References
- Rantanen, J.; Maloney, T. C. Consolidation and Dewatering of a Microfibrillated Cellulose Fiber Composite Paper in Wet Pressing. Eur. Polym. J. 2015, 68, 585–591. DOI: https://doi.org/10.1016/j.eurpolymj.2015.03.045.
- Paulapuro, H. Papermaking: Stock Preparation and Wet End; Tappi Pr.: Helsinki, Finland, 2000.
- Sjöstrand, B. Dewatering Aspects at the Forming Section of the Paper Machine. Rewetting and Forming. Fabric Structure. Doctoral dissertation, Karlstads University, Stockholm, Sweden, 2017.
- Rantanen, J. J.; Dimic-Misic, K.; Pirttiniemi, J.; Kuosmanen, P.; Maloney, T. C. Forming and Dewatering of a Microfibrillated Cellulose Composite Paper. BioResources 2015, 10, 3492–3506. DOI: https://doi.org/10.15376/biores.10.2.3492-3506.
- Boufi, S.; Gonzalez, I.; Delgado-Aguilar, M.; Tarres, Q.; Pèlach, M. À.; Mutje, P. Nanofibrillated Cellulose as an Additive in Papermaking Process: A Review. Carbohydr. Polym. 2016, 154, 151–166. DOI: https://doi.org/10.1016/j.carbpol.2016.07.117.
- Taipale, T.; Ãsterberg, M.; Nykãnen, A.; Ruokolainen, J.; Laine, J. Effect of Microfibrillated Cellulose and Fines on the Drainage of Kraft Pulp Suspension and Paper Strength. Cellulose 2010, 17, 1005–1020. DOI: https://doi.org/10.1007/s10570-010-9431-9.
- Sjöstrand, B.; Barbier, C.; Ullsten, H.; Nilsson, L. Dewatering of Softwood Kraft Pulp with Additives of Microfibrillated Cellulose and Dialcohol Cellulose. BioResources 2019, 14, 6370–6383.
- Turbak, A. F.; Snyder, F. W.; Sandberg, K. R. Microfibrillated Cellulose, a New Cellulose Product: Properties, Uses, and Commercial Potential. J. Appl. Polym. Sci.: Appl. Polym. Symp. (United States) 1983, 37, 815–827.
- Attwood, B. W. A Study of Vacuum Box Operation. Pap. Technol. 1962, 3, 446–455.
- Åslund, P.; Vomhoff, H. Dewatering Mechanisms and Their Influence on Suction Box Dewatering Processes – A Literature Review. Nord. Pulp Pap. Res. J. 2008, 23, 389–397.
- Baldwin, L. High Vacuum Dewatering. Pap. Technol. 1997, 38, 23–28.
- Nordman, L. Laboratory Investigation of Water Removal by a Dynamic Suction Box. Tappi 1954, 37, 553–580.
- Åslund, P.; Vomhoff, H.; Waljanson, A. The Deformation of Chemical and Mechanical Pulp Webs during Suction Box Dewatering. Nord. Pulp Pap. Res. J. 2008, 23, 403–408.
- Ramaswamy, S. Vacuum Dewatering during Paper Manufacturing. Dry. Technol. 2003, 21, 685–717. DOI: https://doi.org/10.1081/DRT-120019058.
- Montgomery, J.; Green, S. I.; Vanerek, A. Paper Physics: Effect of Applied Vacuum Box Suction on Overall Retention in Hand Sheet Forming. Nord. Pulp Pap. Res. J. 2010, 25, 463–472.
- Nilsson, L. Air Flow and Compression Work in Vacuum Dewatering of Paper. Dry. Technol. 2014, 32, 39–46. DOI: https://doi.org/10.1080/07373937.2013.809732.
- Nilsson, L. Stepwise Development of a Mathematical Model for Air Flow in Vacuum Dewatering of Paper. Dry. Technol. 2014, 32, 1587–1597. DOI: https://doi.org/10.1080/07373937.2014.909844.
- Pujara, J.; Siddiqui, M. A.; Liu, Z.; Bjegovic, P.; Takagaki, S. S.; Li, P. Y.; Ramaswamy, S. Method to Characterize the Air Flow and Water Removal Characteristics during Vacuum Dewatering. Part II - Analysis and Characterization. Dry. Technol. 2008, 26, 341–348. DOI: https://doi.org/10.1080/07373930801898125.
- Räisänen, K. High-Vacuum Dewatering on a Paper Machine Wire Section: A Literature Review. Pap. Ja Puu 1996, 78, 113–120.
- Pires, E. C.; Springer, A. M.; Kumar, V. A New Technique for Specific Filtration Resistance Measurement. Tappi J. 1989, 72, 149–154.
- Wildfong, V. J.; Genco, J. M.; Shands, J. A.; Bousfield, D. W. Filtration Mechanics of Sheet Forming. Part I: Apparatus for Determination of Constant-Pressure Filtration Resistance. J. Pulp Pap. Sci. 2000, 26, 250–254.
- Räisänen, K. O.; Paulapuro, H.; Karrila, S. Wire Section Simulation with the Moving Belt Drainage Tester (MBDT). In Papermakers Conference; TAPPI Press, Atlanta, USA, April, 1993; p 103–133.
- Hubbe, M. A.; Heitmann, J. A. Review of Factors Affecting the Release of Water from Cellulosic Fibers during Paper Manufacture. BioResources 2007, 2, 500–533.
- Hubbe, M.; Sjöstrand, B.; Nilsson, L.; Koponen, A. I.; McDonald, D. Rate-Limiting Mechanisms of Water Removal during the Formation, Vacuum Dewatering, and Wet-Pressing of Paper Webs: A Review. BioResources 2020, 15 (4), 9672–9755.
- Horn, D.; Melzer, J. Influence of High-Molecular Cationic Dehydration Agents on Electrokinetic Properties of Pulp. Papier 1975, 29, 534–541.
- Gruber, E.; Grossmann, K.; Schempp, W. Interactions of Synthetic Cationic Polymers with Fibres and Fillers. 1. Wochenblatt FUR Pap. 1996, 124, 4.
- Pruden, B. The effect of fines on paper properties. Pap. Technol. 2005, 46, 19–26.
- Mörseburg, K.; Chinga-Carrasco, G. Assessing the Combined Benefits of Clay and Nanofibrillated Cellulose in Layered TMP-Based Sheets. Cellulose 2009, 16, 795–806. DOI: https://doi.org/10.1007/s10570-009-9290-4.
- Korhonen, M. Flocculation/Deflocculation of Cellulosic Materials and Mineral Particles by Polyelectrolyte Complexes and Nanocelluloses. Doctoral dissertation, Aalto University, Espoo, Finland, 2015.
- Maloney, T. C. Network Swelling of TEMPO-Oxidized Nanocellulose. Holzforschung 2015, 69, 207–213. DOI: https://doi.org/10.1515/hf-2014-0013.
- Merayo, N.; Balea, A.; de la Fuente, E.; Blanco, Á.; Negro, C. Synergies between Cellulose Nanofibers and Retention Additives to Improve Recycled Paper Properties and the Drainage Process. Cellulose 2017, 24, 2987–3000. DOI: https://doi.org/10.1007/s10570-017-1302-1.
- Sim, K.; Lee, J.; Lee, H.; Youn, H. J. Flocculation Behavior of Cellulose Nanofibrils under Different Salt Conditions and Its Impact on Network Strength and Dewatering Ability. Cellulose 2015, 22, 3689–3700. DOI: https://doi.org/10.1007/s10570-015-0784-y.
- Chen, L. C.; Chien, C. Y.; Chu, C. P.; Lee, D. J.; Hsieh, K. H.; Lee, C. H.; Liu, J. C. Conditioning and Dewatering of Pulp and Paper Sludge. Dry. Technol. 2002, 20, 967–988. DOI: https://doi.org/10.1081/DRT-120003772.
- Dimic-Misic, K.; Puisto, A.; Paltakari, J.; Alava, M.; Maloney, T. The Influence of Shear on the Dewatering of High Consistency Nanofibrillated Cellulose Furnishes. Cellulose 2013, 20, 1853–1864. DOI: https://doi.org/10.1007/s10570-013-9964-9.
- Dimic-Misic, K.; Puisto, A.; Gane, P.; Nieminen, K.; Alava, M.; Paltakari, J.; Maloney, T. The Role of MFC/NFC Swelling in the Rheological Behavior and Dewatering of High Consistency Furnishes. Cellulose 2013, 20, 2847–2861. DOI: https://doi.org/10.1007/s10570-013-0076-3.
- Hakovirta, M.; Aksoy, B.; Nichols, O.; Farag, R.; Ashurst, W. R. Functionalized Cellulose Fibers for Dewatering and Energy Efficiency Improvement. Dry. Technol. 2014, 32, 1401–1408. DOI: https://doi.org/10.1080/07373937.2014.887576.
- Korhonen, M.; Puisto, A.; Alava, M.; Maloney, T. The Effect of Pressure Pulsing on the Mechanical Dewatering of Nanofiber Suspensions. Chem. Eng. Sci. 2020, 212, 115267. DOI: https://doi.org/10.1016/j.ces.2019.115267.
- Wetterling, J.; Sahlin, K.; Mattsson, T.; Westman, G.; Theliander, H. Electroosmotic Dewatering of Cellulose Nanocrystals. Cellulose 2018, 25, 2321–2329. DOI: https://doi.org/10.1007/s10570-018-1733-3.
- Kinnunen, K.; Lehmonen, J.; Beletski, N.; Jetsu, P.; Hjelt, T. Benefits of Foam Forming Technology and Its Applicability in High MFC Addition Structures. In Proceedings of the 15th Fundamental Research Symposium. Advances in Pulp and Paper Research. The Pulp & Paper Fundamental Research Society, Cambridge, 2013, p. 837–850.
- Lehmonen, J.; Jetsu, P.; Kinnunen, K.; Hjelt, T. Potential of Foam-Laid Forming Technology in Paper Applications. Nord. Pulp Pap. Res. J. 2013, 28, 392–398. DOI: https://doi.org/10.3183/npprj-2013-28-03-p392-398.
- Timofeev, O.; Jetsu, P.; Kiiskinen, H.; Keränen, J. T. Drying of Foam-Formed Mats from Virgin Pine Fibers. Dry. Technol. 2016, 34, 1210–1218. DOI: https://doi.org/10.1080/07373937.2015.1103254.
- Lehmonen, J.; Retulainen, E.; Paltakari, J.; Kinnunen-Raudaskoski, K.; Koponen, A. Dewatering of Foam-Laid and Water-Laid Structures and the Formed Web Properties. Cellulose 2020, 27, 1120–1147. DOI: https://doi.org/10.1007/s10570-019-02913-z.
- Marui, T. An Introduction to Micro/Nano-Bubbles and Their Applications. Syst. Cybern. Informatics 2013, 11, 68–73.
- Tsuge, H. Micro-and Nanobubbles: Fundamentals and Applications; CRC Press: Pan Stanford, USA, 2014.
- Temesgen, T.; Bui, T. T.; Han, M.; Kim, T.; Park, H. Micro and Nanobubble Technologies as a New Horizon for Water-Treatment Techniques: A Review. Adv Colloid Interface Sci. 2017, 246, 40–51. DOI: https://doi.org/10.1016/j.cis.2017.06.011.
- Xu, Q.; Nakajima, M.; Ichikawa, S.; Nakamura, N.; Shiina, T. A Comparative Study of Microbubble Generation by Mechanical Agitation and Sonication. Innov. Food Sci. Emerg. Technol. 2008, 9, 489–494. DOI: https://doi.org/10.1016/j.ifset.2008.03.003.
- Calgaroto, S.; Wilberg, K. Q.; Rubio, J. On the Nanobubbles Interfacial Properties and Future Applications in Flotation. Miner. Eng. 2014, 60, 33–40. DOI: https://doi.org/10.1016/j.mineng.2014.02.002.
- Kim, S.; Kim, H.; Han, M.; Kim, T. Generation of Sub-Micron (Nano) Bubbles and Characterization of Their Fundamental Properties. Environ. Eng. Res. 2018, 24, 382–388. DOI: https://doi.org/10.4491/eer.2018.210.
- Etchepare, R.; Oliveira, H.; Nicknig, M.; Azevedo, A.; Rubio, J. Nanobubbles: Generation Using a Multiphase Pump, Properties and Features in Flotation. Miner. Eng. 2017, 112, 19–26. DOI: https://doi.org/10.1016/j.mineng.2017.06.020.
- Calgaroto, S.; Azevedo, A.; Rubio, J. Flotation of Quartz Particles Assisted by Nanobubbles. Int. J. Miner. Process 2015, 137, 64–70. DOI: https://doi.org/10.1016/j.minpro.2015.02.010.
- Calgaroto, S.; Azevedo, A.; Rubio, J. Separation of Amine-Insoluble Species by Flotation with Nano and Microbubbles. Miner. Eng. 2016, 89, 24–29. DOI: https://doi.org/10.1016/j.mineng.2016.01.006.
- Höke, U., & Schabel, S. Recycled Fibre and Deinking; Paper Engineers’ Association/Paperi ja Puu Oy, Helsinki, Finland, 2009.
- Kangas, H.; Lahtinen, P.; Sneck, A.; Saariaho, A.-M.; Laitinen, O.; Hellen, E. Characterization of Fibrillated Celluloses. A Short Review and Evaluation of Characteristics with a Combination of Methods. Nord. Pulp Pap. Res. J. 2014, 29, 129–143. DOI: https://doi.org/10.3183/npprj-2014-29-01-p129-143.
- Koponen, A.; Haavisto, S.; Liukkonen, J.; Salmela, J. Analysis of the Effects of Pressure Profile, Furnish, and Microfibrillated Cellulose on the Dewatering of Papermaking Furnishes. TJ 2015, 14, 325–337. DOI: https://doi.org/10.32964/TJ14.5.325.
- Britt, K. W.; Unbehend, J. E. Water Removal during Paper Formation. Tappi J. 1985, 68, 104–107.
- Dong, C.; Song, D.; Patterson, T.; Ragauskas, A.; Deng, Y. Energy Saving in Papermaking through Filler Addition. Ind. Eng. Chem. Res. 2008, 47, 8430–8435. DOI: https://doi.org/10.1021/ie8011159.
- Cameron, A. C.; Windmeijer, F. A. G. An R-Squared Measure of Goodness of Fit for Some Common Nonlinear Regression Models. J. Econ. 1997, 77, 329–342. DOI: https://doi.org/10.1016/S0304-4076(96)01818-0.
- Niskanen, K. Paper Physics; Papermaking Science and Technology: A Series of 19 Books; Finnish Paper Engineer’s Association/Paperi ja Puu Oy, Helsinki, Finland, 2008.
- Zhang, L.; Batchelor, W.; Varanasi, S.; Tsuzuki, T.; Wang, X. Effect of Cellulose Nanofiber Dimensions on Sheet Forming through Filtration. Cellulose 2012, 19, 561–574. DOI: https://doi.org/10.1007/s10570-011-9641-9.