276
Views
10
CrossRef citations to date
0
Altmetric
Articles

Effect of CaCO3 on the Gaseous Reduction of Tin Oxide Under CO-CO2 Atmosphere

, , , , &

References

  • Alves, M. C. F., Marinho, R. M. M., Casali, G. P., Siu-Li, M., Deputier, S., Guilloux-Viry, M., Souza, A. G., Longo, E., Weber, I. T., Santos, I. M. G., and Bouquet, V., 2013, “Influence of the network modifier on the characteristics of MSnO3 (M=Sr and Ca) thin films synthesized by chemical solution deposition.” Journal of Solid State Chemistry France, 199, pp. 34–41.
  • Azad, A. M., and Hon, N. C., 1988, “Characterization of BaSnO3-based ceramics Part 1. Synthesis, processing and microstructural development.” J. Alloys Comp., 270, pp. 95–106.
  • Azad, A. M., Shyan, L. L. W., and Alim, M. A., 1999-a, “The AC electrical characterization of the solid-state reaction derived CaSnO3.” Journal of Materials Science, 34, pp. 3375–3396.
  • Azad, A. M., Shyan, L. L. W., and Alim, M. A. 1999-b, “Immittance response of CaSnO3 prepared by self-heat-sustained reaction.” Journal of Materials Science, 34, pp. 1175–1187.
  • Azad, A. M., Shyan, L. L., and Yen, P. T., 1999-c, “Synthesis, processing and microstructural characterization of CaSnO3 and SrSnO3 ceramics.” J. Alloys Comp., 282, pp. 109–124.
  • Canimoglu, A., Garcia-Guinea, J., Karabulut, Y., Ayvacikli, M., Jorge, A., and Can, N., 2015, “Catholuminescence properties of rare earth doped CaSnO3 phosphor.” Applied Radiation and Isotopes, 99, pp. 138–145.
  • Chen, Y. C., Chang, Y. H., and Tsai, B. S., 2005, “Synthesis and the luminescent properties of europium-activated Ca2SnO4 phosphors.” Optical Materials, 27, 1874–1878.
  • Chen, X. Y., Ma, C., Bao, S. P., and Zhang, H. Y., 2010, “Novel porous CaSnO3: Eu3+and Ca2SnO4: Eu3+phosphors by co-precipitation synthesis and postannealing approach: A general route to alkaline-earth stannates.” J. Alloys Comp., 497, pp. 354–359.
  • Cheng, H., and Lu, Z.G., 2008, “Synthesis and gas-sensing properties of CaSnO3 microcubes.” Solid State Sciences, 10, pp. 1042–1048.
  • Colin, R., Drowart, J., and Yerhaegon, G., 1965, “Mass-Spectrometric study of the vaporization of tin oxides.” Transactions of the Faraday Society, 61, pp. 1364–1371.
  • Gauzzi, F., 1985, “Analysis of in-situ SnO disproportionation.” Journal of Materials Science Letters, 4, pp. 1492–1494.
  • Gauzzi, F., and Verdini, B., 1985, “X-ray diffraction and Mössbauer analyses of SnO disproportionation products.” Inorganica Chimica Acta, 104, pp. 1–7.
  • Fu, Z., Yang, H. K., Moon, B. K., Choi, B. C., and Jeong, J. H., 2009, “Synthesis and luminescent properties of europium-activated Ca2SnO4 phosphors by sol-gel method.” Journal of Luminescence, 129, pp. 1669–1672.
  • Pfaff, G., 1995, “Chemical synthesis of calcium stannates from peroxo precursors.” Materials Science and Engineering B, 33, pp. 156–161.
  • Smith, A. J., and Welch, J. E., 1960, “Some mixed metal oxides of perovskite structure.” Acta Crystallogr, 13, pp. 653–656.
  • Su, Z. J., Zhang, Y. B., Liu, B. B., Zhou, Y. L., Jiang, T., and Li, G. H., 2016, “ Reduction behavior of SnO2 in the tin-bearing iron concentrates under CO-CO2 atmosphere. Part I: Effect of magnetite.” Powder Technology, accepted, doi: 10.1016/j.powtec.2015.12.047
  • Tanaka, Y., 1941, “Studies on the Reactions between Oxides in Solid State at Higher Temperatures. IV. The Reaction between Calcium Oxide and Stannic Oxide.” Bulletin of the Chemical Society of Japan, 17, pp. 70–75.
  • Vegas, A., Vallet-Regí, M., González-Calbet, J. M., and Alario-Franco, M. A., 1986, “The ASnO3 (A=Ca,Sr) perovskites.” Acta Crystallographica, 42, pp. 167–172.
  • Wang, Z. W., Wang, C. Y., and Lu, H. M., 2005, “Investigation on removal of tin from Sn-bearing iron concentrates by reduction roasting.” Mining and metallurgy, 14, pp. 63–66 (in Chinese).
  • Zhang, J. S., Chen, B. J., Liang, Z. Q., Li, X. P., Sun, J. S., Cheng, L. H., and Zhong, H. Y., 2014, “Optical transition and thermal quenching mechanism in CaSnO3: Eu3+phosphors.” J. Alloys Comp., 612, pp. 204–209.
  • Zhang, Y. B., 2006, “Research on physicochemical fundamental and new technology of Tin, Zinc-bearing complex iron concentrate pellets by weak reduction roasting.” PhD thesis Central South University, Changsha (in Chinese).
  • Zhang, Y. B., Jiang, T., Li, G. H., Huang, Z. C., and Guo, Y. F., 2011-a, “Tin and zinc separation from tin, zinc bearing complex iron ores by selective reduction process.” Ironmak. Steelmak., 38, pp. 613–619.
  • Zhang, Y. B., Chen, L. Y., Li, G. H., Jiang, T., and Huang, Z. C., 2011-b, “Mineralogical features and comprehensive utilization technology of tin, zincbearing iron concentrates.” Journal of Central South University (Science and Technology), 42, pp. 1501–1508.
  • Zhang, Y. B., Li, G. H., Jiang, T., Guo, Y. F., and Huang, Z. C., 2012, “Reduction behavior of tin-bearing iron concentrate pellets using diverse coals as reducers.” Int. J. Miner. Process., 110-111, pp. 109–116.
  • Zhang, Y. B., Su, Z. J., Zhou, Y. L., Li, G. H., and Jiang, T., 2013, “Reduction kinetics of SnO2 and ZnO in the tin, zinc-bearing iron ore pellet under a 20%CO–80%CO2 atmosphere.” Int. J. Miner. Process., 124, pp. 15–19.
  • Zhang, Y. B., Su, Z. J., Liu, B, B., Zhou, Y. L., Jiang, T., and Li, G. H., 2016, “Reduction behavior of SnO2 in the tin-bearing iron concentrates under CO-CO2 atmosphere. Part II: Effect of quartz” Powder Technology, 291, pp. 337–343.
  • Zhang, Y. B., Liu, B. B., Su, Z. J., Chen, J., Li, G. H., and Jiang, T., 2015, “Reductive volatilization of stannic oxide under different CO-CO2 atmospheres in the temperature range of 975–1100 ○C”, Int. J. Miner. Process, 144, pp. 33–39.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.