References
- Anderson . D.M. ( 1990 ) Design for Manufacturability-Optimioillg Cost. Quality and Titne-to-Murkct , CIM Press. Lafayette , CA .
- Arkin . E.M. , Connelly . R. and Mitchell . J.S.B. ( 1989 ) On monotone paths among obstacles, with applications to planning assemblies. in Proceedings of the ACM Symposium on Comptational Geoometr. , ACM Press, Saabruckcn . Germany . pp. 334 – 343 .
- Beasley . D. and Martin . R.R. ( 1993 ) Disassembly sequences for objects built from unit cubes. Computer Aided Design , 25 ( 12 ). 751 – 761 .
- De-Fazio . T.L. and Whitney . D.E. ( 1987 ) Simplified generation of all mechanical assembly sequences. IEEE Transactions on Robotics and Automation. , 3 ( 6 ). 640 – 658 .
- Goldwasser . M. , Latornbc , J.C. and Motwani , R. ( 1996 ) Complexity measures for assembly sequences, in Proceedings of the Inteenational Conference Oil Robotics and Automation. , IEEE Press. Minneapolis . MN . pp. 1581 – 1587 .
- Halperin . O. , Latombc , J.C. and Wilson . R.H. ( 1998 ) A general framework for assembly planning-the motion space approach. Proceedings of the ACM Comp. Geometry , ACM Press. Minneapolis . MN . 9 – 15 .
- Homem de Mello . L.S. and Lee . S. ( 1991 ) Computer Aided Mechanical Assembly Planning , Kluwer Academic Publishers. Boston . MA .
- Homem de Mello . L.S. and Sanderson . A.C. ( 1991 ) Representations of mechanical assembly sequences. IEEE Transactions on Robotics and Automation , 7 ( 2 ). 211 – 227 .
- Jones . R.E. , Wilson . R.H. and Calton . T.L. ( 1997 ) Constraint based interactive assembly planning. in Proceedings of the International Conference on Robotics and Automation. , IEEE Press. Albuquerque . NM . pp. 913 – 920 .
- Kaufmann , S.G. , Wilson . R.H. , Jones . R.E. , Calton . T.L. and Ames . A.L. ( 1996 ) The Archimedes 2 mechanical assembly planning system. in Proceedings of the International Conference on Robotics and Automation , IEEE Press, Minneapolis . MN . pp. 3361 – 3368 .
- Lee . S. and Shin . Y.G. ( 1990 ) Assembly planning based on geometric reasoning. Computation and Graphics. , 14 ( 2 ), 237 – 250 .
- Lozano-Perez . T. ( 1983 ) Spatial planning: a configuration space approach. IEEE Transactions on Computers. , 32 ( 2 ). 108 – 120 .
- Mattikalli . R.S. and Khosla . P. ( 1992 ) Motion constrains from contact geometry: representation and analysis. in Proceedings of the International Conference on Robotics ami Automation. , IEEE Press. Nice . France . pp. 2178 – 2185 .
- Srinivasan . H. , Figueroa . R. and Gadh . R. ( 1999 ) Selective disassembly for virtual proiotyping as applied to de-manufacturing. Jounrnal of Robotics lind Computer lntegratcd Manufacturing , 15 ( 3 ). 231 – 245 .
- Srinivasan . H. and Gadh . R. ( 1998 ) A geometric algorithm for single selective disassembly using the wave propagation abstraction. Computer Aided Design. , 30 ( 8 ). 603 – 613 .
- Srinivasan . H. and Gadh , R. (2000) Efficient disassembly of multiple components from an assembly using wave propagation. ASME Journal of Mechanical Design. , 122 ( 2 ). 179 – 184 .
- Srinivasan . H. , Shyamsundar , N. and Gadh . R. ( 1997 ) A framework for virtual disassembly analysis. Journal of Intelligent Manufacturing , 8 ( 4 ). 277 – 295 .
- Wilson . R. H. , Kavraki . L. , Lozano-Perez . R. and Latombe . J.C. ( 1995 ) Two-handed assembly sequencing. International Journal of Robotics Research , 14 ( 4 ). 335 – 350 .
- Woo . T.C. and Dutra . D. ( 1991 ) Automatic disassembly and total ordering in three dimensions. ASME Journal of Engineering of Industry. , 113 ( 1 ). 207 – 213 .
- Xu . Y. , Mattikalli , R. and Khosla . P. ( 1995 ) Generation of partial medial axis for disassembly motion planning. Journal of Design and Monufacturing , 5 ( 2 ), 89 – 102 .