOI: https://doi.org/10.1089/ten.tec.2012.0741.
- Liu, M. F.; Tao, L. R.; Yin, M.; Cao, Q. Optimization of the Freeze-Drying Method for Pig Aorta. J. Eng. Thermophys - CHN 2013, 34, 1142–1145.
- Gui, C.; Tao, L. R.; Zhang, Y. Q. Experimental Study on Improvement of Freeze-Drying Process for Porcine Aorta. Dry. Technol. 2020, 1–15. DOI: https://doi.org/10.1080/07373937.2020.1802744.
- Sandall, O. C.; King, C. J.; Wilke, C. R. The Relation between Transport Properties and Rates of Freeze-Drying of Poultry Meat. AIChE J. 1967, 13, 428–438. DOI: https://doi.org/10.1002/aic.690130309.
- Kumagai, H.; Nakamura, K.; Yano, T. Rate Analysis of Freeze Drying of a Model System by a Uniformly Retreating Ice Front Model. J. Agr. Chem. Soc. JPN 1991, 55, 731–736. DOI: https://doi.org/10.1080/00021369.1991.10870659.
- Hoshino, T.; Nakamura, K. Freeze-Drying of Soybean Protein Solution Containing Added Oil: Effects of Freezing Conditions on Drying Rate. FSTI. 1995, 1, 58–64. DOI: https://doi.org/10.3136/fsti9596t9798.1.58.
- Zarkarian, J. A.; King, C. J. Asymmetry in Freeze-Drying. J. Food Sci. 1978, 43, 992–997. DOI: https://doi.org/10.1111/j.1365-2621.1978.tb02469.x.
- Cheng, J.; Yang, Z. R.; Chen, H. Q. Analytical Solutions for the Moving Interface Problem in Freeze-Drying with or without Back Heating. Dry. Technol. 2002, 20, 553–567. DOI: https://doi.org/10.1081/DRT-120002817.
- Claussen, I. C.; Andresen, T.; Eikevik, T. M.; Strømmen, I. Atmospheric Freeze Drying—Modeling and Simulation of a Tunnel Dryer. Dry. Technol 2007, 25, 1959–1965. DOI: https://doi.org/10.1080/07373930701727275.
- Dyer, D. F.; Sunderland, J. E. Heat and Mass Transfer Mechanisms in Sublimation Dehydration. J. Heat Trans. T. ASME 1968, 90, 379–384. DOI: https://doi.org/10.1115/1.3597526.
- Passey, A. D.; Moreau, J. R. Quasi-Steady State Mathematical Model for a Spherical Freeze-Drying Particle. Can. I. Food Sci. Technol. J 1973, 6, 270–279. DOI: https://doi.org/10.1016/S0315-5463(73)74039-6.
- Lombrafia, J. I.; Izkara, J. Experimental Estimation of Effective Transport Coefficients in Freeze Drying for Simulaton and Optimization Purposes. Dry. Technol. 1996, 14, 743–763. DOI: https://doi.org/10.1080/07373939608917123.
- Araki, T.; Sagara, Y.; Tambunan, A. H.; Abdullah, K. Measurement of Transport Properties for the Dried Layer of Several Food Materials Undergoing Freeze-Drying. Jurnal Keteknikan Pertanian 1998, 12, 18–31.
- Farid, M.; Butcher, S. A Generalized Correlation for Heat and Mass Transfer in Freezing, Drying, Frying, and Freeze Drying. Dry. Technol. 2003, 21, 231–247. DOI: https://doi.org/10.1081/DRT-120017745.
- Smith, M. C.; Farid, M. A Single Correlation for the Prediction of Dehydration Time in Drying and Frying of Samples Having Different Geometry and Size. J. Food Eng. 2004, 63, 265–271. DOI: https://doi.org/10.1016/j.jfoodeng.2003.07.008.
- Liapis, A. I.; Litchfield, R. J. Optimal Control of a Freeze Dryer—i Theoretical Development and Quasi Steady State Analysis. Chem. Eng. Sci. 1979, 34, 975–981. DOI: https://doi.org/10.1016/0009-2509(79)85009-5.
- Litchfield, R. J.; Liapis, A. I. An Adsorption-Sublimation Model for a Freeze Dryer. Chem. Eng. Sci. 1979, 34, 1085–1090. DOI: https://doi.org/10.1016/0009-2509(79)85013-7.
- Liapis, A. I.; Marchello, J. M. Freeze Drying a Frozen Liquid in a Phial. Dry. Technol. 1983, 2, 203–217. DOI: https://doi.org/10.1080/07373938308959825.
- Liapis, A. I.; Bruttini, R. A Theory for the Primary and Secondary Drying Stages of the Freeze-Drying of Pharmaceutical Crystalline and Amorphous Solutes: Comparison between Experimental Data and Theory. Sep. Technol. 1994, 4, 144–155. DOI: https://doi.org/10.1016/0956-9618(94)80017-0.
- Liapis, A. I.; Bruttini, R. Freeze-Drying of Pharmaceutical Crystalline and Amorphous Solutes in Vials: Dynamic Multi-Dimensional Models of the Primary and Secondary Drying Stages and Qualitative Features of the Moving Interface. Dry. Technol. 1995, 13, 43–72. DOI: https://doi.org/10.1080/07373939508916942.
- Sadikoglu, H.; Liapis, A. I. Mathematical Modelling of the Primary and Secondary Drying Stages of Bulk Solution Freeze-Drying in Trays: Parameter Estimation and Model Discrimination by Comparison of Theoretical Results with Experimental Data. Dry. Technol. 1997, 15, 791–810. DOI: https://doi.org/10.1080/07373939708917262.
- Sheehan, P.; Liapis, A. I. Modeling of the Primary and Secondary Drying Stages of the Freeze Drying of Pharmaceutical Products in Vials: Numerical Results Obtained from the Solution of a Dynamic and Spatially Multi-Dimensional Lyophilization Model for Different Operational Policies. Biotechnol. Bioeng. 1998, 60, 712–728. DOI: https://doi.org/10.1002/(SICI)1097-0290(19981220)60:63.0.CO;2-4.
- Sadikoglu, H.; Liapis, A. I.; Crosser, O. K. Optimal Control of the Primary and Secondary Drying Stages of Bulk Solution Freeze Drying in Trays. Dry. Technol. 1998, 16, 399–431. DOI: https://doi.org/10.1080/07373939808917417.
- Gan, K. H.; Bruttini, R.; Crosser, O. K.; Liapis, A. I. Freeze-Drying of Pharmaceuticals in Vials on Trays: Effects of Drying Chamber Wall Temperature and Tray Side on Lyophilization Performance. Int. J. Heat Mass Transf. 2005, 48, 1675–1687. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2004.12.004.
- Liapis, A. I.; Bruttini, R. Exergy Analysis of Freeze Drying of Pharmaceuticals in Vials on Trays. Int. J. Heat Mass Transf. 2008, 51, 3854–3868. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2007.11.048.
- Aydin, E. S.; Yucel, O.; Sadikoglu, H. Modelling and Simulation of a Moving Interface Problem: Freeze Drying of Black Tea Extract. Heat Mass Transf. 2017, 53, 2143–2154. DOI: https://doi.org/10.1007/s00231-017-1974-y.
- Li, S.; Stawczyk, J.; Zbicinski, I. CFD Model of Apple Atmospheric Freeze Drying at Low Temperature. Dry Technol. 2007, 25, 1331–1339. DOI: https://doi.org/10.1080/07373930701438907.
- El-Maghlany, W. M.; Bedir, A. E.-R.; Elhelw, M.; Attia, A. Freeze-Drying Modeling via Multi-Phase Porous Media Transport Model. Int. J. Therm. Sci. 2019, 135, 509–522. DOI: https://doi.org/10.1016/j.ijthermalsci.2018.10.001.
- Srinivasan, G.; Muneeshwaran, M.; Raja, B. Numerical Investigation of Heat and Mass Transfer Behavior of Freeze Drying of Milk in Vial. Heat Mass Transf. 2019, 55, 2073–2081. DOI: https://doi.org/10.1007/s00231-018-02538-1.
- Milton, N.; Pikal, M. J.; Roy, M. L.; Nail, S. L. Evaluation of Manometric Temperature Measurement as Method of Monitoring Product Temperature during Lyophilization. Pad. J. Pharm. Technol. 1997, 51, 7–16. DOI: https://doi.org/10.1111/j.1540-8159.1997.tb04849.x.
- Liapis, A. I.; Sadikoglu, H. Dynamic Pressure Rise in the Drying Chamber as a Remote Sensing Method for Monitoring the Temperature of the Product during the Primary Drying Stage of Freeze Drying. Dry. Technol. 1998, 16, 1153–1171. DOI: https://doi.org/10.1080/07373939808917458.
- Chouvenc, P.; Vessot, S.; Andrieu, J.; Vacus, P. Optimization of the Freeze-Drying Cycle: A New Model for Pressure Rise Analysis. Dry. Technol. 2004, 22, 1577–1601. DOI: https://doi.org/10.1081/DRT-200025605.
- Barresi, A. A.; Velardi, S. A.; Pisano, R.; Rasetto, V.; Vallan, A.; Galan, M. In-Line Control of the Lyophilization Process. A Gentle PAT Approach Using Software Sensors. Int. J. Refrig. 2009, 32, 1003–1014. DOI: https://doi.org/10.1016/j.ijrefrig.2008.10.012.
- Pikal, M. Use of Laboratory Data in Freeze Drying Process Design: Heat and Mass Transfer Coefficients and the Computer Simulation of Freeze Drying. J. Parenter. Sci. Technol. 1985, 39, 115–139.
- Velardi, S. A.; Barresi, A. A. Development of Simplified Models for the Freeze-Drying Process and Investigation of the Optimal Operating Conditions. Chem. Eng. Res. Des. 2008, 86, 9–22. DOI: https://doi.org/10.1016/j.cherd.2007.10.007.
- Pisano, R.; Barresi, A. A.; Capozzi, L. C.; Novajra, G.; Oddone, I.; Vitale-Brovarone, C. Transfer of Lyophilized Products Based on X-Ray Micro-Computed Tomography Images. Dry. Technol. 2017, 35, 933–938. DOI: https://doi.org/10.1080/07373937.2016.1222540.
- Capozzi, L. C.; Barresi, A. A.; Pisano, R. A Multi-Scale Computational Framework for Modeling the Freeze-Drying of Microparticles in Packed-Beds. Powder Technol. 2019, 343, 834–846. DOI: https://doi.org/10.1016/j.powtec.2018.11.067.
- Capozzi, L. C.; Barresi, A. A.; Pisano, R. Supporting Data and Methods for the Multi-Scale Modelling of Freeze-Drying of Microparticles in Packed-Beds. Data Brief 2019, 22, 722–755. DOI: https://doi.org/10.1016/j.dib.2018.12.061.
- Incropera, F. P.; Dewitt, D. P.; Bergman, T. L.; Lavine, A. S. Fundamentals of Heat and Mass Transfer; John Wiley Sons: New Jersey, 2006.
- Huang, G. G.; Zhou, G. Y.; Li, C. X.; Hua, Z. Z. Study on Thermal Conductivity Probe for Thermal Conductivity of Artery at Low Temperature. Cryogenics 2005, 05, 49–52. DOI: CNKI:SUN:DWGC.0.2005-05-011.
- Johansen, O. Thermal Conductivity of Soils; University of Trondheim: Trondheim, 1977.
- Wu, J. Q.; Tao, L. R.; Liu, M. F.; Yin, M. Micro-CT Experimental Study concerning Movement Characteristics of Sublimation Interface in Freeze-Drying Preservation of the Artery. J. Clin. Rehabil. Tissue Eng. Res. 2010, 14, 1196–1199. DOI: https://doi.org/10.3969/j.issn.1673-8225.2010.07.013.
- Ganguly, A.; Nail, S. L.; Alexeenko, A. Experimental Determination of the Key Heat Transfer Mechanisms in Pharmaceutical Freeze-Drying. J. Pharm. Sci. 2013, 102, 1610–1625. DOI: https://doi.org/10.1002/jps.23514.
- Qin, Y. L. The Preliminary Research on Mechanical Properties of Aortic Wall and the Latent Relationship with Aortic Dissection Formation; The Second Military Medical University: Shanghai, 2006.