Relationship Between Iron Ore Granulation Mechanisms, Granule Shapes, and Sinter Bed Permeability

References

• Ball, D. F., Dartnell, J., Davison, J., Grieve, A., and Wild, R., 1973, Agglomeration of Iron Ores, New York: American Elsevier Publishing Company, pp. 118–383.
   Google Scholar
• Barksdale, R. D., Kemp, M. A., Sheffield, W. J., and Hubbard, J. L., 1991, Measurement of Aggregate Shape, Surface Area, and Roughness, Transportation Research Record 1301, Washington DC: National Research Council, pp. 107–116.
   Google Scholar
• Barrett, P. J., 1980, “The shape of rock particles, a critical review.” Sedimentology, 27, pp. 291–303.
   Web of Science ®Google Scholar
• Bhuiyan, I. U., 2011, Characterization of Iron Ore Green Pellets by Scanning Electron Microscopy and X-ray Microtomography, Thesis (PhD), Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, Luleå, Sweden.
   Google Scholar
• Blott, S. J. and Pye, K., 2008, “Particle shape: a review and new methods of characterization and classification.” Sedimentology, 55, pp. 31–63
   Web of Science ®Google Scholar
• Corey, T., 1949, Influence of Shape on the Fall Velocity of Sand Grains, Thesis (MS), Colorado Agricultural and Mechanical College, Fort Collins, Colorado, USA.
   Google Scholar
• De Beer, F. C., 2005, “Characteristics of the Neutron /X-ray tomography system at SANRAD facility in South Africa.” Nucl. Instr. Meth. Phys. Res. A, 542, pp. 1–8.
   Web of Science ®Google Scholar
• Ellis, B. G., Loo, C. E., and Witchard, D., 2007, “Effect of ore properties on sinter bed permeability and strength.” Ironmaking and Steelmaking, 34, pp. 99–108.
   Web of Science ®Google Scholar
• Ennis, B.J., and Litster, J.D., 1997. Particle size enlargement. In Perry, R. and D. Green (Eds.), Perry's Chemical Engineers’ Handbook, 7th edition, (pp. 20–89). New York, NY: McGraw-Hill.
   Google Scholar
• Erdoğan, S. T., 2003, The Effect of Aggregates on the Properties of Concrete and Proportioning Methods, M.S. Thesis, The University of Texas, Austin, Texas.
   Google Scholar
• Erdoğan, S. T., and Fowler, D. W., 2005, Determination of aggregate shape properties using X-ray topographic methods and the effect of shape on concrete rheology, Research Report: ICAR 106-1, International Centre for Aggregates Research, University of Texas, Austin.
   Google Scholar
• Ergun, S., 1952, “Fluid flow through the packed columns.” Chemical Engineering Progress, 48, pp. 89–94.
   Web of Science ®Google Scholar
• Garboczi, 2002, “Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: Application to aggregates used in concrete.” Cement and Concrete Research, 32, pp. 1621–1638.
   Web of Science ®Google Scholar
• Feldkamp, L. A., Davis, L. C., and Kress, J. W., 1984, “Practical cone-beam algorithm.” Journal of the Optical Society of America A, 1, pp. 612–619.
   Google Scholar
• Formoso, A., Moro, A., Fernández-Pello, G., Menéndez, J. L., Muñiz, M., and Cores, A., 2003, “Influence of nature and particle size distribution on granulation of iron ore mixtures used in sinter strand.” Ironmaking and Steelmaking, 30, pp. 6–7.
   Web of Science ®Google Scholar
• Hinkley, J., Waters, A. G., O’Dea, D., and Litster, J. D., 1994, “Voidage of ferrous sinter beds: new measurement technique and dependence on feed characteristics.” International Journal of Mineral Processing, 41, pp. 53–69.
   Web of Science ®Google Scholar
• Janke, N. C., 1966, “Effect of shape upon the settling velocity of regular convex geometric particles.” Journal of Sedimentary Petrology, 36, pp. 370–376.
   Web of Science ®Google Scholar
• Kapur, P. C., Kapur, P., and Fuerstenau, D. W., 1993, “An auto-layering model for the granulation of iron ore fines.” International Journal of Mineral Processing, 3, pp. 239–250.
   Web of Science ®Google Scholar
• Keyser, M. J., Conradie, M., Coertzen, M., Van Dyk, J. C., 2006. “Effect of coal particle size distribution on packed bed pressure drop and gas flow distribution.” Fuel, 85, pp. 1439–1445.
   Web of Science ®Google Scholar
• Khosa, J., and Manuel, J., 2007, “Predicting granulating behaviour of iron ores based on size distribution and composition.” Iron and Steel Institute of Japan International, 47, pp. 965–972.
   Web of Science ®Google Scholar
• Krumbein, W. C., 1941, “Measurement of geological significance of shape and roundness of sedimentary particles.” Journal of Sedimentary Petrology, 11, pp. 64–72.
   Google Scholar
• Krumbein, W. C., 1942, “Settling-velocity and flume-behaviour of non-spherical particles.” Transactions of the American Geophysical Union, pp. 621–633.
   Google Scholar
• Krumbein, W. C. and Sloss, L. L., 1963, Stratigraphy and Sedimentation, 2nd ed., San Francisco: W.H. Freeman.
   Google Scholar
• Litster, J. D. and Waters, A. G., 1986, “Fundamentals of granulation of iron ore for ferrous sinter production.” Chemica, 86, 72–77.
   Google Scholar
• Litster, J. D. and Waters, A. G., 1988, “Influence of material properties of iron sinter feed on granulation effectiveness.” Powder Technology, 55, pp. 141–151.
   Web of Science ®Google Scholar
• Loo, C. E., Williams, R. P., and Matthews, L. T., 1992, “Influence of material properties on high temperature zone reactions in sintering of iron ore.” Transactions of the Institutions of Mining and Metallurgy C, 101, pp. 7–15.
   Google Scholar
• Nyembwe, A. M., Cromarty, R., and Garbers-Craig, A. M., 2016, “Effect of concentrate and micropellet additions on iron ore sinter bed permeability.” Mineral Processing and Extractive Metallurgy, 125, pp. 178–186.
   Web of Science ®Google Scholar
• Powers, M. C., 1953, “A new roundness scale for sedimentary particles.” Journal of Sedimentary Petrology, 23, pp. 117–119.
   Google Scholar
• Shatokha, V., Korobeynikov, I., Maire, E., and Adrien, J., 2009, “Application of 3D X-ray tomography to investigation of structure of sinter mixture granules.” Ironmaking and Steelmaking, 36, pp. 416–420.
   Web of Science ®Google Scholar
• Rankin, W. J., Roller, P. W., and Batterham, R. J., 1985, “Analysis of the permeability of granulated iron sinter feeds using the Ergun equation.” Minerals and Metallurgical Processing, 278, pp. 51–59.
   Google Scholar
• Rankin, W. J., Roller, P. W., and Batterham, R. J., 1983, Quasi-particle formation and the granulation of iron ore sinter feeds: In Proc. Joint Symp.ISIJ and AIMM, Tokyo, pp. 13–28.
   Google Scholar
• Roller, P. W., 1982. Granulation of iron ores, BHP Technology Bulletin, 26, pp. 44–45.
   Google Scholar
• Yanrong, F., 2005, Experimental Quantification and DEM Simulation of Micro-macro Behaviours of Granular Materials using X-ray Tomography Imaging, PhD Thesis, the Graduate Faculty of the Louisiana State University, The Department of Civil and Environmental Engineering, USA.
   Google Scholar
• Venkataramana, R., Gupta, S. S., and Kapur, P. C., 1999, “A combined model for granule size distribution and cold bed permeability in the wet stage of iron ore sintering process.” International Journal of Mineral Processing, 57, pp. 43–58.
   Web of Science ®Google Scholar
• Voice, E. W., Brooks, S. H., and Gledhill, P. K., 1953, “The permeability of sinter beds.” Journal of the Iron and Steel Institute, 174, pp. 136–139.
   Web of Science ®Google Scholar
• Wadell, H., 1932, “Volume, shape, and roundness of rock particles.” Journal of Geology, 40, pp. 443–451.
   Google Scholar
• Wadell, H., 1933, “Sphericity and roundness of rock particles.” Journal of Geology, 41, pp. 310–331.
   Google Scholar
• Wadell, H., 1934, “Shape determination of large sedimental rock fragments.” The Pan-American Geologist, 61, pp. 187–220.
   Google Scholar
• Waters, A. G., Litster, J. D., and Nicol, S. K., 1989. A mathematical model for the prediction of granule size distribution for multicomponent sinter feeds, ISIJ Int. 29, pp. 274–283.
   Web of Science ®Google Scholar
• Witt, K., and Brauns, J., 1983, “Permeability-anisotropy due to particle shape.” Journal of Geotechnical Engineering, 109, pp. 1181–1187.
   Google Scholar
• Wooten, J. H., 1998, “Dense and sock catalyst loading compared.” Oil & Gas Journal, 12, pp. 66–70.
   Google Scholar
• Zingg, T., 1935, “Beitrag zur schotteranalyse.” Mineralogische und Petrologische Mitteilungen, 15, pp. 39–140.
   Google Scholar