Surface drying characteristic of early-age concrete considering cement hydration process

References

• Rezvani, M.; Proske, T.; Graubner, C. A. Modelling the Drying Shrinkage of Concrete Made with Limestone-Rich Cements. Cem. Concr. Res. 2019, 115, 160–175. DOI: 10.1016/j.cemconres.2018.09.003.
   Web of Science ®Google Scholar
• Zhang, J.; Wang, J.; Gao, Y. Moisture Movement in Early-Age Concrete under Cement Hydration and Environmental Drying. Mag. Concr. Res. 2016, 68, 391–408. DOI: 10.1680/jmacr.15.00293.
   Web of Science ®Google Scholar
• Dietl, C.; George, O. P.; Bansal, N. K. Modeling of Diffusion in Capillary Porous Materials during the Drying Process. Drying Technol. 1995, 13, 267–293. DOI: 10.1080/07373939508916953.
   Web of Science ®Google Scholar
• Zhang, J.; Hou, D.; Gao, Y.; Wei, S. Determination of Moisture Diffusion Coefficient of Concrete at Early Age from Interior Humidity Measurements. Drying Technol. 2011, 29, 689–696. DOI: 10.1080/07373937.2010.528106.
   Web of Science ®Google Scholar
• Li, Q.; Xu, S.; Zeng, Q. A Fractional Kinetic Model for Drying of Cement-Based Porous Materials. Drying Technol. 2016, 34, 1231–1242. DOI: 10.1080/07373937.2015.1103255.
   Web of Science ®Google Scholar
• Wei, Y.; Guo, W.; Zheng, X. Integrated Shrinkage, Relative Humidity, Strength Development, and Cracking Potential of Internally Cured Concrete Exposed to Different Drying Conditions. Drying Technol. 2016, 34, 741–752. DOI: 10.1080/07373937.2015.1072549.
   Web of Science ®Google Scholar
• Menzel, C. A. Causes and Prevention of Crack Development in Plastic Concrete. In Portland Cement Association Annual Meeting, Portland Cement Association, Illinois, 1954; pp 130–136.
   Google Scholar
• Uno, P. J. Plastic Shrinkage Cracking and Evaporation Formulas. ACI Mater. J. 1998, 95, 365–375.
   Web of Science ®Google Scholar
• Bakhshi, M.; Mobasher, B.; Zenouzi, M. Model for Early-Age Rate of Evaporation of Cement-Based Materials. J. Eng. Mech. 2012, 138, 1372–1380. DOI: 10.1061/(ASCE)EM.1943-7889.0000435.
   Web of Science ®Google Scholar
• Akita, H.; Fujiwara, T.; Ozaka, Y. A Practical Procedure for the Analysis of Moisture Transfer within Concrete Due to Drying. Mag. Concr. Res. 1997, 49, 129–137. DOI: 10.1680/macr.1997.49.179.129.
   Web of Science ®Google Scholar
• Zhang, J.; Wang, J.; Ding, X. Test and Simulation on Moisture Flow in Early Age Concrete under Drying. Drying Technol. 2018, 36, 221–233. DOI: 10.1080/07373937.2017.1315588.
   Web of Science ®Google Scholar
• Topcu, I.; Elgun, V. Influence of Concrete Properties on Bleeding and Evaporation. Cem. Concr. Res. 2004, 34, 275–281.
   Web of Science ®Google Scholar
• Wei, Y.; Guo, W.; Zhang, Q. A Model for Predicting Evaporation from Fresh Concrete Surface during the Plastic Stage. Drying Technol. 2020, 38, 2231–2241. DOI: 10.1080/07373937.2019.1691012.
   Web of Science ®Google Scholar
• Azenha, M.; Maekawa, K.; Ishida, T.; Faria, R. Drying Induced Moisture Losses from Mortar to the Environment. Part I: Experimental Research. Mater. Struct. 2007, 40, 801–811. DOI: 10.1617/s11527-007-9244-y.
   Web of Science ®Google Scholar
• Bian, C.; Wang, J.; Bai, X.; Hu, M.; Gang, T. Optical Fiber Based on Humidity Sensor with Improved Sensitivity for Monitoring Applications. Opt. Laser Technol. 2020, 130, 106342–106348. DOI: 10.1016/j.optlastec.2020.106342.
   Web of Science ®Google Scholar
• Bakhshi, M.; Mobasher, B.; Soranakom, C. Moisture Loss Characteristics of Cement-Based Materials under Early-Age Drying and Shrinkage Conditions. Constr. Build. Mater. 2012, 30, 413–425. DOI: 10.1016/j.conbuildmat.2011.11.015.
   Web of Science ®Google Scholar
• Oh, B. H.; Cha, S. W. Nonlinear Analysis of Temperature and Moisture Distributions in Early-Age Concrete Structures Based on Degree of Hydration. ACI Mater. J. 2003, 100, 361–370.
   Web of Science ®Google Scholar
• Di, L. G.; Cusatis, G. Hygro-Thermo-Chemical Modeling of High Performance Concrete. I: Theory. Cement and Concrete Composites 2009, 31, 301–308.
   Web of Science ®Google Scholar
• Schindler, A. K.; Folliard, K. J. Heat of Hydration Models for Cementitious Materials. ACI Mater. J. 2005, 102, 24–33.
   Web of Science ®Google Scholar
• Schutter, G. D.; Taerwe, L. Degree of Hydration-Based Description of Mechanical Properties of Early Age Concrete. Mat. Struct. 1996, 29, 335–344. DOI: 10.1007/BF02486341.
   Web of Science ®Google Scholar
• Schutter, G. D.; Taerwe, L. Specific Heat and Thermal Diffusivity of Hardening Concrete. Mag. Concr. Res. 1995, 47, 203–208. DOI: 10.1680/macr.1995.47.172.203.
   Web of Science ®Google Scholar
• Van Breugel, K. Simulation of Hydration and Formation of Structure in Hardening Cement Based Materials. Ph.D. thesis, The Netherlands: Technische Universiteit Delft, 1991.
   Google Scholar
• Larrard, F. Concrete Mixture proportioning-A Scientific Approach, CRC Press: New York, 1999; pp 77–221, Chapter 2.
   Google Scholar
• Han, Y. Studies and Controls on Shrinkage of Modern Concrete. Ph.D. thesis, Beijing: Tsinghua University, 2014.
   Google Scholar
• Kim, J. K.; Han, S. H.; Lee, K. M. Estimation of Compressive Strength by a New Apparent Activation Energy Function. Cem. Concr. Res. 2001, 31, 217–225. DOI: 10.1016/S0008-8846(00)00481-6.
   Web of Science ®Google Scholar
• Pane, I.; Hansen, W. Concrete Hydration and Mechanical Properties under Nonisothermal Conditions. ACI Mater. J. 2002, 99, 534–542.
   Web of Science ®Google Scholar
• Wiederhold, P. R. Water Vapor Measurement: Methods and Instrumentation, Macel Dekker, New York, 1997.
   Google Scholar
• Poling, B. E.; Prausnitz, J. M.; Connell, J. P. The Properties of Gases and Liquids, 5th ed., McGraw Hill, New York, 2000.
   Google Scholar
• Nellis, G.; S, K. Heat Transfer; Cambridge University Press, New York, 2009.
   Google Scholar
• Powers, T. C.; Brownyard, T. L. Studies of the Physical Properties of Hardened Portland Cement Paste. J. Proc. 1946, 43, 101–132.
   Google Scholar