Publication Cover
Drying Technology
An International Journal
Volume 42, 2024 - Issue 3
105
Views
0
CrossRef citations to date
0
Altmetric
Research Articles

A dynamic adjustment system for the variable opening porosities of slotted gas distributor applied to Geldart-D particles based on modified Ergun equation and drying rate

, , &
Pages 383-396 | Received 29 Nov 2022, Accepted 15 Jan 2023, Published online: 28 Jan 2023

References

  • Geldart, D. Types of Gas Fluidization. Powder Technol. 1973, 7, 285–292. DOI: 10.1016/0032-5910(73)80037-3.
  • Kundu, K. M.; Datta, A. B.; Chatterjee, P. K. Drying of Oilseeds. Drying Technol. 2001, 19, 343–358. DOI: 10.1081/DRT-100102909.
  • Atungulu, G. G.; Olatunde, G. A. Assessment of New in-Bin Drying and Storage Technology for Soybean Seed. Drying Technol. 2018, 36, 383–399. DOI: 10.1080/07373937.2017.1335751.
  • Gómez-Hernández, J.; Soria-Verdugo, A.; Briongos, J. V.; Santana, D. Multiresolution Analysis of a Drying Process in a Rotating-Distributor Fluidized Bed. Drying Technol. 2016, 34, 119–131. DOI: 10.1080/07373937.2015.1040886.
  • Aghbashlo, M.; Sotudeh-Gharebagh, R.; Zarghami, R.; Mujumdar, A. S.; Mostoufi, N. Measurement Techniques to Monitor and Control Fluidization Quality in Fluidized Bed Dryers: A Review. Drying Technol. 2014, 32, 1005–1051. DOI: 10.1080/07373937.2014.899250.
  • Xu, H. B.; Wang, W. Y.; Zhong, W. Q.; Ma, C.; Zhang, H. Experimental Study of Fluidization Characteristics of Geldart-D Particles in Pressurized Bubbling Fluidized Bed. Adv. Powder Technol. 2022, 33, 103453. DOI: 10.1016/j.apt.2022.103453.
  • Dalleffe, R. V.; Ferreira, M. C.; Freire, J. T. Drying of Pastes in Vibro-Fluidized Beds: Effects of the Amplitude and Frequency of Vibration. Drying Technol. 2005, 23, 1765–1781. DOI: 10.1080/07373930500209681.
  • Ciesielczyk, W. Novel Gas Distributor for Fluidized Bed Drying of Biomass. Drying Technol. 2009, 27, 1309–1315. DOI: 10.1080/07373930903383612.
  • Siegel, R. Effect of Distributor Plate-to-Bed Resistance Ratio on Onset of Fluidized-Bed Channeling. AIChE J. 1976, 22, 590–592. DOI: 10.1002/aic.690220325.
  • Jangam, S. V.; Mujumdar, A. S.; Thorat, B. N. Design of an Efficient Gas Distribution System for a Fluidized Bed Dryer. Drying Technol. 2009, 27, 1217–1228. DOI: 10.1080/07373930903266700.
  • Bauer, W.; Werther, J. The Role of Gas Distribution in Fluidized Bed Chemical Reactor Design. Chem. Eng. Commun. 2007, 18, 137–147. DOI: 10.1080/00986448208939963.
  • Li, Z. Y.; Wang, S. T.; Liu, P. D.; Gao, X. Y.; Xu, Q. Fluidization Characteristics of Geldart D Type Particles in a Fluidizing Bed with a Slotted Gas Distributor. J. TUST 2016, 31, 56–59. DOI: 10.13364/j.issn.1672-6510.20150156.
  • Li, Z. Y.; Wang, S. T.; Wang, J.; Zhang, J. G. Fluidization Effect of Walnut Shell Particles in Fluidized Bed with Slotted Gas Distributor. Trans. Chin. Soc. Agric. Eng. 2016, 32, 225–232. DOI: 10.11975/j.issn.1002-6819.2016.09.032.
  • Xu, Q.; Zhao, T.; Liu, P. D.; Shi, Y. P. Drying Characteristics of Green Peas in Fluidized Bed with Slotted Gas Distributor. Chem. Equip. Technol. 2018, 39, 20–25. DOI: 10.16759/j.cnki.issn.1007-7251.2018.06.005.
  • Liu, C. R.; Zhao, T.; Xu, Q.; Wang, R. F.; Li, Z. Y. Study on the Effect of Gas Distributor on Fluidization Performance of Gas-Solid Fluidized Bed. Packag. Food Mach. 2019, 37, 18–24. DOI: 10.3969/j.issn.1005-1295.2019.06.004.
  • Kundu, K. M.; Das, R.; Datta, A. B.; Chatterjee, P. K. On the Analysis of Drying Process. Drying Technol. 2005, 23, 1093–1105. DOI: 10.1081/DRT-200059140.
  • Chen, B.; Rao, H. H.; Zhang, L. Y.; Huang, D. S.; Liu, M. H. Camellia Fruit Stress Based on High-Speed Photography. J. Agric. Mech. Res. 2019, 41, 46–50. DOI: 10.13427/j.cnki.njyi.2019.12.008.
  • Fan, K. Structure and Properties of Three-Dimensional Needle-Punched Carbon Felt Reinforced Resin-Based Carbon Composites. MA Dissertation, Jiangnan University, Wuxi, CHN, 2019.
  • Narsimhan, G. On a Generalized Expression for Prediction of Minimum Fluidization Velocity. AIChE J. 1965, 11, 550–554. DOI: 10.1002/aic.690110335.
  • Baeyens, J.; Geldart, D. An Investigation into Slugging Fluidized Beds. Chem. Eng. Sci. 1974, 29, 255–265. DOI: 10.1016/0009-2509(74)85051-7.
  • Chen, Z. D.; Chen, X. P.; Wu, Y.; Chen, R. C. Study on Minimum Fluidization Velocity at Elevated Temperature. Proc. CSEE 2010, 30, 21–25. DOI: 10.13334/j.0258-8013.pcsee.2010.14.007.
  • Shahbaz, M.; Yusup, S.; Naz, M. Y.; Sulaiman, S. A.; Inayat, A.; Partama, A. F. o P. K. S. Palm Oil Fronds, and Empty Fruit Bunches in a Swirling Fluidized Bed Gasifier. Part. Sci. Technol. 2017, 35, 150–157. DOI: 10.1080/02726351.2016.1139021.
  • Freire, F. B.; Barrozo, M. A. S.; Sartori, D. J. M.; Freire, J. T. Study of the Drying Kinetics in Thin Layer: Fixed and Moving Bed. Drying Technol. 2005, 23, 1451–1464. DOI: 10.1081/DRT-200063508.
  • Dong, P. F.; Li, Z. Y.; Gao, X. Y.; Wu, Z. H.; Zheng, Z. C. Evaluation of Hydrodynamic Behavior of a Fluidized Bed Dryer by Analysis of Pressure Fluctuation. Drying Technol. 2013, 31, 1170–1176. DOI: 10.1080/07373937.2013.781621.
  • Koekemoer, A.; Luckos, A. Effect of Material Type and Particle Size Distribution on Pressure Drop in Packed Beds of Large Particles: Extending the Ergun Equation. Fuel 2015, 158, 232–238. DOI: 10.1016/j.fuel.2015.05.036.
  • Gao, X. Y.; Wang, J.; Wang, S. T.; Li, Z. Y. Modeling of Drying Kinetics of Green Peas by Reaction Engineering Approach. Drying Technol. 2016, 34, 437–442. DOI: 10.1080/07373937.2015.1060491.
  • Xu, Q.; Li, Z. Y.; Zhao, T. An Adjustable Fluidized Bed Uniform Air Distribution System and Its Control System. China Patent ZL 201710454870.X, February 26, 2019.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.