Publication Cover
Drying Technology
An International Journal
Volume 13, 1995 - Issue 3
50
Views
26
CrossRef citations to date
0
Altmetric
Original Articles

Flow, Heat Transfer and Particle Drying Characteristics in Confined Opposing Turbulent Jets: a Numerical Study

&
Pages 753-781 | Published online: 10 May 2007

REFERENCES

  • Tucker , C. L , and Suh , N. P. 1980 . Mixing for Reaction Injection Molding. I. Impingement Mixing of Liquids. Polymer Engineering and Science . Vol. 20 , No. 13 pp. 875 – 886 .
  • Nosseir , N. S. , Shabtay , B. 1986 . Characteristics of Jet Impingement in a Side-Dump Combustor. AlAA Journal . Vol. 24 , No. 11 . pp. 1752 – 1757 .
  • Nosseir , N. , Patel , U. and Hildebrand , G. 1987 . Pressure Field Generated by Jet-on- Jet Impingement. AlAA Journal , Vol. 25 . No. 10 , pp. 1312 – 1317 .
  • Kitron , Y. and Tamir , A. 1988 . Performance o f a Coaxial Gas-Solid Two- Impinging-Streams (TIS) Reactor: Hydrodynamics, Residence Time Distribution. and Drying Heat Transfer. Ind. Eng. Chem. Res , Vol. 27 , pp. 1760 – 1767 .
  • Wood , A. Hrymak , A. , Yeo , R. , Johnson , D , and Tyagi , A. 1991 . Experimental and Computational Studies of the Fluid Mechanics in an Opposed Jet Mixing Head. Phys. Fluids A3 ( 5 ). pp. 1362 – 1368 .
  • Kudra , T. , Mujumdar , A. S. and Meltser , V. L. 1991 , Impinging Stream Dryers; Principles, Practice and Potential. Dlying o f Solids . Sarita Prakashan , Meerut , India .
  • Tamir , A. 1992 . Impinging-Stream Conlactors: Fundamentals and Applications. Advances in Transport processes VIII , Ed. A. S. Mujumdar and R. A. Mashelkar Elsevier . New York . pp. 105 – 195 .
  • Mastorakos , E. , Taylor , A, M. K. P. and Whitelaw , I. H. 1992 . Extinction and Temperature Characteristics o f Turbulent Counterllow DiRusion Flames with Partial Premixing. Combustion and Flame , Vol. 91 . pp. 40 – 54 .
  • Mujumdar , A. S. 1981 . Plenary lecture . 32nd Indian Chemical Engineering Conference . Madras , India , Dec 14 – 17 .
  • Tamir , A. 1994 . Transport Processes in Impinging Streams. Elsevier , Amsterdam , ( In press) .
  • Jones , W. P. and Launder , B. E. 1972 . The Prediction of Laminarization with a Two-Equation Model of Turbulence. Int. I. Heat Mass Transfer , Vol. 15 , pp. 301 – 314 .
  • Saffman , P. G. 1965 . The Lift on a Small Sphere in a Slow Shear Flow. Journal of Fluid Mechanics . Vol. 22 . pp. 385 – 400 .
  • Schiller , L. and Nauman , A. Z. 1933 . Ver. Deut Ing 77 , pp. 318 – 320 .
  • Matsumoto , S. , Saito , S. 1979 . On the hlechanism of Suspension of Panicles in Horizontal Pneumatic Conveying: Monte Carlo Simulation Based on the Irregular Bouncing Model. J. Chem. Engng. Japan. Vol. 3 , pp. 83 – 92 .
  • Brauer , H. 1980 . Repon on Investigation on Panicle Movement in Straight Horizontal Tubes, Particle/Wall Collision and Erosion of Tubes and Tube Bands. J. Powder and Bulk Solids Technology . Vol. 4 , pp. 3 – 12 .
  • Crow. T. C. 1991 . The State-of-the-An in the Development of Numerical Models for Dispersed Phase Flows . Proceeding of the International Conference on Multiphase Flows ‘ 91 – Tsukuba Japan ’ pp. 49 – 60 .
  • Clift , R. , Grace , J. R. , and Weber , E. 1978 . Bubbles, Drops, and Particles. Academic Press . New York . U.S.A.
  • Thomas , F. Irvine , Jr. , and Hrtnett , P. 1976 . Steam and Air Tables in SI Units .
  • Van Doormal , J. P. , and Raithby , G. D. 1984 . Enhancements of the SIMPLE method for predicting incompressible fluid flows. Numerical Heat Transfer , Vol. 7. pp. 147 – 163 .
  • Patankar , S. V. , 1980 . Numerical heat transfer and fluid flow. McGraw-Hill book company , U.S.A.
  • Launder , B. 1991 . Current capabilities for modeling turbulence in industrial flows. Applied Science Research . Vol. 48 , pp. 247 – 269 .
  • Hosseinalipour , S. M. and Mujumdar , A. S. 1995 . A Comparative Evaluation of Different Turbulence Models for Impinging and Opposing Jet Flows. In Press .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.